• Transactions of the Korean hydrogen and new energy society
• /
• v.8 no.3
• /
• pp.121-129
• /
• 1997

$ZrV_{0.1}Mn_{0.7}Ni_{1.2}$ alloy ingot (bulk alloy) made by the arc melting was found to be consisting of mostly of $ZrV_{0.2}Mn_{0.98}Ni_{1.04}$ matrix alloy and $ZrV_{0.01}Mn_{0.13}Ni_{1.2}$ 2nd phase alloy. The former alloy had the form of the C15 type Laves alloy structure and the latter one had the intermetallic compound structure of $Zr_9Ni_{11}$. In order to investigate the effect of these two phases on the electrochemical charge-discharge characteristics of bulk $ZrV_[0.1}Mn_0.7}Ni_{1.2}$ alloy, the matrix and the 2nd phase alloys were fabricated separately by arc melting method and their electrochemical characteristics were studied and compared with the bulk alloy. It was found that the discharge capacity was the lowest of 160 mAh/g in the 2nd phase alloy. The matrix alloy exhibited 200 mAh/g. Both were lower than that of the bulk alloy of 250 mAh/g. The matrix and the bulk alloys showed a similar properties in the activation stage, the high rate dischargeability and the self discharge characteristics. Also a signigicant capacity decrease was observed after activation in both alloys. Whereas the 2nd phase alloy showed the very different characteristics. This alloy was found to be difficult to activate. However the capacity was remained constant after the activation. Also the self discharge rate was seen to be better than those of the matrix and the bulk alloys.

• Imaging Science in Dentistry
• /
• v.45 no.1
• /
• pp.15-22
• /
• 2015

Purpose: This study was performed to assess the reproducibility of identifying the sella turcica landmark in a three-dimensional (3D) model by using a new sella-specific landmark reference system. Materials and Methods: Thirty-two cone-beam computed tomographic scans (3D Accuitomo$^{(R)}$ 170, J. Morita, Kyoto, Japan) were retrospectively collected. The 3D data were exported into the Digital Imaging and Communications in Medicine standard and then imported into the Maxilim$^{(R)}$ software (Medicim NV, Sint-Niklaas, Belgium) to create 3D surface models. Five observers identified four osseous landmarks in order to create the reference frame and then identified two sella landmarks. The x, y, and z coordinates of each landmark were exported. The observations were repeated after four weeks. Statistical analysis was performed using the multiple paired t-test with Bonferroni correction (intraobserver precision: p<0.005, interobserver precision: p<0.0011). Results: The intraobserver mean precision of all landmarks was <1 mm. Significant differences were found when comparing the intraobserver precision of each observer (p<0.005). For the sella landmarks, the intraobserver mean precision ranged from $0.43{\pm}0.34mm$ to $0.51{\pm}0.46mm$. The intraobserver reproducibility was generally good. The overall interobserver mean precision was <1 mm. Significant differences between each pair of observers for all anatomical landmarks were found (p<0.0011). The interobserver reproducibility of sella landmarks was good, with >50% precision in locating the landmark within 1 mm. Conclusion: A newly developed reference system offers high precision and reproducibility for sella turcica identification in a 3D model without being based on two-dimensional images derived from 3D data.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.10 no.1
• /
• pp.37-47
• /
• 1977

Korea started the Atlantic tuna fishery from 1964 by means of longline, then added bait-boats in 1972. Both fisheries have given the top priority to catch yellowfin tuna(Thunnus albacares). The paper reviews available catch, effort and biological data, estimates some population parameters in order to understand the status of the Atlantic yellowfin tuna as a whole. The main findings are summarized as follows: 1. The total of 476 million hook-equivalent fishing effort was thrown to catch yellowfin tuna in 1974, among which one thired was shared by longliners. 2. The dominant age group becomes younger in both surface and longline fisheries. 3. The recent mortality coefficients were calculated as 1.5 for total mortality and 0.7 for fishing mortality. 4. The weight at recruitment was 2.7 kg in 1973 which was smaller than the regulation size(3.2kg) proposed by ICCAT. 5. The maximum sustained yield was calculated to 95-145 thousand metric tons, which was the level of recent catch. Therefore, it is apparent that the present yellowfin tuna fishery should continue to receive close attention.

