• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.97-105
• /
• 2018

Purpose : Proton Therapy using Bragg-peak, because it has distinct characteristics in providing maximum dosage for tumor and minimal dosage for normal tissue, a medical imaging system that can quantify changes in patient position or treatment area is of paramount importance to the treatment of protons. The purpose of this research is to evaluate the usefulness of the algorithm by comparing the image matching through the set-up and in-house code through the existing dips program by producing a Matlab-based in-house registration code to determine the error value between dips and DRR to evaluate the accuracy of the existing treatment. Materials and Methods : Thirteen patients with brain tumors and head and neck cancer who received proton therapy were included in this study and used the DIPS Program System (Version 2.4.3, IBA, Belgium) for image comparison and the Eclipse Proton Planning System (Version 13.7, Varian, USA) for patient treatment planning. For Validation of the Registration method, a test image was artificially rotated and moved to match the existing image, and the initial set up image of DIPS program of existing set up process was image-matched with plan DRR, and the error value was obtained, and the usefulness of the algorithm was evaluated. Results : When the test image was moved 0.5, 1, and 10 cm in the left and right directions, the average error was 0.018 cm. When the test image was rotated counterclockwise by 1 and $10^{\circ}$, the error was $0.0011^{\circ}$. When the initial images of four patients were imaged, the mean error was 0.056, 0.044, and 0.053 cm in the order of x, y, and z, and 0.190 and $0.206^{\circ}$ in the order of rotation and pitch. When the final images of 13 patients were imaged, the mean differences were 0.062, 0.085, and 0.074 cm in the order of x, y, and z, and 0.120 cm as the vector value. Rotation and pitch were 0.171 and $0.174^{\circ}$, respectively. Conclusion : The Matlab-based In-house Registration code produced through this study showed accurate Image matching based on Intensity as well as the simple image as well as anatomical structure. Also, the Set-up error through the DIPS program of the existing treatment method showed a very slight difference, confirming the accuracy of the proton therapy. Future development of additional programs and future Intensity-based Matlab In-house code research will be necessary for future clinical applications.

• The Korean Journal of Pesticide Science
• /
• v.19 no.3
• /
• pp.218-229
• /
• 2015

The proficiency testing for the residue laboratories of pesticide registration was conducted in order to improve the reliability and the ability for pesticide residue analysis. On November 2012 the testing was carried out using the soil collected and kept as the moistened state for five years, which was expected to very low residue levels of pesticides. The soil was fortified with azoxystrobin, imidacloprid and methabenzthiazuron in a manner similar to prepare soil samples for indoor soil degradation test, and then sub-samples were prepared for the distribution to participants. Some of them were randomly selected for confirm of homogeneity and to ensure the stability of samples at room temperature. Samples were consisted of two soils treated as different levels, one of which was used to the assessment and another used to confirm. In addition, provided three standard solutions, respectively concentration of 10 mg/L, and untreated soil. Forty eight institutions submitted results. The medians of results were used as the assigned values for pesticide residues. Fitness for purpose standard deviation of proficiency test was calculated by applying 20% RSD as the coefficient of variation allowed in the soil residue test. Z-score was applied for evaluation of individual pesticides, and the average of the absolute value of the Z-score for the overall assessment of pesticides. Laboratories evaluated the absolute value of the Z-score less than 2 to fit the case of azoxystrobin were 48, imidacloprid and methabenzthiazuron 46.

• Korean Journal of Environmental Agriculture
• /
• v.14 no.2
• /
• pp.202-212
• /
• 1995

