• Journal of the Korean earth science society
• /
• v.45 no.2
• /
• pp.136-146
• /
• 2024

This paper introduces the seismic facies classification and mapping of igneous bodies found in the sedimentary sequences of the Yellow Sea shelf area of Korea. In the research area, six extrusive and three intrusive types of igneous bodies were found in the Late Cretaceous, Eocene, Early Miocene, and Quaternary sedimentary sequences of the northeastern, southwestern and southeastern sags of the Gunsan Basin. Extrusive igneous bodies include the following six facies: (1) monogenetic volcano (E.mono) showing cone-shape external geometry with height less than 200 m, which may have originated from a single monogenetic eruption; (2) complex volcano (E.comp) marked by clustered monogenetic cones with height less than 500 m; (3) stratovolcano (E.strato) referring to internally stratified lofty volcanic edifices with height greater than 1 km and diameter more than 15 km; (4) fissure volcanics (E.fissure) marked by high-amplitude and discontinuous reflectors in association with normal faults that cut the acoustic basement; (5) maar-diatreme (E.maar) referring to gentle-sloped low-profile volcanic edifices with less than 2 km-wide vent-shape zones inside; and (6) hydrothermal vents (E.vent) marked by upright pipe-shape or funnel-shape structures disturbing sedimentary sequence with diameter less than 2 km. Intrusive igneous bodies include the following three facies: (1) dike and sill (I.dike/sill) showing variable horizontal, step-wise, or saucer-shaped intrusive geometries; (2) stock (I.stock) marked by pillar- or horn-shaped bodies with a kilometer-wide intrusion diameter; and (3) batholith and laccoliths (I.batho/lac) which refer to gigantic intrusive bodies that broadly deformed the overlying sedimentary sequence.

• Journal of Food Hygiene and Safety
• /
• v.39 no.2
• /
• pp.61-71
• /
• 2024

In this study, we analyzed chlorogenic acid indicator components in preparation for the additional listing of green coffee bean extract in the Health Functional Food Code and optimized caffeine for simultaneous analysis. We extracted chlorogenic acid and caffeine using 30% methanol, phosphoric acid solution, and acetonitrile-containing phosphoric acid and analyzed them at 330 and 280 nm, respectively, using liquid chromatography. Our analysis validation results yielded a correlation coefficient (R²) revealing a significance level of at least 0.999 within the linear quantitative range. The chlorogenic acid and caffeine detection and quantification limits were 0.5 and 0.2 ㎍/mL and 1.4, and 0.4 ㎍/mL, respectively. We confirmed that the precision and accuracy results were suitable using the AOAC validation guidelines. Finally, we developed a simultaneous chlorogenic acid and caffeine analysis approach. In addition, we confirmed that our analysis approach could simultaneously quantify chlorogenic acid and caffeine by examining the applicability of each formulation through prototypes and distribution products. In conclusion, the results of this study demonstrated that the standardized analysis would expectably increase chlorogenic acidcontaining health functional food quality control reliability.

• Journal of Food Hygiene and Safety
• /
• v.39 no.2
• /
• pp.95-101
• /
• 2024

In this study, we investigated the migration level of items specified in the Korean Standards and Specifications for Utensils, Containers, and Packages (Ministry of Food and Drug Safety Notification) for 50 utensils and hygiene products made of biodegradable resins. Our results revealed that one Polylactide (PLA) baby tableware contained 20 mg/L in consumption of potassium permanganate, exceeding the standard of 10 mg/L or less. In all other samples, formaldehyde, lead (Pb), and arsenic (As) levels could be considered very safe and remained below the standard. Moreover, we tested the PLA baby tablewares (n = 21) for migration into a food simulant (4% v/v acetic acid) upon repeated elution at 100℃ for 30 min or UV irradiation for 2 h. We detected increased formaldehyde and As amounts at the repeated 100℃ treatment for 30 min compared to those upon repeated UV irradiation. However, the migration level was markedly low under both conditions. Furthermore, the Estimated Daily Intake (EDI) calculated on an infant-to-child basis from the formaldehyde and As migration at 100℃ for 30 min in the PLA sample was at the maximum value, i.e., 6.0×10^-4 mg/kg b.w./day and 1.3×10^-1 ㎍/kg b.w./day, corresponding to 0.40% and 10.42% of the Tolerable Daily Intake (TDI, 0.15 mg/kg b.w./day) and Provisional Tolerable Weekly Intake (PTWI, 9.0 ㎍/kg b.w./week), respectively. Therefore, in this study, we confirmed that biodegradable synthetic resins are safe to use for food.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.19 no.2
• /
• pp.81-96
• /
• 2024