• Korean Journal of Ecology and Environment
• /
• v.49 no.2
• /
• pp.80-88
• /
• 2016

In order to reconstruct a benthic foodweb structure and assess the role of benthic microalgaes as a diet source for benthos, we analyzed the carbon and nitrogen stable isotopes of diverse benthos (bivalves, crustaceans, gastropods and fishes) and potential diets (particulate organic matter, sedimentary organic matter, benthic microalgae, seagrass, and macroalgaes) in the intertidal mudflat surrounding Yeongheung Island. The ${\delta}^{13}C$ values of the diets indicated wide ranges (- 26.5‰ to - 8.4‰) while benthos showed a small range of ${\delta}^{13}C$ values (-12.1‰ to - 17.8‰), although they were in the same range. Except for green algaes among the macroalgaes as well as sedimentary organic matter, ${\delta}^{15}N$ values of the diet candidates ($5.7{\pm}1.0$‰) were lighter in comparison to those of the benthos ($11.8{\pm}1.9$‰). Based on the ${\delta}^{13}C$ and ${\delta}^{15}N$ data, the benthos were classified into 3 groups, indicating a different diet and trophic position. But benthic microalgae is the most important diet source for all three benthos groups based on their stable isotope ratios, suggesting benthic microalgae should be a main diet to the intertidal ecosystem. Hence this study highlights that the biomass of benthic microalgae as biological resource should be evaluated for the management of the intertidal ecosystem of Yeongheung Island.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.5
• /
• pp.499-503
• /
• 1995

The performance records of 410 Holstein Friesian crossbred cows belonging to seven genetic groups (Fl, 3/4, 1/4, 5/8, 3/8, triple cross and miscellaneous cross) maintained at Livestock Production Research Institute, Bahadurnagar, Okara were analyzed for various parameters of lifetime traits. For the analysis 2 data sets were made. Data set I included all the cows disposed off from the herd which have completed at least one lactation while for data set II performance traits for only first five lactations were considered. The data was analyzed by Mixed Model Least squares and Maximum Likelihood computer programme PC-I version. The least squares means ${\times}$ standard errors for data set I (periods are in days and milk yield is in litres) were $994.5{\pm}15.5$, $1,877.0{\pm}70.9$, $1,651.9{\pm}19.3$, $2,533.7{\pm}36.5$, $3,530.0{\pm}40.5$, $15,785.2{\pm}320.0$, $8.46{\pm}0.19$, $5.66{\pm}0.16$ and $3.79{\pm}0.08$, respectively for age at first calving (APC), Ist lactation milk yield (FLMY), productive life (PL), herd life (HL), total life (TL), lifetime milk yield (LTMY), milk yield per day of productive life (MY/PL), milk yield per day of herd life (MY/HL) and milk yield per day of total life (MY/TL). For data set II these values were $1,004.2{\pm}21.2$, $2,220.5{\pm}113.1$, $1,429.1{\pm}40.8$, $2,302.1{\pm}73.3$, $3,307.2{\pm}77.3$, $13,189.7{\pm}667.4$, $9.10{\pm}0.34$, $5.66{\pm}0.25$ and $4.02{\pm}0.18$ in the same order. For data set I the effect of year of first calving was significant for AFC, FLMY, PL, HL, LTMY and MY/PL. The season of Ist calving was significant only for MY/PL. The effect of genetic group was significant for AFC, FLMY, MY/PL and MY/TL while the effect of parity was significant for all the traits. For data set II the effect of year of Ist calving was significant only for AFC, FLMY and PL while the season of Ist calving was significant for FLMY and PL while the effect of genetic groups was significant for MY/HL only. The lifetime production performance is in general close to the various estimates reported in the literature.

• Applied Microscopy
• /
• v.38 no.1
• /
• pp.51-61
• /
• 2008

This simulation study examined the effect of data acquisition error including the data type of TEM image, and incident beam intensity of the tilt series on 3D tomograms. Simulation was performed with the 3D head phantom model of Kak and Slaney, and the slightly modified 3D head phantom model with enhanced difference in absorption coefficients. Reconstructed tomogram for the original head phantom model using 8-bit gray-scale image was distorted with extremely high level of noise, while an acceptable result was obtained for the modified model. The results for the original model using wrong formulation for the transmitted beam intensity was proved to be incorrect. The high level of noise along the z direction was found in case of the modified model. On the other hand, the wrong value of incident beam intensity in both models gave distorted results. In order to reconstruct an artifacts-free 3D structure from the projections with invisible features in electron tomography, the 16-bit projection images should be used with the correct incident beam intensity which is applied to Beer's law.

• Korean Journal of Social Welfare
• /
• v.67 no.4
• /
• pp.103-126
• /
• 2015

This study is to explore how the stakeholder views the community needs in a different way in the local district of Korea. The researchers delivered the 3 independent questionnaires to the three types of the community people who are residents, social service providers, governmental officials in charge of local social services. An in-depth analysis was performed to identify the different perspectives of the stakeholder toward the community needs on the basis of the combined approach with the order ranking method and two independent sample T and Z tests. As the result, the three noticeable findings were discovered as follows: First, while the social service providers reported the community needs at the most serious level, the residents expressed the community needs at the least serious level. Second, the stakeholder showed more diverse opinions for the needs of the service activities than the community problem. Third, there was a difference among the stakeholder in the degree of consensus according to the two different analysis methods. The researchers discussed the implication of the major findings in relation to the community needs assessment, and suggested the practical recommendations to improve the activities of the community needs assessment for the community welfare planning in Korea.

