• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.106-112
• /
• 2015

In this paper, we propose an on-line signature recognition algorithm using fingertip point in the air from the depth image acquired by Kinect. We use ten statistical features for each X, Y, Z axis to react to changes in Shifting and Scaling of the signature trajectories in three-dimensional space. Artificial Neural Network is a machine learning algorithm used as a tool to solve the complex classification problem in pattern recognition. We implement the proposed algorithm to actual on-line signature recognition system. In experiment, we verify the proposed method is successful to classify 4 different on-line signatures.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.2
• /
• pp.173-178
• /
• 2019

Recently, the types and amount of data generated, collected, and measured in IoT such as smart home, security, and factory are increasing. The technologies for IoT service include sensor devices to measure desired data, embedded software to control the devices such as signal processing, wireless network protocol to transmit and receive the measured data, and big data and AI-based analysis. In this paper, we focused on developing a gateway for interfacing heterogeneous sensor network protocols that are used in various IoT devices and propose a heterogeneous network interface IoT gateway. We utilized a OpenWrt-based wireless routers and used 6LoWAN stack for IP-based communication via BLE and IEEE 802.15.4 adapters. We developed a software to convert Z-Wave and LoRa packets into IP packet using our Python-based middleware. We expect the IoT gateway to be used as an effective device for collecting IoT big data.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.492-495
• /
• 2003

Fuzzy Min-Max Neural Network(FMMNN) is a powerful classifier, It has, however, some problems. Learning result depends on the presentation order of input data and the training parameter that limits the size of hyperbox. The latter problem affects the result seriously. In this paper, the new approach to alleviate that without loss of on-line learning ability is proposed. The committee machine is used to achieve the multi-resolution FMMNN. Each expert is a FMMNN with fixed training parameter. The advantages of small and large training parameters are used at the same time. The parameters are selected by performance and independence measures. The Decision of each expert is guided by the gating network. Therefore the regional and parametric divide and conquer scheme are used. Simulation shows that the proposed method has better classification performance.

• Smart Structures and Systems
• /
• v.15 no.4
• /
• pp.1103-1120
• /
• 2015

A self-sensing magnetorheological (MR) damper with embedded piezoelectric force sensor has recently been devised to facilitate real-time close-looped control of structural vibration in a simple and reliable manner. The development and characterization of the self-sensing MR damper are presented based on experimental work, which demonstrates its reliable force sensing and controllable damping capabilities. With the use of experimental data acquired under harmonic loading, a nonparametric dynamic model is formulated to portray the nonlinear behaviors of the self-sensing MR damper based on NARX modeling and neural network techniques. The Bayesian regularization is adopted in the network training procedure to eschew overfitting problem and enhance generalization. Verification results indicate that the developed NARX network model accurately describes the forward dynamics of the self-sensing MR damper and has superior prediction performance and generalization capability over a Bouc-Wen parametric model.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.219-220
• /
• 2009

Many surveillance cameras used in security system are controlled with RS-485 communication protocol. In this situation, if RS-485 connection can be replaced with wireless connection using sensor network technology, an installation will become ease because of no wired connection and also a deployment of cameras will become free. This paper explains about the design of wireless sensor node and the necessary implementation for an operation, which can be replacing RS-485 connection for the development of CCTV control system based on wireless sensor network. The hardware platform of sensor node was designed based on MicaZ and the software was developed based on TinyOS. To control surveillance cameras deployed on wide area, the supporting of multi-hop also was implemented. With the result of experiment deploying on real environment, it was revealed that the controller could control cameras quickly with wireless.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.493-496
• /
• 2000

We study the problem of designing at minimum cost a two-connected network topology such that the shortest cycle to which each edge belongs does not exceed a given maximum number of hops. This problem is considered as part of network planning and arises in the design of backbone networks. We propose a genetic algorithm approach that uses a solution representation, in which the connectivity and ring constraints can be easily encoded. We also propose a crossover operator that ensures a generated solution is feasible. By doing so, the checking of constraints is avoided and no repair mechanism is required. We carry out experimental evaluations to investigate the solution representation issues and GA operators for the network design problem.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.3
• /
• pp.201-210
• /
• 2014

