• The Korean Journal of Mycology
• /
• v.37 no.2
• /
• pp.161-166
• /
• 2009

The purpose of the present study is to develop a simple, fast and sensitive LC/MS method for simultaneous separation and the determination of an active component in the oriental medicinal mushroom Cordyceps militaris. Based on this work, the contents of cordycepin in Cordyceps militaris fruiting cultivated on various media were determined and compared. And also, the nutritional components such as minerals and vitamins were determined in order to provide useful information to consumer as a food material. The analysis methods of nutritional components were chosen on the basis of AOAC. The optimum separation for cordycepin was achieved using a solvent gradient consisting of the mixture of 0.1% formic acid in methanol (solvent B) in a background of 0.1% formic acid in water (solvent A) as a mobile phase and a 3.0${\times}$150 Waters XTera column. Selective ion monitoring (SIR) mode ([M+H]+ at m/z 252) was used for quantitative analysis of cordycepin. The cultivated Cordyceps militaris on various media contained 1~14 /g of cordycepin, 0.65~1.08% of thiamine, 0.86~7.17% of riboflavin, and 3.01~5.26% of niacin. The content of mineral components varied on categories, especially contained 500~3500% of potassium as a major mineral. Cordycepin, niacin and potassium were found much higher in the fruiting cultivated with soy power media (gold 10) than other media.

• Journal of Ecology and Environment
• /
• v.41 no.10
• /
• pp.281-289
• /
• 2017

Background: In this study, the growth and reproductive response of seedlings, grown in plastic pots with sand, to moisture and nutrients were analyzed in order to study the environmental conditions required to create an alternative habitat for Epilobium hirsutum L., an endangered plant. Results: Vegetative and reproductive growths of Epilobium hirsutum L. are accelerated with increase in moisture and organic matter content in the soil. Among vegetative organs, the number of runners related to asexual reproduction was the highest when the moisture content was over 25% and nutrient content between 7 and 14% in the soil. But the number of flowers related to flowering responses, among reproductive organs, was the highest when the moisture content was maintained at 75% and when nutrient content was 21% in the soil. The number of seeds, related to sexual reproduction, was the highest when the moisture content was over 25% and nutrient content between 14 and 21%. Conclusions: The study results show that a place with high moisture and nutrient content in the soil is advantageous to asexual and sexual reproduction of Epilobium hirsutum L. Therefore, we must serve periodically nutrient and seeds to sustain population in in situ conservation. Furthermore, it is advisable to create in riverside where abundant nutrient content have, making alternative habitat of Epilobium hirsutum L. Also, we must find species that have high contribution degree index through vegetation survey.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4B
• /
• pp.378-385
• /
• 2011

The three-dimensional triangulation algorithm that the beacon nodes can be allocated to dynamically in not the experimental region but the practical region is suggested, and the performance of the localization system adapting the suggested algorithm is analyzed. The suggested algorithm adapts the computation method of the three dimensional point that the surfaces of three spheres overlapped, while the traditional triangulation algorithm adapts the computation method of the two dimensional point that three circles are overlapped in order to compute the distance between beacon nodes and mobile node that means a radius. In addition to this, to analyze the performance of the localization system adapting the suggested algorithm, first of all, the allocation layout of beacon nodes is made, and the allocation layout is modeled by selection of ten random distance values between mobile node and beacon nodes for computer simulation of the practical model. Next, the two dimensional coordinator of mobile node that is calculated by the suggested algorithm and the traditional triangulation algorithm is compared with each other. The localization measuring performance about three dimensional coordinator(z axis) of the suggested algorithm is also obtained by comparing with that of the practical model.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.3
• /
• pp.236-244
• /
• 2014