In order to elucidate the degrading characteristics of the pyrethroid acaricide-insecticide, acrinathrin in two different types of soils, Soil A(pH, 5.8; organic matter, 3.4%; C.E.C., 115 mmol(+)/kg soil; texture, sandy loam) and Soil B(pH, 5.7; organic matter, 2.0%; C.E.C., 71 mmol(+)/kg soil; texture, sandy loam), residualities of the non-labeled compound under the field and laboratory conditions, extractability with organic solvents and formation of non-extractable bound residues, and degradabilities of [$^{14}C$]acrinathrin as a function of aging temperature and aging period were investigated. The half lives of acrinathrin in Soil A treated once and twice were about 18 and 22 days and in Soil B about 13 and 15 days, respectively, in the field, whereas, in the laboratory, those in Soil A and B were about 36 and 18 days, respectively, suggesting that the compound would be non-persistent in the environment. The amounts of $^{14}CO_2$ evolved from [$^{14}C$]acrinathrin in Soil A and B during the aging period of 24 weeks were 81 and 62%, respectively, of the originally applied $^{14}C$ activity, and those of the non-extractable soil-bound residues of [$^{14}C$]acrinathrin were about 70% of the total $^{14}C$ activity remaining in both soils, increasing gradually with the aging period. Degradation of [$^{14}C$]acrinathrin in both soils increased with the aging temperature. Three degradation products of m/z 198(3-phenoxy benzaldehyde), m/z 214(3-phenoxybenzoic acid), and m/z 228(methyl 3-phenoxybenzoate) as well as an unknown were detected by autoradiography of acetone extracts of both soils treated with [$^{14}C$]acrinathrin and aged for 15, 30, 60, 90, 120, and 150 days, respectively, and the degradation pattern of acrinathrin was identical in both soils. Acrinathrin in soil turned out to be degraded to 3-phenoxybenzaldehyde cyanohydrin by hydrolytic cleavage of the ester linkage adjacent to the $^{14}C$ with a cyano group, the removal of hydrogen cyanide therefrom led to the formation of 3-phenoxybenzaldehyde as one of the major products, and the subsequent oxidation of the aldehyde to 3-phenoxybenzoic acid, followed by decarboxylation would lead to the evolution of $^{14}CO_2$.

• The Korean Journal of Pesticide Science
• /
• v.17 no.2
• /
• pp.94-106
• /
• 2013

The proficiency testing for the residue laboratories of pesticide registration was conducted in order to improve the reliability and the ability for pesticide residue analysis. On October 2011 the testing was carried out using the soil collected and kept as the moistened state for five years, which is expected to very low residue levels of pesticides. The soil was fortified with chlorpyrifos, metolachlor and procymidone in a manner similar to prepare soil sample for indoor soil degradation test, and then sub-samples were prepared for the distribution to participants. Some of them were randomly selected for confirm of homogeneity and to ensure the stability of samples at room temperature. Samples were consisted of two soil treated as different levels, one of which was used to the assesment and another used to confirm. In addition, provide three standard solutions, respectively concentration of 10 mg/L, and untreated soil. Forty seven institutions submitted results. The medians of results were used as the assigned values for pesticide residues. Fitness for purpose standard deviation of proficiency test was calculated by applying 20% RSD as the coefficient of variation allowed in the soil residue test. Z-score was applied for evaluation of individual pesticides, and the average of the absolute value of the Z-score for the overall assessment of pesticides. Laboratories evaluated the absolute value of the Z-score less than 2 to fit the case of chlorpyrifos and procymidone were 44, metolachlor 40.

• Journal of Food Hygiene and Safety
• /
• v.15 no.2
• /
• pp.144-150
• /
• 2000

The present study was peformed to determine the hydrolysis rate constants and degradation products of phosphamidon and proffnofos by the OECD method. Hydrolysis rate constants of phosphamidon in pH 4, pH 7, and pH 9 buffer solutions at 25 and 40$^{\circ}$C were 0.0020, 0.0022, 0.0049 and 0.0040, 0.0050, 0.0150, respectively. Hydrolysis rate of phosphamidon was accelerated by temprerature change under same pH conditions, and half-life of phosphamidon in pH 9 at 40。C was 3 times faster than that at 25。C. Hydrolysis rate of phosphamidon in alkaline solution(pH 9) was 2~4 times faster than that in acidic solution(pH 4) and neutral solution(pH 7) under same temperature. Hydrolysis rate constants of profenofos in pH 4, pH 7, and pH 9 buffer solutions at 25 and 40。C were 0.0022, 0.0047, 0.0860 and 0.0035, 0.0086, 0.1245, respectively. Hydrolysis rate of profenofos was accelerated by temprerature change under same pH conditions. Hydrolysis rate of profenofos in alkaline solution(pH 9) was 15~40 times faster than in acidic solution(pH 4) and neutral solution(pH 7) under same temperature condition, and half-life of profenofos was very fast within 8 hours. The hydrolysis rate of profenofos was faster than that of phosphamidon. In order to identify hydrolysis products, the extracts of degradation products were analyzed by GC/MS. The mass spectra of hydrolysis products of phosphamidon were at m/z 153 and 149, those of the profenofos were at m/z 208 and 240, respectively. The hydrolysis products of phosphamidon were O, O-dimethyl phosphate(DMP) and N, N-diethylchloroacetamide, and those of profenofos were 4-bromo-2-chlorophenol and O-ethyl-S-propyl phosphate.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.3
• /
• pp.504-511
• /
• 2001

