• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.3
• /
• pp.471-479
• /
• 2001

The purpose of this study was to compare the effect of the high intensity halogen light $(850\sim1000mW/cm^2)$ with that of the conventional halogen light $(400mW/cm^2)$ on the hardness of composite resin. Three resin composites (Z-100, 3M, U.S.A. : Tetric Ceram, Vivadent, Liechtenstein; SureFil, Dentsply, U.S.A.) were filed in the stainless steel moulds which were 4mm in diameter and 2, 3, 4, and 5mm in depth, respectively. They were cured under the four different modes : (1) conventional mode, 40 seconds at $400mW/cm^2$; (2) 'ramp' mode, 10 seconds at 100 to $1000mW/cm^2$ plus 10 seconds at $1000mW/cm^2$; (3) 'boost' mode, 10 seconds at $1000mW/cm^2$; and (4) 'standard' mode, 20 seconds at $850mW/cm^2$. The surface hardnesses of the top and the bottom of the resin samples were measured with a microhardness tester (MXT70, Matsuzawa, Japan). The top surface hardness was not significantly different among the curing modes. The bottom surface hardness was generally the highest in the conventional mode and the lowest in the high intensity boost mode. There was no significant difference in the bottom surface hardness between the conventional mode and the high intensity standard mode in 2mm depth. The results suggest that the curing time of the high intensity halogen light $(850mW/cm^2)$ should be at least 20 seconds to produce the equal level of the bottom surface hardness of 2mm resin composite as compared to the hardness produced by the conventional halogen light $(400mW/cm^2)$.

• Korean Journal of Plant Resources
• /
• v.12 no.3
• /
• pp.240-252
• /
• 1999

Floristic composition and phytosociological studies of Mt. Chongok and Mt. Tuta were investigated, and that was compared with the previously published report in 1993. Vascular plants were composed of 100 families, 358 genera, 573 species, 95 varieties, and 18 formae, totaling 686 taxa. The vegetation was relatively well conserved based on Pteridophyta calculation (Pte-Q), 1.13. Compared with the vascular plants of the southern and northern slope area, the vascular plants of the southern slope area were composed of 87 families, 287 genera, 419 species, 73 varieties, and 11 formae, totaling 503 taxa, and those of the northern slope area consisted of 94 families, 293 genera, 427 species, 73 varieties, and 12 formae, totaling 512 taxa, respectively. Also, compared with the taxa in each side, both sides were composed of 332 species in common, southern sides, 172 species and northern sides, 182 species, respectively. The number of species of 11 families belonged to the higher level among total families taxa was composed of 328 species(47.8%). Among them, Compositae and Rosaceae were included much more species than remnant families. Korean endemic species were composed 16 families, 24 genera, 20 species, 8 varieties and 2 formae, totaling 30 species(4.4%). Compared with the Korean endemic taxa in each side, both sides were composed of 14 species in common, southern sides, 11 species and northern sides, 5 species, respectively. A naturalized plants were 20 species, correspond to 9.2% of totaling 218 species appeared in South Korea. Among them,12 species were appeared commonly in both sides, southern sides, 16 species and northern sides, 16 species, respectively. Life form spectra was H-D1-R5-e type and, useful resources plants are as follows; edible source(42.4%), medicinal source(31.5%), ornamental source(15.6%) and pasture source (13.3%) in the total region. The forest vegetation of the southern slope was classified into 1 order, 1 alliances and 5 communities; Rhododendro-Quercetalia mongolicae, Lindero-Quercion mongolicae, Quercus mongolica Typical community, Populus davidiana-Quercus mongolica community, Pinus koraiensis-Taxus cuspidata community, Pinus densiflora-Carex humilis var. nana community, Betula costata-Betula ermanii community. It is considered that the slight difference of the flora and vegetation in the northern and southern slope is mostly due to the topographical and climatic difference. Even closer investigation is required for the more accurate comparison in this area.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.96-108
• /
• 1982

Pinus is one of the most important species supplying domestic industrial timbers such as constitutional lumber, pulpwood, and mine props. It occupies nearly 50 percent of the total forest resources in Korea. With above conception, to develop this forest resources and to obtain the basic data on the reasonable and effective utilization of Pinus, this study was carried out. Five species (P. koraiensis S. et Z., P. densiflora S. et Z., P. thunbergii Parlat, P. densiflara far erecta, P. rigida Miller) grown in Kwangnoong experimental forest stand, Chungcheongnam-Do, and Gangwon-Do regions were selected as sample trees. Anatomical, physical, mechanical and chemical properties of them were investigated.

