• The Korean Journal of Pain
• /
• 제22권2호
• /
• pp.167-170
• /
• 2009

Pharmacological management is the first choice for treatment of the trigeminal neuralgia patients; however, if this mode of treatment fails a minimally invasive procedure should be performed. One of the most commonly used procedures is conventional radiofrequency lesioning of the Gasserian ganglion. Despite its popularity and success rate, this technique has disadvantages such as diminished corneal reflex, masseter weakness, numbness and anesthesia dolorosa. As a result, many studies have been conducted in an attempt to find a better method of treating trigeminal neuralgia. We report here a case of a trigeminal neuralgia patient that was treated with pulsed radiofrequency lesioning of the supraorbital and supratrochlear nerve due to pain in the frontal head that was refractory to the pharmacological treatments. Following the procedure, the Visual Analogue Scale score for pain decreased to 1-2/10 and the pain relief persisted for 7 months. These results indicate that pulsed radiofrequency treatment of the peripheral nerve may be useful for trigeminal neuralgia patients that do not respond to pharmacological treatments.

• Journal of Pharmaceutical Investigation
• /
• 제37권1호
• /
• pp.45-49
• /
• 2007

Dextran-5-aminosalicylic acid conjugate (dextran-5-ASA) was in vitro-evaluated as a polymeric colon-spe-cific prodrug of 5-aminosalicylic acid (5-ASA). Chemical stability of dextran-5-ASA in the pH 1.2 or 6.8 buffer solutions was investigated at 37 for 6 hrs. The dextran backbone was not degraded and no 5-ASA release was detected. Moreover, dextran-5-ASA neither liberated 5-ASA in the homogenates of the small intestine of rats nor was transported across Caco-2 cell monolayers, suggesting no significant loss of dextran-5-ASA during transit through the upper intestine. Furthermore, incubation of dextran-5-ASA in 10% cecal contents of rats released about 37% and 55% of 5-ASA bound to dextran in 8 hr and 24 hr, respectively. While that with either esterase or dextranase failed to liberate 5-ASA from the polymeric prodrug, incubation of dextran-5-ASA with both esterases and dextranse released 5-ASA up to about 24% of 5-ASA bound to dextran. These results suggest that, after oral administration of dextran-5-ASA, the polymeric prodrug is delivered specifically to and releases 5-ASA in the large intestine, and reveal that the 5-ASA release by cleavage of the ester bond requires precedent depolymerization of the dextran backbone.

• 대한인간공학회지
• /
• 제21권1호
• /
• pp.33-49
• /
• 2002

With the wide range of movement, the movement of neck accompanies the body surface change of neck and shoulders. And neck corresponds to the collar of garment, meaning that the body surface change of this part affects the construction of patterns for collars. So the purpose of this study was to manifest the changes of body surface in the neck and shoulder accompanied with the movement of the neck and to draw up the facts worth consideration when constructing the collar pattern. In this study, the draft of body surface of neck and shoulder was drawn up by gypsum method according to the 5 movements (standing at attention, neck bending - front, back, right, left). The length of body surface was measured and analyzed by ANOVA, post hoc test, correlation and regression analysis using SPSS 10.0 for Windows. The variation of the surface of neck was remarkable in the vertical lines than the horizontal ones. So the height of collar should be established considering the range of movement of the neck. It was the raising amount of c.f(center front) of neck and girth of neckbase (back) that were proved to have significantly varied after movement. With correlation analysis done, in every movement, the raising amount of side and the girth of neckbase had remarkably positive relation. The movement of the neck accompanied the variation of body surface in the shoulder as well. It was the part of scapula and side of neckbase that the variation was notable, suggesting that the surplus is needed in these parts.