This study considered a seagrass habitat in order to analyze the characteristics of a marine environment of seagrass located in the Seomjin river estuary, through an analysis of the distribution of the water depth, field observation, and three-dimensional numerical experiments using an EFDC model. The seagrass habitat was usually distributed at D.L(-) 0.5~0.0 m, and was hardly seen in the intertidal zone higher than that range. The distribution of the water temperature was within the range of $7.0{\sim}23.2^{\circ}C$, and the seagrass was demonstrated to have a strong tolerance to changes in the water temperature. In addition, the salinity distribution was found to be 27.2~31.0 psu, with suspended solids of 32.1 mg/L, which were higher than the previous research results (Huh et al., 1998), implying that there may be a reduction in the amount of deposits caused by the suspended solids. As for the sedimentary facies, they were comprised of 62.7% sand, 19.1% silt, and 18.2% clay, indicating that the arenaceous was superior and the sedimentary facies were similar to that of Dadae Bay. According to a numerical experiment, the maximum tidal current was 75 cm/s, while the tidal residual current was 10 cm/s, confirming that it sufficiently adapted to strong tidal currents. The erosion and deposition are predicted to be less than 1.0 cm/year. Thus, it is judged that the resuspension of sediments due to tidal currents and the changes in sedimentary facies are insignificant.

• International Journal of Automotive Technology
• /
• v.6 no.2
• /
• pp.149-159
• /
• 2005

A full nonlinear finite element P185/70Rl4 passenger car radial-ply tire model was developed and run on a 1.7-meter-diameter spinning test drum/cleat model at a constant speed of 50 km/h in order to investigate the tire transient response characteristics, i.e. the tire in-plane free vibration modes transmissibility. The virtual tire/drum finite element model was constructed and tested using the nonlinear finite element analysis software, PAM-SHOCK, a nonlinear finite element analysis code. The tire model was constructed in extreme detail with three-dimensional solid, layered membrane, and beam finite elements, incorporating over 18,000 nodes and 24 different types of materials. The reaction forces of the tire axle in vertical (Z axis) and longitudinal (X axis) directions were recorded when the tire rolled over a cleat on the drum, and then the FFT algorithm was applied to examine the transient response information in the frequency domain. The result showed that this PI 85/70Rl4 tire has clear peaks of 84 and 45 Hz transmissibility in the vertical and longitudinal directions. This result was validated against more than 10 previous studies by either theoretical or experimental approaches and showed excellent agreement. The tire's post-impact response was also investigated to verify the numerical convergence and computational stability of this FEA tire model and simulation strategy, the extraordinarily stable scenario was confirmed. The tire in-plane free vibration modes transmissibility was successfully detected. This approach was never before attempted in investigations of tire in-plane free vibration modes transmission phenomena; this work is believed to be the first of its kind.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.8
• /
• pp.1466-1477
• /
• 2016

This paper analyzes the electrical characteristic such as the impedance(Z), inductance(L), and cable resistance($R_p$) according to the change of cable length in order to move the electrical sorting device for distinguishing between AF non-insulated track circuits from the center of railway to outside railway. The simulation is performed to check the voltage difference between the voltage of sender and the voltage of receiver and determine the possibility of the voltage restoration availability in the frequency filter band through the capacitor compensation. It was applied to the results of the simulation to the sorting devices installed in the actual field. It is proved the availability by checking the measured voltage characteristic according to the capacitor compensating change of $10{\mu}F$ and $16{\mu}F$ before, and after the length of cable is increased with 6 meters. Through this, the prevention of breakdown and damage to facilities and the prevention the safety-related accidents of line workers from the train are expected according to moving the sorting devices of AR non-insulated track circuits to outside railway.