• Restorative Dentistry and Endodontics
• /
• v.27 no.2
• /
• pp.158-174
• /
• 2002

The aim of this study was to investigate the effect of light irradiation modes on polymerization shrinkage, degree of cure and microleakage of a composite resin. VIP$^{TM}$ (Bisco Dental Products, Schaumburg, IL, USA) and Optilux 501$^{TM}$ (Demetron/Kerr, Danbury, CT, USA) were used for curing Filtek$^{TM}$ Z-250 (3M Dental Products, St. Paul., MN, USA) composite resin using following irradiation modes: VIP$^{TM}$ (Bisco) 200mW/$\textrm{cm}^2$ (V2), 400mW/$\textrm{cm}^2$ (V4), 600mW/$\textrm{cm}^2$ (V6), Pulse-delay (200 mW/$\textrm{cm}^2$ 3 seconds, 5 minutes wait, 600mW/$\textrm{cm}^2$ 30seconds, VPD) and Optilux 501$^{TM}$ (Demetron/Kerr) C-mode (OC), R-mode (OR). Linear polymerization shrinkage of the composite specimens were measured using Linometer (R&B, Daejeon, Korea) for 90 seconds for V2, V4, V6, OC, OR groups and for up to 363 seconds for VPD group (n=10, each). Degree of conversion was measured using FTIR spectrometer (IFS 120 HR, Bruker Karlsruhe, Germany) at the bottom surface of 2 mm thick composite specimens V2, Y4, V6, OC groups were measured separately at five irradiation times (5, 10, 20, 40, 60 seconds) and OR, VPD groups were measured in the above mentioned irradiation modes (n=5 each). Microhardness was measured using Digital microhardness tester (FM7, Future-Tech Co., Tokyo, Japan) at the top and bottom surfaces of 2mm thick composite specimens after exposure to the same irradiation modes as the test of degree of conversion(n=3, each). For the microleakage test, class V cavities were prepared on the distal surface of the ninety extracted human third molars. The cavities were restored with one of the following irradiation modes : V2/60 seconds, V4/40 seconds, V6/30 seconds, VPD , OC and OR. Microleakage was assessed by dye penetration along enamel and dentin margins of cavities. Mean polymerization shrinkage, mean degree of conversion and mean microhardness values for all groups at each time were analyzed using one-way ANOVA and Duncan's multiple range test, and using chi-square test far microleakage values. The results were as follows : . Polymerization shrinkage was increased with higher light intensity in groups using VIP$^{TM}$ (Bisco) : the highest with 600mW/$\textrm{cm}^2$, followed by Pulse-delay, 400mW/$\textrm{cm}^2$ and 200mW/$\textrm{cm}^2$ groups, The degree of polymerization shrinkage was higher with Continuous mode than with Ramp mode in groups using Optilux 501$^{TM}$ (Demetron/Kerr). . Degree of conversion and microhardness values were higher with higher light intensity. The final degree of conversion was in the range of 44.7 to 54.98% and the final microhardness value in the range of 34.10 to 56.30. . Microleakage was greater in dentin margin than in enamel margin. Higher light intensity showed more microleakage in dentin margin in groups using VIP$^{TM}$ (Bisco). The microleakage was the lowest with Continuous mode in enamel margin and with Ramp mode in dentin margin when Optilux 501$^{TM}$ (Demetron/Kerr) was used.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.431-438
• /
• 2003

