• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.1
• /
• pp.110-121
• /
• 2016

Link-16 is a representative TDL operated by US air force and NATO and supports structure of Multi-net. Under Multi-net, military operation can be conducted effectively since terminal nodes in Link-16 hop over total frequency band simultaneously. As air traffic is rapidly increasing, new aeronautical system is introduced or existing system should be expanded to accommodate increasing air traffic and frequency band assigned for operating this system is scarce. It is scheduled to implement frequency remapping to solve frequency scarcity. With limited frequency band for operating Link-16, as frequency remapping is implemented, degradation of Multi-net performance can happen since multiple access interference in Link-16 is increasing so it is difficult to conduct multiple military operations. Thus, Group-based frequency hopping scheme is proposed to solve this problem. We verified the performance of the proposed scheme is improved.

• The KIPS Transactions:PartB
• /
• v.10B no.3
• /
• pp.257-264
• /
• 2003

In the context of a dynamic trading environment, the ultimate goal of the financial forecasting system is to optimize a specific trading objective. This paper proposes a two-phase (extraction and filtering) stock trading system that aims at maximizing the rates of returns. Extraction of stocks is performed by searching specific time-series patterns described by a combination of values of technical indicators. In the filtering phase, several rules are applied to the extracted sets of stocks to select stocks to be actually traded. The filtering rules are automatically induced from past data. From a large database of daily stock prices, the values of technical indicators are calculated. They are used to make the extraction patterns, and the distributions of the discretization intervals of the values are calculated for both positive and negative data sets. We assumed that the values in the intervals of distinctive distribution may contribute to the prediction of future trend of stocks, so the rules for filtering stocks are automatically induced from the data in those intervals. We show the rates of returns when using our trading system outperform the market average. These results mean rule induction method using distributional differences is useful.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.1
• /
• pp.123-127
• /
• 2011

This study was conducted to decrease the microbial hazard in kimchi saline water with microwave plasma sterilization system and to evaluate the inactivation of foodborne pathogens by the microwave plasma sterilization system as a non-thermal treatment. Contamination of coliform, Escherichia coli, and yeasts and molds were detected in the used saline water, and the microbial populations increased as the saline water was reused repeatedly. The $D_{10}$-values of E. coli O157:H7, Salmonella Typhimurium, and Listeria monocytogenes by the microwave plasma sterilization system were 0.48, 0.52, and 0.45 cycle, respectively. In addition, the microbial populations of coliform, E. coli, Salmonella spp., total aerobic bacteria, and yeasts and molds in the used kimchi saline water were significantly decreased by treating the saline water using the microwave plasma sterilization system. Therefore, these results suggest that microwave plasma sterilization system can be useful in improving the microbial safety of the used saline water.

• Journal of Conservation Science
• /
• v.31 no.1
• /
• pp.65-73
• /
• 2015

The purposes of this study are helping the understanding on the Dae-hwe kind relics, verifying the deformation rate stability during conservation treatment and enhancing the conservation treatment work by investigating the status and analyzing the material of Taejo's portrait mounting decorative knots in the National Palace Museum of Korea collection. The result of material analysis on the decorative knots was that the outer threads are silk threads, inner threads are cotton threads, the width of the metal threads was $500{\sim}600{\mu}m$ and the major component of it was 55wt% copper. The result of verification on the deformation rate during the form correction of the bell tassel was that it has been found as stable by having the deformation rate of 1 TPCM or less. The result of glue selection test to be used on the repairing of tassel cross-section with its thread cut was that wheat starch adhesive has been found most appropriate because it has the highest tensile strength at all concentrations. The conservation and treatment procedure was established based on above results of analysis and test on the relic and the conservation treatment work including packaging has been completed in accordance with the established procedure.