In this paper, dc-link voltage control of a grid-connected QZSI is presented. Since the input current of the ZSI is discontinuous, a capacity with relatively large capacitance should be connected to the output of the PV array in order to reduce the current ripple. Due to the presence of the impedance network inductor in series with the PV array, the QZSI can achieve continuous input current flow. Several dc-link voltage control methods are compared and the method for power quality improvement is also presented. The performance of the proposed method is verified through both simulation and experimental results.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.5
• /
• pp.1246-1256
• /
• 1998

MIB(Management Information Base), one of the key components of network management system, is a conceptual repository for the information of the various managed objects. MIB stores and manages all the structural and operational data of each managed resources. Therefore, MIB should be protected properly from inadvertant user access or malicious attacks. International standard ISO/IEC 10164-9 describes several managed object classes for the enforcement of MIB security. Those managed object classes described access control rules for security policy. But the exact authorization procedures using those newly added managed object classes are not presented. In this paper, we divide managed object classes into two groups, explicit and implicit ones, and describe the access authorization procedure in Z specification language. Using Z as a description method for both authorization procedure and GDMO's action part, the behaviour of each managed object class and access authorization procedure is more precisely and formally defined than those of natural language form.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.34 no.6
• /
• pp.230-237
• /
• 1985

Shortest path calculations for a large-scale network have to be performed using a decomposition techniqre, since the calculations require large memory size which increases by the square of the number of vertices in the network. Also, the calculation time increases by the cube of the number of vertices in the network. In the decomposition technique,the network is broken into a number of smaller size subnetworks for each of which shortest paths are computed. A union of the solutions provides the solution of the original network. In all of the decomposition algirithms developed up to now, boundary vertices which divide all the subnetworks have to be included in computing shortest paths for each subnetwork. In this paper, an improved algorithm is developed to reduce the number of boundary vertices to be engaged. In the algorithm, only those boundary vertices that are directly connected to the subnetwork are engaged. The algorithm is suitable for an application to real time computation using a parallel processor system which consists of a number of micro-computers or prcessors. The algorithm has been applied to a 39- vertex network and a 232-vertex network. The results show that it is efficient and has better performance than any other algorithms. A parallel processor system has been built employing an MZ-80 micro-computer and two Z-80 microprocessor kits. The former is used as a master processor and the latter as slave processors. The algorithm is embedded into the system and proven effective for real-time shortest path computations.

• Journal of Korean Public Health Nursing
• /
• v.27 no.1
• /
• pp.102-112
• /
• 2013

Purpose: The purpose of this study was to determine the effects of a weight loss program administered through a smart phone application on body composition and obesity in adolescents. Methods: This study applied a 6-week weight loss program with dietary education, exercise therapy, and behavior modification therapy from 4 June 2012 to 20 July 2012. The collected data were analyzed by descriptive statistics and the Wilcoxon signed rank test using the SPSS WIN 18.0 program. Results: After the 6-week program, the average weight of the subjects was reduced from 75.96kg to 74.41kg (Z=$-3.994^p$, p<.001), while the body mass index (BMI) decreased from 29.23 to 28.60 (Z=$-3.980^p$, p<.001), and the obesity index decreased from 38.45% to 35.59% (Z=$-3.977^p$, p<.001). The percentage of body fat decreased from 32.45 to 31.92 (Z=$-3.947^p$, p<.001), and the rate of skeletal muscle growth increased from 26.06% to 26.58% (Z=$-3.822^p$, p<.001). Conclusion: A weight loss program using a SNS (social network service) application, with dietary education, exercise therapy, and behavior modification therapy can reduce obesity and impact body composition in a short-term. Therefore, the utilization of the SNS application can be used to effectively enhance the management of adolescent obesity.