• 대한족부족관절학회지
• /
• 제7권2호
• /
• pp.194-200
• /
• 2003

Purpose: To evaluate the effectiveness of ankle arthrography in diagnosis and treatment of the ankle sprain. Materials and Methods: Arthrography was performed to eighteen patients who were diagnosed as ankle sprain clinically from September, 1990 to April, 2003. Splint immobilization for three days and return to daily life were for the eleven patients who showed normal limits of extension of joint and no dye leakage on arthrography, cast for 3 weeks and compression brace wearing were for 4 patients who showed anterior talofibular ligament tear on arthrography. 3 patients diagnosed as anterior talofibular and calcaneofibular ligament tears were treated with cast for 6 weeks and then brace for 3 weeks. Results: The range of motion of the injured joint was recovered normally at the time of 3 month of postoperative follow up examination. But two patients complained a mild pain after exercise but it did not affect ordinary activities. Eleven patients who were normal on arthrography returned to daily activities in a week. Conclusion: It is reasonable to determine the extent of ankle sprain and treatment method for it using arthrography.

• 한방재활의학과학회지
• /
• 제19권4호
• /
• pp.175-187
• /
• 2009

Objectives : This study was performed to evaluate the effect of facial rejuvenation acupuncture on cases of sequela of facial nerve palsy. Methods : This study was carried out in respect of 5 cases of sequela of facial nerve palsy patients which had been treated in Dong-Shin university oriental hospital from 2009 year with House-Brackmann grading system(HBGS) above Grade IV. In this study the patients were treated by facial rejuvenation acupuncture. The effect of the treatment were evaluated via scales and picture. Results : After treatment with facial rejuvenation acupuncture, 5 patients improved H-B scale and symptoms of the sequela of facial nerve palsy. The average of H-B scale was increased from 3.2 to 6.4. There also formed forehead folds, better blinking of the eyes and improved asymmetry of the left and right face. Conclusions : In the study, facial rejuvenation acupuncture showed marked improvement in sequela of facial nerve palsy. Randomized-controlled trial for further evaluation will be needed in the future.

• 한국지반신소재학회논문집
• /
• 제7권1호
• /
• pp.23-29
• /
• 2008

지오텍스타일을 활용한 탈수처리공법은 지오텍스타일의 최신 적용분야로, 여과, 배수기능을 이용하여 기 직조한 지오텍스타일 포대 내에 산업슬러지, 하수정수장 슬러지, 특히 유수지의 준설오니슬러지 등을 주입 후 자중압밀과정을 통하여 고형물단계까지 탈수처리 하는 공법이다. 본 연구에서는 폴리프로필렌과 폴리에스터 두 종류의 지오튜브(지오텍스타일)의 물리적 특성을 살펴보고, 채움재 토사의 물리적 특성에 따른 탈수 효율과, 여과 및 배수기능을 원활이 수행할 수 있는 국산 고분자 토목섬유 적용성을 분석하였다. 실내시험은 지오텍스타일과 채움 토사간의 복합적 투수 특성을 규명하기 위한 실험을 수행하였다. 현장시험은 세립질(ML-OL) 토사의 채움 시 시간에 따른 유효높이 변화를 측정하여 적절한 슬러리 비율을 도출하였다. 각종 실내 및 현장시험결과, 세립질(ML-OL) 토사의 경우 물과 토사의 혼합비율은 최소한 6:4 이상이 되어야 하며, 폴리프로필렌 재질의 지오텍스타일이 필터 및 배수기능이 우수하며, 탈수처리 공법에 더 효과적인 것으로 나타났다.

• 한국수소및신에너지학회논문집
• /
• 제22권5호
• /
• pp.616-624
• /
• 2011

Hydrogen storage and release of Fe/Zr/Mo mixed oxide mediums were investigated by hydrogen reduction and water splitting oxidation($Fe_3O_4+4H_2{\rightleftharpoons}3Fe+4H_2O$). As the results of TPR/O, Mo was an additive to enhance the reactivity of water splitting oxidation as well as the stability of the medium. On the other hand, it seemed that $ZrO_2$ additive provided the passway for the diffusion of gaseous chemicals on the medium in repeated redox cycles. Among the Fe/Zr/Mo mediums, a FeZrMo-7 medium (Fe/Zr/Mo=80/13/7mol%) exhibited the best performance with good durability during five repeated redox cycles. The amount of hydrogen evolved on the medium was maintained at ca. 10.7mmol-$H_2$/g-medium corresponding to the hydrogen storage amount of ca. 2.2wt%.

