• Structural Engineering and Mechanics
• /
• v.66 no.5
• /
• pp.665-676
• /
• 2018

In this study, a four-node quadrilateral partial mixed plate element with low degrees of freedom (dofs) is developed for static and free vibration analysis of functionally graded material (FGM) plates rested on Winkler-Pasternak elastic foundations. The formulation of the presented finite element model is based on a parametrized mixed variational principle which is developed recently by the first author. The presented finite element model considers the effects of shear deformations and normal flexibility of the FGM plates without using any shear correction factor. It also fulfills the boundary conditions of the transverse shear and normal stresses on the top and bottom surfaces of the plate. Beside these capabilities, the number of unknown field variables of the plate is only six. The presented partial mixed finite element model has been validated through comparison with the results of the three-dimensional (3D) theory of elasticity and the results obtained from the classical and high-order plate theories available in the open literature.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.35 no.4
• /
• pp.243-247
• /
• 2013

Oblique facial cleft is a rare congenital deformity. Its incidence has been reported as 0.24% of all reported cases of facial cleft. We report on a patient who had a left-sided oblique facial cleft with anopthamia, including lip and palate, nose alar base, and medial canthus. The patient also had a right-sided oblique facial cleft, which included lip and palate, nose alar base, medial canthus, and upper eye brow. Primary closure of the facial cleft was performed using multiple Z-plasty after excision of scar tissue.

• Archives of Reconstructive Microsurgery
• /
• v.22 no.2
• /
• pp.90-93
• /
• 2013

Old post burn contractures on feet still remain challenging problem for reconstructive surgeon. A 43-year-old male visited Hallym University Sacred Heart Hospital with the complain of foot deformity and difficulties in shoe fitting. His right 4th and 5th toes were inverted at dorsal foot. We released the contracture of 4, 5th metatarsophalangeal joint and lengthened extensor tendon by Z-plasty, and covered the resultant defect with the anterolateral thigh flap. The flap was successful and the deformity was corrected. As there have been few reports on reconstruction of foot dorsum, especially on post burn extension contractures in the toes, we report a rare case of contracture release and coverage by free flap.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.3
• /
• pp.373-379
• /
• 2020

Carotid endarterectomy (CEA) is the main procedure in carotid surgery, as well as the most frequent vascular procedure. Two techniques of CEA are available : eversion and conventional plus patch angioplasty. Eversion CEA is anatomic procedure that reduces ischemic and total operative time. Simultaneous correction of the joined carotid kinking and coiling is possible, easy and safe, while the usage of patch is excluded. Thanks to oblique shape of anastomosis, eversion CEA is associated with low risk of long-term restenosis. The false anastomotic aneurysms occurrence is very rare, almost impossible after eversion CEA. However, the usage of carotid shunt during eversion CEA is not always simple, while proximal or distal extension of the carotid plaque can make eversion CEA more difficult and risky. Eversion CEA should be the first choice in carotid surgery. Conventional CEA is indicated in cases when carotid plaque is extended more than usual, as well as, if the usage of carotid shunt is necessary.

• Journal of Animal Science and Technology
• /
• v.60 no.2
• /
• pp.4.1-4.1
• /
• 2018

• Proceedings of the KOSOMBE Conference
• /
• v.1990 no.11
• /
• pp.19-23
• /
• 1990

A new technique for reducing the susceptibility artifact in gradient echo imaging which uses a tailored RF pulse is proposed. It is applied to the case of imaging where artifacts and distortions arise due to the high local magnetic field inhomogeneity i. e., the susceptibility. The signal loss and void phenomena due to susceptibility in a voxel are studied and a correction method using a tailored RF pulse is proposed. Applications of this method in imaging are given and experimental results obtained using an human volunteer with a 2.0 T KAIS NMR system are presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.7
• /
• pp.651-662
• /
• 1991

An improved modular multiplication algorithm for RSA type public key cryptosystem and its application to a serial communication cricuit are presented. Correction on a published fast modular multiplication algorithm is proposed and verified thru simulation. Cryptosystem for RS 232C communication protocol isdesigned and prototyped for low speed data exchange between computers. The system adops the correct algoroithm and operates successfully using a small size key.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.531-534
• /
• 1997

A design system of dies for hot extrusion of structural shapes such as Z' s, L' s, T' s, U' s and H' s from aluminum alloys was developed in this study. The developed design system of dies is based of established die design rule system. The design rules for die design are obtained from the handbooks, plasticity theories and relevant references. The environment of the system is AutoCAD and AutoLISP, the graphic programming language was used for the configuration of the system. This system includes five major modules such as section shape design module, die opening number module. die opening layout module, die correction module and die bearing design module that are used to determine design variables. This system would be used to design of dies for hot extrusion from aluminum alloys and widely used in manufacturing course..

• Advances in materials Research
• /
• v.4 no.1
• /
• pp.31-44
• /
• 2015

This paper presents a simple n-order four variable refined theory for buckling analysis of functionally graded plates. By dividing the transverse displacement into bending and shear parts, the number of unknowns and governing equations of the present theory is reduced, and hence, makes it simple to use. The present theory is variationally consistent, uses the n-order polynomial term to represent the displacement field, does not require shear correction factor, and eliminates the shear stresses at the top and bottom surfaces. A power law distribution is used to describe the variation of volume fraction of material compositions. Equilibrium and stability equations are derived based on the present n-order refined theory. The non-linear governing equations are solved for plates subjected to simply supported boundary conditions. The thermal loads are assumed to be uniform, linear and non-linear distribution through-the-thickness. The effects of aspect and thickness ratios, gradient index, on the critical buckling are all discussed.

• Coupled systems mechanics
• /
• v.4 no.1
• /
• pp.99-114
• /
• 2015

In this paper, a refined exponential shear deformation beam theory is developed for bending analysis of functionally graded beams. The theory account for parabolic variation of transverse shear strain through the depth of the beam and satisfies the zero traction boundary conditions on the surfaces of the beam without using shear correction factors. Contrary to the others refined theories elaborated, where the stretching effect is neglected, in the current investigation this so-called "stretching effect" is taken into consideration. The material properties of the functionally graded beam are assumed to vary according to power law distribution of the volume fraction of the constituents. Based on the present shear deformation beam theory, the equations of motion are derived from Hamilton's principle. Analytical solutions for static are obtained. Numerical examples are presented to verify the accuracy of the present theory.