This study investigates pulp chamber temperature rise during composite resin polymerization by plasma arc(Group III : Flipo 3 sec, Group IV : Flipo 5 sec) and LED curing units(Group V : Lux-O-Max, 40 sec) as well as conventional halogen lamp curing units(Group I : VIP mode3, 20 sec, Group II : VIP mode6, 20 sec). The results are as follows : 1. All of the investigated pulp chamber temperature rises are lower than the boundary temperature could result in irreversible damage to the pulpal tissue ($5.5^{\circ}C$). 2. In the group II, it is found the significantly higher pulp chamber temperature rise than any other groups(p<0.05). 3. In the group of composite resin light-cured with VIP, it is found the significantly higher pulp chamber temperature rise in the group II than group I(p<0.05). 4. In the group of composite resin light-cured with Flipo, it is found the significantly higher pulp chamber temperature rise in the group IV than group III (p<0.05). 5. In the case of comparing VIP and Flipo, group II is significantly higher pulp chamber temperature rise than group III, IV(p<0.05), and group IV is significantly higher pulp chamber temperature rise than group I(p<0.05), and it does not significantly differ between group I and III. 6. In the group of composite resin light-cured with Lux-O-Max, it is found the significantly lower pulp chamber temperature rise than any other groups (p<0.05).

• Reproductive and Developmental Biology
• /
• v.28 no.3
• /
• pp.203-207
• /
• 2004

The transgenic mice carrying human Interleukin-10 (hIL-10) gene in conjunction with bovine (3 -casein promoter express hIL-10 in milk during lactation. In this study, stability of germ line transmission and expression of hIL-10 transgene integrated into host chromosome were monitored up to generation F8 of transgenic mice. When male mouse of generation F8 was crossbred with normal females, approximately half of offspring (50.9±5.8%) were identified as transgenic mice. Generation F9 to F15 mice also showed similar transmission rates (66.0±20.1%, 61.5±16.7%, 41.1±8.4%, 40.7±20.3%, 61.3±10.8%, 49.2±18.8% and 43.8±25.9%, respectively), implying that hIL-10 transgene can be transmitted stably up to long term generation in the transgenic mice. Expression levels of human IL-10 from milk of generation F9 to F14 mice were 3.6± 1.2 mg/ml, 4.2±0.9 mg/ml, 5.7±1.5 mg/ml, 6.3±3.5 mg/ml, 6.8±4.5 mg/ml and 6.8±3.1 mg/ml, respectively, which was showed high-level expression compared with that of generation F1 (1.6 mg/ml) mice. In conclusion, our results suggest that transgenic mice can be continuously passed their transgenes to the progeny through the breeding program with the same productivity of human IL-10 protein in their milk.

• Journal of Korean Society of Forest Science
• /
• v.70 no.1
• /
• pp.1-6
• /
• 1985

The purpose of this experiment lies in finding the most appropriate cutting condition of Taxus cuspidata Sieb. et Zucc. which has been considered valuable tree species in gardening. Statistical analysis was focused on the comparison of the average ratios of rooting between greenhouses and fields, based on the observation rooted autogenis. To conduct this survey, hardwood cutting of Taxus cuspidata Sieb. et Zucc. were performed at both places of experiment above on April 20, 1982 with rooting results calculated on October 31, 1982. After formation of cuttings, it was soaked in IBA 200 ppm for 12 hours and than put in a bed. A summary of the result is presented as follows; 1) Cutting at the greenhouse showed higher average rate of rooting than at fields. Same tendency was found regardless of the differences in treatment. 2) It was clear that IBA-treatment contributed remarkably to causing higher average rooting rate. As an evidence, when twenty centimeter cuttings were inserted sandy media, IBA-treated area resulted in eighty six percent of average rooting rate, as compared with only twenty three percent in nontreatment case. In case of field cutting, IBA-treatment brought about fifty three percent of rooting in comparison with eleven percent nontreatment. 3) When sandy soil, loam and brown soil were separately used as cutting media, the highest rooting rate was found in case of sandy soil, without any difference between the two experimental places above. 4) As a result of the analysis to seek the impact of the length of cuttings on rooting, the range of length form fifteen to twenty centimeter was apparently most appropriate. It was also found that the rate of rooting declined beyond twenty five centimeter. 5) Two kinds of rooting pattern were observed. One was the case that callus cell lump was created on the lower cut side of cuttings. Importantly, root radical were formed inside the lump to influence the germination of root system. The other relates to the case that adventitious root which look like lateral roots appeared at the stem region. In abstract, first, sandy soil was effectively recommended in case of hardwood cutting in April. Second, the most appropriate length of cuttings ranged between fifteen and twenty centimeters. Third, high density IBA treatment was clearly effective. Forth, for proper environmental management, both pre-disinfection of sail by sterilizer and maintenance of high relative humidity were essentially required.