• MALSORI
• /
• no.4
• /
• pp.20-30
• /
• 1982

The aim of this paper is to analyse difficulties of the pronunciation in swedish vowels encountered by Koreans learners and to seek solutions in order to correct the possible errors. In the course of the analysis the swedish and Korean vowels in question are compared with the purpose of describing differences aha similarities between these two systems. This contrastive description is largely based on the students' articulatory speech level ana the writer's auditory , judgement . The following points are discussed : 1 ) Vowel length as a distinctive feature in Swedish compared with that of Korean. 2) A special attention is paid on the Swedish vowel [w:] that is characterized by its peculiar type of lip rounding. 3) The six pairs of Swedish vowels that are phonologically contrastive but difficult for Koreans to distinguish one from the other: [y:] ~ [w:], [i:] ~ [y:], [e:] ~ [${\phi}$:], [w;] ~ [u:] [w:] ~ [$\theta$], [$\theta$] ~ [u] 4) The r-colored vowel in the case of the postvocalic /r/ that is very common in American English is not allowed in English sound sequences. The r-colored vowel in the American English pattern has to be broken up and replaced hi-segmental vowel-consonant sequences . Korean accustomed to the American pronunciation are warned in this respect. For a more distinct articulation of the postvocalic /r/ trill [r] is preferred to fricative [z]. 5) The front vowels [e, $\varepsilon, {\;}{\phi}$) become opener variants (${\ae}, {\;}:{\ae}$] before / r / or supradentals. The results of the analysis show that difficulties of the pronunciation of the target language (Swedish) are mostly due to the interference from the Learner's source language (Korean). However, the Learner sometimes tends to get interference also from the other foreign language with which he or she is already familiar when he or she finds in that language more similarity to the target language than in his or her own mother tongue. Hence this foreign language (American English) in this case functions as a second language for Koreans in Learning Swedish.

• Journal of Korean Society on Water Environment
• /
• v.32 no.2
• /
• pp.205-215
• /
• 2016

In order to improve water quality in the Paldang Lake, a riparian vegetation belt, treatment wetland, and artificial floating island were designed for introduction in the upland field, the estuary of tributaries, and the section of water facing mountainous land, respectively. We synthesized vegetation information collected from a reference river and found that herbaceous, shrubby, and tree vegetation zones tended to be dominated by Phragmites japonica, Phalaris arundinacea, etc.; Salix gracilistyla, S. integra, etc.; and S. koreensis, S. subfragilis, and Morus alba, respectively. In our plan, the herbaceous vegetation zone, which is established on floodplains with a high frequency of disturbance, will be left in its natural state. A shrubby vegetation zone will be created by imitating the species composition of the reference river in the ecotone between floodplain and embankment. A tree vegetation zone will be created by imitating species composition on the embankment slope. In the treatment wetland, we plan to create emerged and softwood plant zones by imitating the species composition of the Zizania latifolia community, the Typha orientalis community, the P. communis community, the S. integra community, and the S. koreensis community. The floating island will be created by restoring Z. latifolia and T. orientalis for water purification purposes.

• Journal of Internet Computing and Services
• /
• v.5 no.6
• /
• pp.79-91
• /
• 2004

Various facial pose detection and recognition has been a difficult problem. The problem is due to the fact that the distribution of various poses in a feature space is mere dispersed and more complicated than that of frontal faces, This thesis proposes a robust pose-expression-invariant face recognition method in order to overcome insufficiency of the existing face recognition system. First, we apply the TSL color model for detecting facial region and estimate the direction of face using facial features. The estimated pose vector is decomposed into X-V-Z axes, Second, the input face is mapped by deformable template using this vectors and 3D CANDIDE face model. Final. the mapped face is transformed to frontal face which appropriates for face recognition by the estimated pose vector. Through the experiments, we come to validate the application of face detection model and the method for estimating facial poses, Moreover, the tests show that recognition rate is greatly boosted through the normalization of the poses and expressions.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.3
• /
• pp.167-174
• /
• 2017

Antarctica, where ice sheet has been declined rapidly, should be monitored periodically. However, there are difficult to access for local survey or aircraft observation due to the vast and extreme environments of the polar regions. In order to overcome this problem, there have been a lot of studies by acquiring radar or laser data by satellite. It is also difficult to accurately measure the changes of the surface where is composed of snow or ice layer, and it is also difficult to product a high-resolution DEM. This study therefore aims to product DEMs of two periods using high-resolution KOMPSAT-3A stereo images, and DEM matching is implemented by the LZD(Least-squares Z-Differences) method to detect DEM changes in both periods. As a result, the proposed method could be suggested as comparing height differences of the two DEMs within 1m precision.