• Journal of The Korean Association For Science Education
• /
• v.16 no.3
• /
• pp.314-328
• /
• 1996

This study investigated the literature about science process skills' evaluation to analyse transition of evaluation objectives before and after a Scholastic Ability Test for College Entrance. In the literature survey the researcher established a 3 dimensional science assessment framework with X axis as science concept, Y axis as science process skills and Z axis as problem context. In order to analysis and compare each items the researcher selected 210 items from the 1st to the 7th trials and 138 items from the 1st to 4th Scholastic Ability Test for College Entrance and sampled 2873 science achievement test items from 10 high schools. In accordance with this taxonomy the researcher analysed and compared science process skills item forms. The following results were drawn : The items were evenly distributed in all the four areas(Earth Science, Biology, Physics and Chemistry) of the science concept domain, but they were heavily concentrated on data analysis and drawing a conclusion in science process domain. In the domain of problem context school context was the majority. In spite of distribution like this the ratio on science process skills measurement items and science achievement test items was increased after the Scholastic Ability Test for College Entrance was given. Also the ratio on item expression type was increased. Item form was almost 5 options selection type in the national level test. Although there were 4 options selection type, 5 options selection type, short answer type, essay type in school level test, rising from 33.1% to 65.5% on 5 options selection type is exhibited. This study showed that the school level item form was better various than the nation level. This point like this is the evidence for the improvement toward the science process skills test and influenced by Scholastic Ability Test for College Entrance. The ratio on the item which joined with the 3 axes had a mean of 99.3% in nation level test and mean 44.9% in school achievement test level. But the ratio in the school achievement test level increased after the Scholastic Ability Test for College Entrance was given. In view of this study we must furthermore study the item types which can evaluate valjdately science process skill's five stage each and evaluation method by the high school students' problem solving patterns and features in scientific inquiry on all science process skills elements.

• 대한공업교육학회지
• /
• v.36 no.1
• /
• pp.115-130
• /
• 2011

When the hollow cylinder structure moves in underwater with high speed structural can be propagated from the end of the structure to the front side. This noise can reduce the sensitivity of the conformal array which installed in the surface of the cylinder. To reduce this noise propagation it is suggested to install two self-reduction rings at the surrounding of the cylinder which is 500mm in diameter and 840mm in length. The places of the two noise reduction rings are 120mm and 240mm point from the end of the structure. Two noise reduction rings reduced 10.1 % of maximum stress. When outside noise frequency applied to the structure from the 4kZ to 6kHz, 20dB noise reduction was calculated using 6 order polynomial equation. When outside noise frequency also applied to the structure with 200Hz, 500Hz, 900Hz, maximum sound pressure level point moved to the end of the structure. Most conformal sensors are fabricated at the front side of the structure. Based on the simulation results proposed two rings can be reduced noise propagation from the tail of the structure effectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.2
• /
• pp.246-252
• /
• 2010

In order to improve the availability of phytase and probiotics together, a phytase gene from Aspergillus ficuum has been expressed in Lactobacillus. In this study, the transformed Lactobacillus with phytase gene was fed to pigs to determine its effect on pig production, feed conversion and gut microbes. Forty eight, 60-day-old, castrated pigs (Duroc${\times}$Landrace${\times}$Pietrain) were assigned to 6 groups, 8 pigs for each group. Group 1 was the control, group 2 was added with chlortetracycline (500 mg/kg), group 3 was added with the transformed Lactobacillus (500 mg/kg) with 20% (w/w) of calcium monohydrogen phosphate (CMP, $CaHPO_{4}$) removed, group 4 was added with the natural Lactobacillus (500 mg/kg) with 20% (w/w) of CMP removed, group 5 was added with the transformed Lactobacillus (500 mg/kg) with 40% (w/w) of CMP removed, group 6 was added with phytase (500 mg/kg) with 40% (w/w) of CMP removed. The results showed: i) the average daily gain (ADG) was improved in groups 2, 3 and 4 (p<0.05); ii) the diarrhea rates in the groups added with Lactobacillus were lower than in the other groups (p<0.05), in which the transformed Lactobacillus had more effect on reducing digestive disease; iii) the transformed Lactobacillus was most effective in improving the digestibilities of crude protein (CP), calcium (Ca), phosphorus (P), compared with the other groups (p<0.05); iv) Lactobacillus could increase lactic acid bacterium number and ammonia concentrations, and decrease pH values and E. coli number in pig feces (p<0.05); v) the phytase activity in the feces of pigs fed with the transformed Lactobacillus was 133.32 U/g, which was higher than in group 4 (9.58 U/g, p<0.05), and was almost the same as group 6 (135.94 U/g); vi) the transformed Lactobacillus could increase serum concentrations of IgA, triglyceride, and glutamic oxaloacetic transaminase activity (p<0.05), and had no significant effect on other serum indexes (p>0.05).