Preventive resin restoration, extended concept of occlusal pit and fissure sealing, is procedure composed of as follows. Cavity preparation is limited to areas of initial caries The cavity is then restored with composite resin, while other sound pits and fissures are sealed with pit and fissure sealant. If pit and assure sealant with which microrestoration is possible is used, it may be of great benefit to both patient and operator in case of difficult-to-control children s treatment. However study on preventive resin restoration using this kind of materials have been scarce. The purpose of this study was to compare the microleakage of four different modes of preventive resin restoration. Restoration using only composite resin was compared together Fifty-five bicuspids were prepared with small class I cavity preparation on the occlusal surface, divided into the following groups and restored accordingly. Group 1 : Cavity was restored with Z-100 composite resin Group 2 : Cavity was restored with Z-100 composite resin. Pits and fissures were then sealed with Teethmate F-1 Group 3 : Cavity was restored with Z-100 composite resin Pits and fissures were then sealed with Ultraseal XT-plus Group 4 : Cavity and pits and fissures were restored with Ultraseal XT-plus altogrether Group 5 : Cavity was restored with Ultraseal XT-plus. Pits and fissures were then sealed with the same material. After restoration, the samples were thermocycled 500 times between $5^{\circ}C$ and $55^{\circ}C$ with a dwell time of 30 seconds. After thermocycling, the samples were dipped into 1% methylene blue solution for 24 hours, then rinsed with tap water. The teeth were then embedded in resin and cut buccolingually along the tooth axis and observed with a stereomicroscope to determine the degree of microleakage. The results were as follows : 1. Group 4 showed the greatest microleakage, while group 3, showed the least. The mean microleakage decreased in the following order:4>1>5>2>3. 2. There was no stastically significant difference between group 1 and group 5(p>0.05). However, group 1 showed significantly greater microleakage compared to group 2 and 3(p<0.05) Group 1 showed significantly less microleakage compared to group 4(p<0.05). 3. Group 2 showed no statistically significant difference compared to group 3(p>0.05). However group 2 showed significantly less microleakage compared to group 4 and 5(p<0.05) 4. Group 3 showed significantly less microleakage compared to group 4 and 5(p<0.05). 5. Group 5 showed significantly less microleakage than group 4(p<0.05).

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.71-80
• /
• 2012

Vinca alkaloids produced from Catharanthus roseus are one of the most important natural product drugs in treatments of human cancers. These anticancer drugs are derived from coupling of the two monomeric indole alkaloids, catharanthine and vindoline. In order to investigate vindoline biosynthesis, tabersonine-$CD_3$ 1a is synthesized to use as a deuterium labeled precursor, which is distinguished clearly from the natural counterpart. We show that these deuterium labeled tabersonine 1a are successfully incorporated into the vindoline biosynthetic pathway to yield three deuterated vindoline intermediates. 16-Hydroxytabersonine-$CD_3$ (m/z 356) 2a, 16-Methoxytabersonine-$CD_3$ (m/z 370) 3a, 16-Methoxy-2,3-dihydro-3-hydroxytabersonine-$CD_3$ (m/z 388) 4a are produced from the cell suspension culture measured by UPLC/MS at 5 and 13 days after feeding tabersonine. The conversion rates from 1a to 2a and 2a to 3a are fast, whereas that from 3a to 4a is much slower. This indicates that the rate determining step among the first three vindoline biosynthesis is the last step. As a result of the slow conversion rate from 3a to 4a, the accumulation level of 16-Methoxytabersonine-$CD_3$ 3a is significantly increased up to 13 days. The accumulation ratio among 2a, 3a and 4a is 1, 2 and 0.1 at 5 days. However, the peaks of desacetoxyvindoline-$CD_3$ 5a, deacetylvindoline-$CD_3$ 6a and vindoline-$CD_3$ 7a are not found from the cell extracts even after 13 days of incubation which may indicate no presence of their corresponding enzymes.