This study analyzed the differences in the effects on entrepreneurship and entrepreneurial willingness of college students under the coronavirus pandemic by dividing theoretical education into practical education, face-to-face education, and non-face-to-face education, and analyzed the differences in the effects on entrepreneurship and entrepreneurship willingness according to the education method. This study conducted entrepreneurship education for 552 students at a comprehensive university in Chungcheong-do, Korea, and analyzed the sample by dividing it into theoretical and practical education, face-to-face education, and non-face-to-face education. In addition, a two-way repeated measures ANOVA was conducted to determine whether there were differences in the entrepreneurship education course operation form according to the pre- and post-education time points. The results showed that, first, the difference between the effectiveness of entrepreneurship education before and after theoretical and practical education was significant, and the entrepreneurship of practical education was higher than that of theoretical education after education. In the test of pre- and post-training differences in entrepreneurial intention, the difference in effectiveness was significant only in practical training. Second, the results of the repeated measures ANOVA analysis of the course operation type of theoretical and practical courses according to the difference between the pre- and post-education time points showed that there were differences in the entrepreneurship effectiveness of theoretical and practical courses according to the time point of education. Third, the difference in the effectiveness of entrepreneurship education according to face-to-face and non-face-to-face education was significant, and only the effect of non-face-to-face education on entrepreneurial intention was significant before and after education. Fourth, the results of repeated measures ANOVA analysis of face-to-face and non-face-to-face course operation type showed that the effect of face-to-face and non-face-to-face entrepreneurship education differed depending on the time of education. The pre-post difference in entrepreneurial intention was significant only for the non-face-to-face program. The implication of this study is that in order to increase the effectiveness of entrepreneurship and entrepreneurial will among university students, it is necessary to expand the amount of practical classes in which students actively participate in activities related to entrepreneurship. In addition, in order to increase the effectiveness of entrepreneurial will, a non-face-to-face education method that utilizes the metaverse space and increases the role of each student can contribute to increasing the effectiveness of entrepreneurial will.

• Journal of Food Hygiene and Safety
• /
• v.39 no.2
• /
• pp.72-82
• /
• 2024

This study aimed to develop a scientifically and systematically standardized xylooligosaccharide analytical method that can be applied to products with various formulations. The analysis method was conducted using HPLC with Cadenza C₁₈ column, involving pre-column derivatization with 1-phenyl-3-methyl-5-pyrazoline (PMP) and UV detection at 254 nm. The xylooligosaccharide content was analyzed by converting xylooligosaccharide into xylose through acid hydrolysis. The pre-treated methods were compared and evaluated by varying sonication time, acid hydrolysis time, and concentration. Optimal equipment conditions were achieved with a mobile phase consisting of 20 mM potassium phosphate buffer (pH 6)-acetonitrile (78:22, v/v) through isocratic elution at a flow rate of 0.5 mL/min (254 nm). Furthermore, we validated the advanced standardized analysis method to support the suitability of the proposed analytical procedure such as specificity, linearity, detection limits (LOD), quantitative limits (LOQ), accuracy, and precision. The standardized analysis method is now in use for monitoring relevant health-functional food products available in the market. Our results have demonstrated that the standardized analysis method is expected to enhance the reliability of quality control for healthy functional foods containing xylooligosaccharide.

• Journal of Food Hygiene and Safety
• /
• v.39 no.2
• /
• pp.163-170
• /
• 2024

Red ginseng is manufactured as a health-functional food and is also present in various food types and in different product forms. However, there is currently no standardized regulation of ginsenoside content in foods containing red ginseng. In the present study, we analyzed the ginsenoside content of 66 red ginseng-containing foods and 35 health-functional foods collected online and directly from the market. The ginsenoside content was assessed using liquid chromatography (LC) and liquid chromatography-tandem mass spectrometry (LC-MS/MS) methods. The ginsenoside content of the various food types ranged 0.0 (not detected)-71.567 mg per daily intake of foods containing red ginseng. Sugar-preserved foods had the highest ginsenoside content, followed by solid teas, liquid teas, and red ginseng beverages. For health-functional foods, the ginsenoside content ranged 3.4-58.5 mg per daily intake, with levels ranging 83-607% of the indicated amounts. All values met the established standards. Upon comparing red ginseng health-functional foods and red ginseng-containing foods, the average ginsenoside content was determined to be 18.21 and 8.79 mg, respectively, thus being nearly twice as high in health-functional foods. However, there was a minimal difference between the ginsenoside content of red and black ginseng, with values of 11.84 and 12.63 mg, respectively. These findings provide insights on the variations in ginsenoside content of red and black ginseng in various food forms. This information is expected to be valuable for future regulations and consumer choice of products containing red ginseng.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.4
• /
• pp.187-194
• /
• 2023

Purpose: A mismatched size in the post and post space is a common problem during post-fixation. Since this discordance affects the bonding strength of the fiber-reinforced composite resin post (FRC Post), a corresponding luting agent is required. The aim of this study was to evaluate the bonding strength of the FRC post according to the fitness of the fiber post and the type of luting agent. Materials and Methods: Thirty mandibular premolar were endodontic-treated and assigned to two groups according to their prepared post space: Fitting (F) and Mismatching (M). These groups were further classified into three subgroups according to their luting agent: RelyX Unicem (ReX), Luxacore dual (Lux), and Duolink (Duo). A push-out test was performed to measure the push-out bond strengths. The fractured surfaces of each cross-section were then examined, and the fracture modes were classified. Results: In the ReX and Duo subgroups, the F group had a higher mean bond strength; however, the Lux subgroup had no significant difference between the F and M groups. In the analysis of the failure modes, the ReX subgroup had only adhesive failures between the cement and dentin. Conclusion: The result of this study showed that the bond strength of an FRC post was influenced by the type of luting agent and the mismatch between the diameter of the prepared post space and that of the post.