• 한국수소및신에너지학회논문집
• /
• 제27권6호
• /
• pp.636-641
• /
• 2016

Alkaline water electrolysis is commercial hydrogen production technology. It is possible to operate MW scale plant. Because It used non-precious metal for electrode. But It has relatively low current density and low efficiency. In this study, research objective is development of anode for alkaline water electrolysis with low cost, high corrosion resistance and high efficiency. Stainless steel 316L (SUS 316L) was selected for a substrate of electrode. To improve corrosion resistance of substrate, Nickel (Ni) layer was electrodeposited on SUS 316L. Ni-Fe alloy was electrodeposited on the passivated Ni layer as active catalyst for oxygen evolution reaction(OER). We optimized preparation condition of Ni-Fe alloy electrodeposition by changing current density, electrodeposition time and composition ratio of Ni-Fe electrodeposition bath. This electrodes were electrochemically evaluated by using Linear sweep voltammetry (LSV) and Cyclic voltammetry (CV). The Ni-Fe alloy (Ni : Fe = 1 : 1) showed best activity of OER. The optimized electrode decreased overpotential about 40% at $100mA/cm^2$ compared with Ni anode.

• 한국전기전자재료학회논문지
• /
• 제31권7호
• /
• pp.455-461
• /
• 2018

Boron nitride (BN) nanofibers were fabricated using BN nanoparticles (70 nm) by electrospinning. Morphologies such as the diameter and density of the BN nanofibers are strongly influenced by the viscosity and dispersion state of the precursor solution. In this study, the precursor solution was prepared by ball milling BN nanoparticles and polyvinylpyrrolidone (PVP, Mw~1,300,000) in ethanol, which was electrospun and then calcined to produce BN fibers. High-quality BN nanofibers were well fabricated at a BN concentration of 15 wt% with their diameters in the range of 500 nm to 800 nm; the viscosity of the precursor solution was $400mPa{\cdot}S$. The calcination of the as-electrospun BN fibers seemed to be completed by holding them at $350^{\circ}C$ for 2 h considering the TGA data. The morphologies and phases of the BN fibers were investigated by scanning electron microscopy (SEM) and X-ray diffractometry (XRD), respectively; Fourier transform infrared (FT-IR) was also used for structure analysis.

• 전기학회논문지
• /
• 제61권12호
• /
• pp.1911-1919
• /
• 2012

In this paper, we focus on a robotic sealing process in which three robots are used. Each robot can be considered as a 7 axis redundant robot of which the first joint is prismatic and the last 6 joints are revolute. In the factory floor, robot path planning is not a simple problem and is not automated. They need experienced operators who can operate robots by teaching and playing back fashion. However, the robotic sealing process is well organized so the relative positions and orientations of the objects in the floor and robot paths are all pre-determined. Therefore by adopting robotic theory, we can optimally plan robot pathes without using teaching. In this paper, we analyze the sealing robot by using redundant manipulator theory and propose three different methods for path planning. For sealing paths outside of a car body, we propose two methods. The first one is resolving redundancy by using pseudo-inverse of Jacobian and the second one is by using weighted pseudo-inverse of Jacobian. The former is optimal in the sense of energy and the latter is optimal in the sense of manipulability. For sealing paths inside of a car body, we must consider collision avoidance so we propose a performance index for that purpose and a method for optimizing that performance index. We show by simulation that the proposed method can avoid collision with faithfully following the given end effector path.