• Journal of Korean society of Dental Hygiene
• /
• v.18 no.4
• /
• pp.477-488
• /
• 2018

Objectives: The purpose of this study was to investigate career competency, tasks, and job satisfaction of public servants, public institutions, and researchers. Methods: The survey was conducted about career competency, job satisfaction, and satisfaction on work life. Next, they interviewed on the characteristics of each job by two or three dimensions. The following conclusions were obtained from July to August 2017. Results: Career competencies were GPA with 3.87, 818 points of TOEIC score, and ITQ certification. Public servants required the information on literacy skills for employment and job performance, while civil servants need more than one year of clinical experience in the dental hospital. The non-commissioned officer needed a written test and fitness training. The health insurance review and assessment center required more than one year of experience from general hospital or medical institutions. Researchers required a research career, language skill, and professors required research and teaching experiences with clinical experience more than three years. The main job tasks were as follows; for public servants, they were official document processing and community projects. For the civilian workers and military/noncommissioned officers, they were medical assistant and administrative works. The employees of the health insurance review and assessment service are examining the medical expenses and the medical examination, the researchers are experimenting, researching and writing articles, and the teaching staff are lecturing and conducting individual research. Conclusions: The results of job satisfaction survey showed that occupational satisfaction was the highest in civil servants, researchers, and teaching professions. Job security was the highest in health workers and health inspectors' evaluation centers, and time vacancy was the highest in civilian workers and military/noncommissioned officers. If you want to work in such an institution, you should prepare elements that match your basic literacy and job specific characteristics. And we should try to increase the satisfaction of work even after work.

• Journal of Korea Foundry Society
• /
• v.20 no.2
• /
• pp.104-109
• /
• 2000

Three different white cast irons alloyed with Cr, V, Mo and W were prepared in order to study their abrasion wear behavior in as-cast and heat-treated conditions. The specimens were produced using a 15㎏-capacity high frequency induction furnace. Melts were super-heated to $1600^{\circ}C$, and poured at $1550^{\circ}C$ into Y-block pepset molds. Three combinations of the alloying elements were selected so as to obtain the different types of carbides : 3%C-10%Cr-5%Mo-5%W(alloy No. 1: $M_7C_3$ and $M_6C$), 3%C -10%V-5%Mo-5%W(alloy No. 2: MC and $M_2C$) and 3%C-17%Cr-3%V(alloy No. 3: $M_7C_3$ only). A scratching type abrasion test was carried out in the states of as-cast(AS), homogenizing(AH), air-hardening(AHF) and tempering(AHFT). First of all, the as-cast specimens were homogenized at $950^{\circ}C$ for 5h under the vacuum atmosphere. Then, they were austenitized at $1050^{\circ}C$ for 2h and followed by air-hardening in air. The air-hardened specimens were tempered at $300^{\circ}C$ for 3h. 1 ㎏ load was applied in order to contact the specimen with abrading wheel which was wound by 120 mesh SiC paper. The wear loss of the test piece(dimension: $50{\times}50{\times}5$ mm) was measured after one cycle of wear test and this procedure was repeated up to 8 cycles. In all the specimens, the abrasion wear loss was found to decrease in the order of AH, AS, AHFT and AHF states. Abrasion wear loss was lowest in the alloy No.2 and highest in the alloy No.1 except for the as-cast and homogenized condition in which the alloy No.3 showed the highest abrasion wear loss. The lowest abrasion wear loss of the alloy No.2 could be attributed to the fact that it contained primary and eutectic MC carbides, and eutectic $M_2C$ carbide with extremely high hardness. The matrix of each specimen was fully pearlitic in the as-cast state but it was transformed to martensite, tempered martensite and austenite depending upon the type of heat-treatment. From these results, it becomes clear that MC carbide is a significant phase to improve the abrasion wear resistance.

• Restorative Dentistry and Endodontics
• /
• v.35 no.5
• /
• pp.344-352
• /
• 2010

Objectives: The purpose of this study was to determine the setting time, compressive strength, solubility, and pH of mineral trioxide aggregate (MTA) mixed with glass ionomer cement (GIC) and to compare these properties with those of MTA, GIC, IRM, and SuperEBA. Materials and Methods: Setting time, compressive strength, and solubility were determined according to the ISO 9917 or 6876 method. The pH of the test materials was determined using a pH meter with specified electrode for solid specimen. Results: The setting time of MTA mixed with GIC was significantly shorter than that of MTA. Compressive strength of MTA mixed with GIC was significantly lower than that of other materials at all time points for 7 days. Solubility of 1 : 1 and 2 : 1 specimen from MTA mixed with GIC was significantly higher than that of other materials. Solubility of 1 : 2 specimen was similar to that of MTA. The pH of MTA mixed with GIC was 2-4 immediately after mixing and increased to 5-7 after 1 day. Conclusions: The setting time of MTA mixed with GIC was improved compared with MTA. However, other properties such as compressive strength and pH proved to be inferior to those of MTA. To be clinically feasible, further investigation is necessary to find the proper mixing ratio in order to improve the drawbacks of MTA without impairing the pre-existing advantages and to assess the biocompatibility.