• Journal of Plant Biotechnology
• /
• v.50
• /
• pp.1-10
• /
• 2023

Sweet potato (Ipomoea batatas L. Lam) is an economically important root crop and a valuable source of nutrients, processed foods, animal feeds, and pigment materials. However, during post-harvest storage, storage roots of sweet potatoes are susceptible to decay caused by various microorganisms and diseases. Post-harvest curing is the most effective means of healing wounds and preventing spoilage by microorganisms during storage. In this study, we aimed to identify proteins involved in the molecular mechanisms related to curing and study proteomic changes during the post-curing storage period. For this purpose, changes in protein spots were analyzed through 2D-electrophoresis after treatment at 33℃ (curing) and 15℃ (control) for three days, followed by a storage period of eight weeks. As a result, we observed 31 differentially expressed protein spots between curing and control groups, among which 15 were identified. Among the identified proteins, the expression level of 'alpha-amylase (spot 1)' increased only after the curing treatment, whereas the expression levels of 'probable aldo-keto reductase 2-like (spot 3)' and 'hypothetical protein CHGG_01724 (spot 4)' increased in both the curing and control groups. However, the expression level of 'sporamin A (spot 10)' decreased in both the curing and control treatments. In the control treatment, the expression level of 'enolase (spot 14)' increased, but the expression levels of 'chain A of actinidin-E-64 complex+ (spot 19)', 'ascorbate peroxidase (spot 22)', and several 'sporamin proteins (spot 20, 21, 23, 24, 27, 29, 30, and 31)' decreased. These results are expected to help identify proteins related to the curing process in sweet potato storage roots, understand the mechanisms related to disease resistance during post-harvest storage, and derive candidate genes to develop new varieties with improved low-temperature storage capabilities in the future.

• Journal of Plant Biotechnology
• /
• v.50
• /
• pp.275-289
• /
• 2023

Since the implementation of the Living Modified Organisms (LMOs) Act in 2008, approximately 10 million tons of genetically modified corn, soybean, potato, canola, and other crops have been imported into South Korea. The import approval procedures have been completed for approximately 191 cases that include seven crops. Of these, approximately 90 cases, excluding crossbreeds of approved LMOs, were reviewed via consultation risk evaluation in four areas: human health, crop culture, natural ecology, and marine fishery environment. LMO developers in South Korea, who are major stakeholders in the import of LMO crops produced overseas, have raised concerns regarding procedural inefficiency in consultation reviews and the need of excessive reviews that are unsuitable for food-feed processing purposes. These procedures reflect the perspective of consultation agencies that deviate from the nature of risk assessment and demand specific supplementary data that do not reflect familiarity and substantial equilibrium. Based on frequent instances of unintentional environmental release of LMO crops imported into Korea, the ministries responsible for consultation insist on a review that considers the climate and natural environment of Korea. In addition, the ministries mandate that their reviews reflect the expertise of competent ministries and are based on risk assessment principles and methods in accordance with international guidelines. In this regard, considering that traits introduced into LMO crops involving familiar agricultural crops have been considered safe for more than two decades, we have suggested reasonable alternatives to several risk assessment items for agricultural LMOs. These alternatives can mitigate conflicts of interest among key stakeholders within the scope of the current LMO regulations.

• Food Science and Preservation
• /
• v.30 no.2
• /
• pp.272-286
• /
• 2023

Garlic sprouts can provide data on functional and food processing materials. This study compared the leaves, bulbs, and roots of garlic sprouts grown on smart farms during two growth periods (20 and 25 days). In addition, data for garlic bulbs grown in open fields were presented as reference materials. All garlic sprouts' total free sugar content decreased as the growth period increased. All plant parts' total organic acid content decreased as the growth period progressed, except for the root section. Potassium, phosphorus, and sulfur content increased during growth in all parts of the garlic sprouts. Alliin content decreased in all parts of the plant over time, whereas thiosulfinate content increased in the roots but decreased in the leaves and bulbs. Total polyphenol content increased in all parts of the plant during the growth period, except for the bulb, whereas the flavonoid content did not change significantly over time. The 2,2-diphenyl-1-picrylhydrazy (DPPH) and 2,2'-azinobis (3-ethylben-zothiazoline 6-sulfonate) (ABTS) free radical scavenging activities, as well as the superoxide dismutase (SOD)-like activity of garlic sprouts were 37.45-65.47%, 59.12-89.81%, and 89.52-98.59%, respectively. These activities tend to decrease during the growth period. Here, we showed that garlic sprouts have higher levels of functional substances and physiological activities than general garlic sprouts. It was also determined that a growth period of 20 days was suitable for garlic sprouts. Data for research on functional and food-processing materials can be obtained by analyzing garlic sprouts produced by smart farms.