• Cartoon and Animation Studies
• /
• s.24
• /
• pp.49-64
• /
• 2011

Comics is sequential art. In comics, the story is developped by its sequential panels which have their own sizes and sites. Accordingly, comics is closer to 'space' art than text. The reading order in a page of comic book follows the human long-standing reading habit, and it is the same as that of textbook. When we read a korean comic book, our eyes run from left to right, and downward on the page. But some factors related to panels or comic structures can change the typical reading order. Meanwhile, breaking the typical reading order is easier in the "infinite canvas" by reason of unconstrained spatial composition. This paper introduces the factors that change the comic book readers' reading order and proposes a tablet PC comic book layout which includes an arbitrary reading path using interaction

• Corrosion Science and Technology
• /
• v.5 no.4
• /
• pp.117-122
• /
• 2006

Hydrogen permeation measurements have been carried out on API X65 grade linepipe steel. In order to study the effect of steel microstructure on hydrogen diffusion behavior in linepipe steel, the accelerated cooling condition was applied and then three different kinds of microstructures were obtained. Hydrogen permeation measurement has been performed in reference to modified ISO17081 (2004) and ZIS Z3113 method. Hydrogen trapping parameters in these steels were evaluated in terms of the effective diffusivity ($D_{eff}$), permeability ($J_{ss}L$) and the amount of diffusible hydrogen. In this study, microstructures which affect both hydrogen trapping and diffusion were degenerated pearlite (DP), acicular ferrite (AF), bainite and martensite/austenite constituents (MA). The low $D_{eff}$ and $J_{ss}L$ mean that more hydrogen can be trapped reversibly or irreversibly and the corresponding steel microstructure is dominant hydrogen trapping site. The large amount of diffusible hydrogen means that corresponding steel microstructure is predominantly reversible. The results of this study suggest that the hydrogen trapping efficiency increases in the order of DP, bainite and AF, while AF is the most efficient reversible trap.

• Smart Structures and Systems
• /
• v.3 no.2
• /
• pp.133-146
• /
• 2007

This paper addresses a new type of broad and stage-based hybrid carbon fiber reinforced polymer (HCFRP) sensor that is suitable for the sensing of infrastructures. The HCFRP sensors, a type of composite sensor, are fabricated with three types of carbon tows of different strength and moduli. For all of the specimens, the active materials are carbon tows by virtue of their electrical conductivity and piezoresistivity. The measurement principles are based on the micro- and macro-fractures of different types of carbon tows. A series of experiments are carried out to investigate the sensing performances of the HCFRP sensors. The main variables include the stack order and volume fractions of different types of carbon tows. It is shown that the change in electrical resistance is in direct proportion to the strain/load in low strain ranges. However, the fractional change in electrical resistance (${\Delta}R/R_0$) is smaller than 2% prior to the macrofractures of carbon tows. In order to improve the resistance changes, measures are taken that can enhance the values of ${\Delta}R/R_0$ by more than 2 times during low strain ranges. In high strain ranges, the electrical resistance changes markedly with strain/load in a step-wise manner due to the gradual ruptures of different types of carbon tows at different strain amplitudes. The values of ${\Delta}R/R_0$ due to the fracture of high modulus carbon tows are larger than 36%. Thus, it is demonstrated that the HCFRP sensors have a broad and stage-based sensing capability.