• Bulletin of the Korean Chemical Society
• /
• 제25권12호
• /
• pp.1859-1862
• /
• 2004

Europium doped yttrium vanadate ($YVO_4$:Eu) phosphor thin films were grown using a pulsed laser deposition (PLD) technique on silicon substrate. The structural characterization carried out on a series of ($YVO_4$:Eu films at post annealing temperature in the range of 550 $^{\circ}C$-1150 $^{\circ}C$ indicating that films were preferentially (200) oriented at post annealing temperature above 950 $^{\circ}C.$ Photoluminescence of thin film increased with the increase of post annealing temperature and ambient oxygen pressure though the thin film has the powder-like surface morphology at oxygen pressure above 200 mTorr. Photoluminescence decay from $^5D_1$ level of $Eu^{3+}$ show the great concentration dependency, which can be used as a good parameter to control the composition of ($YVO_4$:Eu thin film.

• 한국결정성장학회지
• /
• 제11권5호
• /
• pp.203-206
• /
• 2001

The applicability of shaped growth of yttrium orthovanadate was approved by successful growth of rod-like single crystals with the rectangular shape. Nd-doped single crystals with content of $Nd^{3+}$ ions of 1,2,3,5 atomic % in the starting melt were grown by the EFG technique with the size up to $10^{*}10mm$ in section and up to 85 mm in length. For the testing of the multiple growth of the orthovanadates, two and three Nd-and Yb-doped $YVO_{4}$ single crystals were grown by the EFG technique simultaneously up to 110 mm in length.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.784-787
• /
• 2008

Nanoscale $YVO_4:Eu^{3+}$ phosphor has been synthesized by a mild hydrothermal reaction at various experimental conditions. The particle and luminescent properties of nanophosphors were characterized with X-ray diffraction, electron microscopy and photoluminescence. It has been found that pH value play a key factor both controlling particle size and luminous efficiency.

• 한국전기전자재료학회논문지
• /
• 제29권11호
• /
• pp.707-711
• /
• 2016

ITO/Ag/ITO conductive films on PET (polyethylene terephthalate) was etched by a Q-switched diode-pumped neodymiun-doped yttrium vanadate (Nd:YVO4, ${\lambda}=1064nm$) laser. During the laser direct etching, the laser beam was incident on the two different directions of PET and the etching patterns were investigated and analyzed. At a lower repetition rate of laser pulse, the larger laser etched patterns were obtained by laser beam incident on reverse side of PET substrate. On the contrary, at a higher repetition rate, it was possible to find the larger etched patterns in case of the laser beam incidence on forward side of PET substrate. For the laser beam incidence on reverse side, the laser beam is expected to be transferred and scattered through the PET substrate and the laser beam energy is thought to be dependent on the etch laser pulse beam energy.

• 반도체디스플레이기술학회지
• /
• 제18권3호
• /
• pp.72-76
• /
• 2019

A Q-switched diode-pumped neodymium-doped yttrium vanadate (YVO₄, λ =1064nm) laser was used for the direct patterning of indium tin oxide (ITO) films on glass substrate. During the laser direct patterning, the laser beam was incident on the two different directions of glass substrate and the laser ablated patterns were compared and analyzed. At a low scanning speed of laser beam, the larger laser etched lines were obtained by laser beam incident in reverse side of glass substrate. On the contrary, at a higher scanning speed, the larger etched pattern sizes were found in case of the beam incidence from front side of glass substrate. Furthermore, it was impossible to find no ablated patterns in some laser beam conditions for the laser beam from reverse side at a much higher scanning speed and repetition rate of laser beam. The laser beam is expected to be transferred and scattered through the glass substrate and the laser beam energy is thought to be also dispersed and much more influenced by the overlapping of each laser beam spot.