• Restorative Dentistry and Endodontics
• /
• v.35 no.5
• /
• pp.359-367
• /
• 2010

Objectives: The purpose of the present in vitro study was to evaluate the biocompatibility of mineral trioxide aggregate (MTA) mixed with glass ionomer cement (GIC), and to compare it with that of MTA, GIC, IRM and SuperEBA. Materials and Methods: Experimental groups were divided into 3 groups such as 1 : 1, 2 : 1, and 1 : 2 groups depending on the mixing ratios of MTA powder and GIC powder. Instead of distilled water, GIC liquid was mixed with the powder. This study was carried out using MG-63 cells derived from human osteosarcoma. They were incubated for 1 day on the surfaces of disc samples and examined by scanning electron microscopy. To evaluate the cytotoxicity of test materials quantitatively, XTT assay was used. The cells were exposed to the extracts and incubated. Cell viability was recorded by measuring the optical density of each test well in reference to controls. Results: The SEM revealed that elongated, dense, and almost confluent cells were observed in the cultures of MTA mixed with GIC, MTA and GIC. On the contrary, cells on the surface of IRM or SuperEBA were round in shape. In XTT assay, cell viability of MTA mixed with GIC group was similar to that of MTA or GIC at all time points. IRM and SuperEBA showed significantly lower cell viability than other groups at all time points (p < 0.05). Conclusions: In this research MTA mixed with GIC showed similar cellular responses as MTA and GIC. It suggests that MTA mixed with GIC has good biocompatibility like MTA and GIC.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.45-60
• /
• 2020

The Brain Korea 21 (i.e., BK21) is a state-led higher education funding project that started in 2013. Previous literature investigating the effectiveness of the project mainly focused on massive quantitative outcomes of funded teams, and many studies reporting only self-reported data of graduate students who participated in the project. Therefore, there were not many BK21 studies that thoroughly examined the graduate students' performance, ability, satisfaction, etc. This study aims to determine the effect of the BK21 project participation on graduate students' academic performance, using objective (the number of published papers), self-rating (graduates' satisfaction), and other-rating (advisor's performance evaluation) data, which were sampled from 2013 to 2019 from a single funded team on a one-departmental-unit. The results showed that the participating graduate students had more published papers, and had higher performance evaluation scores in research, and overall abilities, than the non-participating graduate students. Further, participating students were largely satisfied with BK21 supports. This study has significance in that it demonstrates the positive influence of the BK21 project on graduate students' academic performance and satisfaction by the thorough investigation of a single social science funded team.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.5
• /
• pp.607-617
• /
• 2002

IETF has proposed CNRP that is a protocol exchanging CNRP objects between server and client for resolving a common name to URIs of the desired Internet resouces. CNRP enables users to access various services via the integrated interface, to easily get the desired resources, and to reuse the results not as the data but as the information. Whereby these advantages, CNRP will be generally used for the integration of the various Internet services or the applications where the resolution of common name is needed. But, CNRP specification doesn't describes the practical implementation method for server and client. Though a few prototype systems are developed in some researches using CNRP, they are not enough to be generally used for the various Internet applications because they doesn't include all objects specified in CNRP specification or they construct systems with one server. So, this Paper proposes the practical implementation method for CNRP server/client through analyzing and solving the problems occurred when implementing them, and implements all objects specified in CNRP specification. This paper also verifies the feasibility of the proposed method by developing the prototype system of the company name resolution service using the CNRP server/client implemented in this study. The CNRP server/client implemented in this paper are used to develop various CNRP application systems.