• 과학과기술
• /
• 제25권2호통권273호
• /
• pp.8-44
• /
• 1992

• 한국자동차공학회논문집
• /
• 제12권6호
• /
• pp.151-157
• /
• 2004

In this paper deals with behavior of the magnetic abrasive using sludge on polishing characteristics in a new internal finishing of seamless stainless steel tube applying magnetic abrasive polishing. The magnetic abrasive using sludge-abrasive grain WA and GC used to resin bond fabricated low temperature. And sludge of magnetic abrasive powder fabricated that sludge was crused into 200 mesh. The previous research have made an experiment in the static state the movement of magnetic abrasive grain is nevertheless in the dynamic state. In this paper, We could have investigated into the changes of the movement of magnetic abrasive grain. In reference to this result, we could have made the experiment which is set under the condition of the magnetic flux density, polishing velocity according to the form of magnetic brush.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2018년도 추계학술발표대회
• /
• pp.13-16
• /
• 2018

인공지능의 중요성과 가치가 대두됨에 따라 이를 활용하여 다양한 챗봇들이 개발되고 있다. 그러나 신조어를 의미를 제공하는 챗봇 시스템의 연구가 부족하다. 본 논문에서는 Watson Assistant를 활용하여 신조어의 의미를 제공하는 신조어 챗봇 시스템을 구현하고자 한다. Watson Assistant는 자연어 형식으로 된 질문에 응답하는 것을 지원하는 API다. 웹 크롤링을 통해 신조어 데이터를 수집 및 저장하고, Watson Assistant를 활용하여 사용자의 의도를 파악하여 신조어의 의미를 추출한다. 제안한 시스템을 통해 현실 세계에서 끊임없이 양산되는 신조어의 의미를 빠르게 파악할 것이라고 기대한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.519-523
• /
• 2003

This paper describes the communication system of sequencing sorter. Generally sequencing sorter is a machine that sorts mails by delivery order. And designed sequencing sorter is composed of 5 physical modules. So, it is necessary to communicate with each module and to control this communication. A computer called Machine Management Computer, controls this. This paper is about the communication system with MMC and module controllers. This is PC-based, asynchronous full-duplex 4-wire serial systems. 3 protocol layers are presented and stop-and-wait flow control is adopted. Because designed sequencing sorter has to be operated high speed about 27,000 letters per hour, we analyzed the network traffic in the worst case. So, we could find that the communication system has to use above 115,200bps speed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.277-278
• /
• 2021

Conflict in public construction projects has increased for the last decades. It not only entails enormous social and economic costs but also makes stakeholders suffer from unnecessary expense and time waste. This study defines the the conflict index for public construction projects based on news data, and calculates conflict index for representative past and current public construction projects that has been deepened conflicts at the national level. The result indicates that the major conflict issue of the 2nd Jeju Airport Project are the environment and location whereas that of the Gaduk New Airport Project are the safety, location and necessity. This approach is expected to enable construction project managers to manage conflicts quantitatively based on comparing with past cases.

• Journal of Applied Biological Chemistry
• /
• 제61권2호
• /
• pp.131-134
• /
• 2018

국화(C. morifolium)품종인 '백마' 줄기를 80% MeOH 수용액으로 3회 반복 추출한 뒤, 감압농축한 추출물을 EtOAc, n-butyl alcohol과 $H_2O$층으로 계통분획을 실시하였다. EtOAc분획에 대하여 $SiO_2$ 및 ODS column chromatography를 반복실시하여 2종의 지방산 화합물을 분리 및 정제하였다. Nuclear magnetic resonance, infrared spectrometry, FAB-MS, GC-MS data를 해석하여, 화합물 1과 2를 각각 (2S)-1-O-${\beta}-{\text\tiny{D}}$-galactopyranosyl2,3-dilinoleoylglycerol과 (2S)-1-O-${\beta}-{\text\tiny{D}}$-galactopyranosyl-2,3-dipalmitoylglycerol로 구조동정 하였다.

