• Atmosphere
• /
• v.25 no.2
• /
• pp.339-351
• /
• 2015

The purpose of this study is for the fundamental understandings about building morphological parameters and aerodynamic roughness parameters of Seoul, Korea using the detailed urban geographic information datasets. Applied roughness parameter calculations are based on a digital map of buildings with lot area polygons. The quality of the developed roughness length ($z_0$) of Seoul was evaluated with densely installed 107 automatic weather stations. The correlation coefficient results between averaged wind speeds of AWS data and averaged $z_0$ is -0.303 in night and -0.398 in day (200 m radii circles case). Further $z_0$ enhancement should follow by considering other surface features such as high tree and orography of Seoul. However, this study would meet the needs to for local- or meso-scale meteorological modeling applications of Seoul. However, further studies would require for enhancing the $z_0$ applications of Seoul.

• Journal of Korea Water Resources Association
• /
• v.47 no.12
• /
• pp.1227-1237
• /
• 2014

Dual-polarization can distinguish precipitation type and dual-polarization is provide not only meteorological phenomena in the atmosphere but also non-precipitation echoes. Therefore dual-polarization radar can improve radar estimates of rainfall. However polarimetric measurements by transmitting vertically vibration waves and horizontally vibrating waves simultaneously is contain systematic bias of the radar itself. Thus the calibration bias is necessary to improve quantitative precipitation estimation. In this study, the calibration bias of reflectivity (Z) and differential reflectivity ($Z_{DR}$) from the Bislsan dual-polarization radar is calculated using the 2-Dimensional Video Disdrometer (2DVD) data. And an improvement in rainfall estimation is investigated by applying derived calibration bias. A total of 33 rainfall cases occurring in Daegu from 2011 to 2012 were selected. As a results, the calibration bias of Z is about -0.3 to 5.5 dB, and $Z_{DR}$ is about -0.1 dB to 0.6 dB. In most cases, the Bislsan radar generally observes Z and $Z_{DR}$ variables lower than the simulated variables. Before and after calibration bias, compared estimated rainfall from the dual-polarization radar with AWS rain gauge in Daegu found that the mean bias has fallen by 1.69 to 1.54 mm/hr, and the RMSE has decreased by 2.54 to 1.73 mm/hr. And estimated rainfall comparing to the surface rain gauge as ground truth, rainfall estimation is improved about 7-61%.

• Journal of Korea Water Resources Association
• /
• v.35 no.1
• /
• pp.25-36
• /
• 2002

Window Probability Matching Method(WPMM) is achieved by matching identical probability density of rain intensities and radar reflectivities taken only from small window centered about the gage. The equation of $Z_{e}-R$ relationship is obtained and compared with data between a DWSR-88C radar and high density rain gage networks within 150km from radar site in summer season, 1998. The probability density of radar effective reflectivity is distributed with high frequency near 15dBZ. The frequency distribution of rain intensities shows that rain intensity is lower than 10mm/hr in most part of radar coverage area. As the result of $Z_{e}-R$ relationship using WPMM, curved line has shown to the log scale spatially and it can be explained more flexible than any straight-line power laws at the transformation to the rainfall amount from $Z_e$ value. During 3 months, total radar cumulative rainfall amount estimated by $Z=200R^{1.6}$ and WPMM relationships are 44 and 80 percentages of total raingage amount, respectively. Therefore, $Z_{e}-R$ relationships by WPMM may be widely needed a statistical method for the computation of accumulated precipitation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.1783-1788
• /
• 2009

We newly propose that we may reuse scrap powders ($Z_rO_2$+8 mol%-$Y_2O_3$) as $Y_2O_3$-stabilized zirconia (YSZ) sintered products through sintering process at 1550$^{circ}C$ for 2hrs. We also prepared the reference specimen from fresh $Z_rO_2$+30 mol%-$Y_2O_3$ powder mixture (celluar type with 1㎛-length). The reference sample showed a dense microstructure with grains of $\sim$10㎛ in diameter, while the sintered sample from scrap powder showed irregular grains of 1$\sim$30 ㎛ in diameter. Through XRD analysis, we confirmed that the reference sample has mixed phases of $Y_2O_3$(cubic), $Z_{r0.8}O_{1.9}$(cubic), and $Z_rO_2$(monoclinic), while the sintered YSZ sample from scrap powder has only tetragonal phase. Moreover, the sintered YSZ from scrap powder showed vickers hardness and apparent density more than 70 and 4.11 g/cc, which implies that it can be suitable for structural material application.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.225-231
• /
• 2019

Purpose: This study was undertaken to compare fracture and flexural strength of provisional restorative resins fabricated by additive manufacturing, subtractive manufacturing, and conventional direct technique. Materials and methods: Five types of provisional restorative resin made with different methods were investigated: Stereolithography apparatus (SLA) 3D printer (S3Z), two digital light processing (DLP) 3D printer (D3Z, D3P), milling method (MIL), conventional method (CON). For fracture strength test, premolar shaped specimens were prepared by each method and stored in distilled water at $37^{\circ}C$ for 24 hours. Compressive load was measured using a universal testing machine (UTM). For flexural strength test, rectangular bar specimens ($25{\times}2{\times}2mm$) were prepared by each method according to ISO 10477 and flexural strength was measured by UTM. Results: Fracture strengths of the S3Z, D3Z, and D3P groups fabricated by additive manufacturing were not significantly different from those of MIL and CON groups (P>.05/10=.005). On the other hand, the flexural strengths of S3Z, D3P, and MIL groups were significantly higher than that of CON group (P<.05), but the flexural strength of D3Z group was significantly lower than that of CON group (P<.05). Conclusion: Within the limitation of our study, provisional restorative resins made from additive manufacturing showed clinically comparable fracture and flexural strength as those made by subtractive manufacturing and conventional method.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.1
• /
• pp.18-25
• /
• 2022