• Korean journal of food and cookery science
• /
• v.20 no.5
• /
• pp.468-479
• /
• 2004

This study was conducted to investigate factors affecting the bone density of university students in the Seoul area. Data for food habits, and dietary and health-related behavior was obtained by self-administered questionnaires. BQI (bone quality index) of the subjects was measured by a Quantitative Ultrasound (QUS). The results are summarized as follows. The average height, weight, BMI and osteopenia percentage were 175.4cm, 69.3kg, 22.5 and 15.6% for male students, and 161.5cm, 55.9kg, 21.7 and 34.1%, for female students, respectively. The mean BQI of the subjects was 110.25 (range 60.7 ～ 176.8) in male students and 90.64 (range 52.9 ～ 137.5) in female students. Height and weight were significantly related with BQI in the female group but the relationship with BMI was not significantly related with bone density in either group. BQI was positively affected by nutrition supplement in the male student group. One-side eating, diet, and intake of milk and instant food were not significantly related with BQI in males or females. The results of this study revealed that desirable food habits, dietary behavior and health-related lifestyle may have a beneficial effect on bone density. There should be established a practically and systematically organized nutritional education on optimum body weight, good eating habits, weight bearing exercise and intakes of good quality nutrient for higher bone density level.

• Progress in Medical Physics
• /
• v.16 no.2
• /
• pp.62-69
• /
• 2005

The purpose of this study has been performed to investigate the possibility of external audit program using thermoluminescence dosimetry for electron beam in korea. The TLD system consists of LiF powder, type TLD-700 read with a PCL 3 reader. In order to determine a calibration coefficient of the TLD system, the reference dosimeters are irradiated to 2 Gy in a $^{60}CO$ beam at the KFDA The irradiation is performed under reference conditions is water phantom using the IAEA standard holder for TLD of electron beam. The energy correction factor is determined for LiF powder irradiated of dose to water 2 Gy in electron beams of 6, 9, 12, 16 and 20 MeV (Varian CL 2100C). The dose is determined according to the IAEA TRS-398 and by measurement with a PTW Roos type plane-parallel chamber. The TLD for each electron energy are positioned in water at reference depth. In this study, to verify of the accuracy of dose determination by the TLD system are performed through a 'blind' TLD irradiation. The results of blind test are $2.98\%,\;3.39\%\;and\;0.01\%(1\sigma)$ at 9, 16, 20 MeV, respectively. The value generally agrees within the acceptance level of $5\%$ for electron beam. The results of this study prove the possibility of the TLD quality assurance program for electron beams. It has contributed to the improvement of clinical electron dosimetry in radiotherapy centers.

• Journal of Hospice and Palliative Care
• /
• v.22 no.4
• /
• pp.185-197
• /
• 2019

Purpose: Hospice volunteers are serving an invisible yet pivotal role in the hospice and palliative care team. This study investigated how effectively a continuing education program could enhance hospice volunteers' competency. Methods: A total of 20 hours (four hours per week) of training was provided to 30 hospice volunteers who participated in the continuing education for hospice volunteers. Efficiency of the education was analyzed with an exploratory mixed-methods design. For quantitative analysis, the volunteers were asked, before and after the training, about their attitudes towards hospice care, what makes a meaningful life, self-efficacy and satisfaction with their volunteer service. Descriptive statistics, paired t-tests, and Wilcoxon signed-rank test were performed using SPSS Window 20.0. For qualitative research, participants were placed in three groups for a focus group interview, and data were analyzed by content analysis. Results: A quantitative study result shows that this training can significantly affect hospice volunteers' attitudes and improve their self-efficacy. A qualitative study result shows that participants wanted to receive continuous education from the physical/psychosocial/spiritual aspects to better serve end-of-life patients and their family members even though they have to spare significant time for the volunteer service. They wanted to know how to take good care of patients without getting themselves injured and how to provide spiritual care. Conclusion: The continuing education program reflecting volunteers' requests is strongly needed to improve their competency. An effective continuing education requires continuous training and support in areas where hospice volunteers are interested in. A good alternative is to combine web-based and hands-on training, thereby allowing hospice volunteers freely take training that suits their interest.