• 농업과학연구
• /
• 제47권4호
• /
• pp.1147-1158
• /
• 2020

The purpose of this study was to measure the engine torque and rotational speed of a 67 kW class agricultural tractor according to tire type during plow tillage and to analyze the gear strength of the driving shift for the tractor. A field test was performed under the condition with a single tire (Test A) and dual tires (Test B) to increase the ground width of the rear tires. A load monitoring system was developed, and the engine torque and rotational speed were measured using controller area network (CAN) communication. The engine torque and rotational speed during plow tillage were calculated as the equivalent torque and speed using Palmgren Miner's rule. As a result, the equivalent torque and speed in Test A and Test B were 181.0 Nm and 1,913 rpm and 206.1 Nm and 2,130 rpm, respectively. As the ground width of the rear tire was increased, the bending stress in Test B was about 9.9 to 10.5% higher than that of the Test A, and the contact stress was about 4.6 to 4.9% higher than that of the Test A. Under all conditions, the safety factor for the bending and contact stress was 1 or more. Thus, the driving shift gears for the dual tire type are considered safe.

• 한국재료학회지
• /
• 제18권9호
• /
• pp.463-469
• /
• 2008

Non-sintering cement was manufactured with briquette ash. Alkali activator for compression bodies used a NaOH solution. In order to apply alkali-activated briquette ash and the non-sintering cement to concrete, several experimental studies were performed. It was necessary to study the binder obtained by means of a substitute for the cement. This study concentrated on strength development according to the concentration of NaOH solution, the curing temperature, and the curing time. The highest compressive strength of compression bodies appeared as $353kgf/cm^2$ cured at $80^{\circ}C$ for 28 days. This result indicates that a higher curing temperature is needed to get a higher strength body. Also, geopolymerization was examined by SEM and XRD analysis after the curing of compression bodies. According to SEM and XRD, the main reaction product in the alkali activated briquette ash is aluminosilicate crystal.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.110-110
• /
• 2009

Aerosol deposition method(ADM)는 상온에서 에어로졸화된 고상의 원료분말을 노즐을 통해 분사시켜 소결과정을 거치지 않고도 상온에서 고밀도 후막을 제조할 수 있는 공정으로서, 다양한 재료의 코팅이 가능하고, 코팅층의 조성 및 화학 양론비의 제어가 용이한 특징을 갖는다. 본 연구에서는 ADM을 이용하여 큰 유전상수, 압전계수, 초전계수, 탄성계수를 갖는 $BaTiO_3$ 분말을 원료로 하여 압전소자, 커패시터, 고전압용 유전체 등에 응용이 가능한 세라믹 층 형성에 관한 연구를 진행하였다. 또한 $BaTiO_3$ 같은 강유전체 세라믹을 이용하여 여러 가지 소자를 제조하는 경우 소자의 미세조직에 따라 물성이 영향을 받는 것으로 확인되어져 있다. 이에 본 연구에서는 세라믹 분말보다 상대적으로 탄성이 큰 polymer 분말을 첨가하여 후막 내부의 결정립의 크기가 20 nm 의 평균 결정립을 갖는 세라믹 후막에 비해 최대 10 배 정도까지 증가하는 것을 확인할 수 있었으며, 이에 따라 후막에서의 유전율 및 유전손실율의 전기적 특성 변화를 확인할 수 있었고, 이러한 물성변화에 대한 원인 고찰을 위하여 후막의 미세구조 및 화학조성 등에 대한 다양한 분석이 이루어 졌으며, 상온에서 성막되는 후막의 세라믹 층의 응용을 위한 최적의 공정조건을 제시하고자 한다.

• 한국안전학회지
• /
• 제19권2호
• /
• pp.6-10
• /
• 2004

The magnetic polishing is the useful method to finish using magnetic power of magnet. This method is one of precision polishing techniques and has an aim of the clean technology using for the pure of gas and inside of the clean pipe for transportation. The magnetic abrasive polishing method is not so common for machine that it tis not spreaded widely. There are rarely researcher in this field because of non-effectiveness of magnetic abrasive. Therefore, in ths paper deals with development of the magnetic abrasive using sludge. In this development, abrasive grain WA and GC used to resin bond fabricated low temperature. And magnetic material was fabricated from the sludge which were crused into 200 mesh and average diameter ${\o}$1.2mm ball type. The XRD analysis result show that only WA and GC abrasive and sludge crystal peaks detected which explains resin bond was not any more chemical reaction. From SEM analysis it tis found that WA and GC abrasive and sludge were stron bonding with each other by bond.