Purpose: This study aimed to evaluate the color stability and antibacterial properties of the surface of polyethyl methacrylate (PEMA) resin with zirconia nanoparticles added. Materials and Methods: The control group was pure PEMA resin, and the experiment group was PEMA resin 15 mm in diameter and 2.5 mm in thickness disk-shaped specimens with 2, 4 and 8 w/v% of zirconia nanoparticles added, which were respectively divided into Group Z2, Group Z4, and Group Z8. After analyzing the surface roughness and color stability of the specimens, their antibacterial properties were evaluated using Porphyromonas gingivalis (P. gingivalis). The Statistical analysis was performed using when normality was met in the Shapiro-Wilk test, one-way ANOVA was used to test parameters, and Tukey's test was used as a post hoc test. When normality was not met, the Kruskal-Wallis test, a non-parametric test was used (P < 0.05). Results: The surface roughness measurement found that there was no significant difference between the experimental and control groups. The color stability evaluation showed that the Z2, Z4, and Z8 groups were within the color range of natural teeth. The adhesion of P. gingivalis was evaluated to be significantly reduced in Group Z2 compared to the control group (P < 0.05). In the Z2 group, Z4 group, and Z8 group, dead cells bacteria than the control group were observed. Conclusion: In conclusion, PEMA resin with zirconia nanoparticles added was within the range of natural teeth in color and reduced the adhesion of P. gingivalis.

• Journal of the Korean housing association
• /
• v.6 no.2
• /
• pp.87-90
• /
• 1995

이 연구의 목적은 복사공간에서 한국 성인을 위한 기하학적 표면 데이터 파일을 만드는데 있다. 특히, 이 논문에서는 한국 성인의 기하학적 표면 데이터 파일을 만들기 위해, 컴퓨터화된 인간 마네킨과 프로그램을 사용한다. 이 데이터 파일은 3012개 삼각형의 x, y, 그리고 z 좌표로 구성되어 있다. 이 기하학적 표면 데이터는 한국 성인의 표면력, 투사면적, 그리고 형태 계수를 구하는데 중요한 자료이다.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.11
• /
• pp.649-655
• /
• 2015

As a novel water treatment membrane, concept of ceramic-based graphene membrane (CbGM) was suggested, and its mass transport behavior was investigated. The selectivity of CbGM was given by graphene material which is consisting of active layer, only transmitting water, but rejecting salts. Filtration-assisted assembly methods was employed as a facile method to fabricate CbGM. Surface morphology and characteristics of CbGM were analyzed by scanning electron microscopy (SEM) and contact angle. In addition, three different kinds of solutes (i.e., NaCl, $MgCl_2$, $Na_2SO_4$) were tested in batch forward osmosis system to confirm the mass transport behavior. Through surface morphology analysis and mass transport behavior, it was revealed that interlocking between graphene layers is very important, rather than thickness of laminated graphene layers, in terms of selectivity to CbGM. All the anions in each solute showed faster transport than those of cations. In addition, solutes which have high ion valence charge ratio of anion to cation ($Z^-/Z^+$) was easier to be passed through CbGM. It indirectly implied that the surface charge of CbGM appear to be positive. In addition, It showed that surface charge of CbGM has a great role on mass transport, in particular, transport of matter having charges, generally ions.

• Weed & Turfgrass Science
• /
• v.2 no.3
• /
• pp.267-273
• /
• 2013

In this study, 241 zoysiagrasses (Zoysia spp.) accessions naturally growing in South Korea were collected in order to investigate the seed morphological traits. One of the goals of this study was to identify the morphological characteristics and variations of zoysiagrass seed. For the 241 zoysiagrasses accessions collected, a total of 41% (99 accessions) was interspecific hybrid zoysia, which showed various types of seed variations different from zoysiagrass species. Most of these hybrids zoysiagrasses were classified into Z. sinica type and Z. japonica type. Group I and II included Z. sinica type, this group showed 30.1 and 17.5 in number of seed per spike and 4.6 and 5.2 mm in seed length. Group III and IV included Z. japonica type, this group showed 59.2 and 45.8 in number of seed per spike and 3.3 and 3.4 mm in seed length. There is a need for additional research on growth characteristics and the molecular level for the interspecific hybridization which confirmed that genetic variation from level of gene flow between the species.

• Journal of the Korean Data and Information Science Society
• /
• v.22 no.2
• /
• pp.189-196
• /
• 2011

In this study, we perform a simulation study to compare frequently used standardization methods for interview scores based on trimmed mean, rank mean, and z-score mean. In this simulation study we assume that interviewer's score is influenced by a weighted average of true interviewee's true score and independent noise whose weight is determined by the professionality of the interviewer. In other words, as interviewer's professionality increases, the observed score becomes closer to the true score and if interviewer's professionality decreases, the observed score becomes closer to the noise instead of the true score. By adding interviewer's tendency bias to the weighed average, final interviewee's score is assumed to be observed. In this simulation, the interviewers's cores for each method are computed and then the method is considered best whose rank correlation between the method's scores and the true scores is highest. Simulation results show that when the true score is from normal distributions, z-score mean is best in general and when the true score is from Laplace distributions, z-score mean is better than rank mean in full interview system, where all interviewers meet all interviewees, and rank mean is better than z-score mean in half split interview system, where the interviewers meet only half of the interviewees. Trimmed mean is worst in general.