• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.277-280
• /
• 2009

Mechanism of combustion frequencies occurring during combustion is experimentally investigated in model combustor with V-gutter flameholder. this combustor has a long duct shape with a cross section area of $40{\times}40\;mm$. The v-gutter type flameholder with 14mm width is mounted at the bottom of combustor. Kerosene and methane were used as fuel, and these fuel were injected transversely into air crossflow. It is found that combustion frequencies were considered as 1L longitudinal mode caused by combustor geometry and vortex shedding mode of flameholder. And fuel phase effect and nozzle effect were also observed in the low frequency range.

• Biomedical Science Letters
• /
• v.15 no.3
• /
• pp.187-197
• /
• 2009

Fingerprinting is a frontier technique that is the most frequently applied for human identification throughout the world. All citizens over 17 year old living in the Republic of Korea must be fingerprinted to obtain a certificate of resident registration. In Korea, for this reason, human identification through fingerprints has been far better developed and used efficiently both in crime scene investigation and in confirmation of an unidentified body. Scientific approaches have been made to accurately extract the metamorphosed fingerprints in various environments. Because most of the studies on fingerprinting have been accomplished with biometric techniques, researches on restoration of human dermal tissue and taking custody data after collecting fingerprints have been comparatively undermined. In this study, a newly innovative method for fingerprint extraction was developed using the polyester film with print powders and the high temperature-moisturizing method. Compared to the conventional fingerprinting method of paper with ink, minutiae numbers of fingerprints were greatly increased in polyester film with print powders after restoration of fingertips by high temperature-moisturization. This newly developed procedure would be an efficient fingerprinting technique which could be utilized in scientific investigation and in personal identification in the future. Furthermore, the new method for restoration and extraction of fingerprints are easy and inexpensive to practice for a number of human identification.

• Journal of ILASS-Korea
• /
• v.5 no.2
• /
• pp.53-60
• /
• 2000

An aerodynamically progressed model, which is called APTAB model. has been proposed for more accurate prediction of the deformation and breakup of a spray. Especially, the effects of the droplet deformation on the droplet aerodynamic external force are considered in this model, which was neglected in TAB model. It is found that the predicted droplet deformation using APTAB model shows better agreement with experimental data than those of other models for the droplets in both bag-type and shear-type breakup regimes. A new breakup criterion has been proposed to predict more reasonable breakup quantities, such as breakup deformation length, time and so on; i.e., it is defined that the breakup occurs when the internal liquid phase pressure of the deformed droplet at the equator is greater than that of the pole. The proposed breakup criterion shows more physical relationship between the degree of droplet deformation at breakup and the corresponding breakup Weber number as compared with the results with TAB and DDB models. Therefore, it provides better predictions of the experimental data than TAB and DDB models for the droplet deformation and time in both bag-type and shear-type breakup regimes.

• Journal of the Korean Society for Railway
• /
• v.8 no.5
• /
• pp.454-459
• /
• 2005

In this study, the relationship between tie shape and underbody train gust of high-speed train is numerically investigated. To this end, complex train underbody/railroad model is replaced by simple plate/tie model. And it is tried to find a most important parameter for reduction of underbody train gust through the Taguchi method and orthogonal array. As a result, it is verified that the height of tie is most sensitive to the underbody train gust because of the cavity effect between ties. When the width and distance between ties are decreased, underbody train gust is also reduced. Consequently, the heighter is examined which can give the similar effect of higher tie without replacement of tie. The 5cm heighter can reduce underbody train gust about $73\%$, which value is only $7\%$ less than the higher tie.

• Journal of Chest Surgery
• /
• v.51 no.3
• /
• pp.216-219
• /
• 2018

We report the case of a 16-year-old male patient who was involved in a traffic accident and transferred to the emergency department with mild chest pain. We initially did not find evidence of tracheal injury on computed tomography (CT). Within an hour after presentation, the patient developed severe dyspnea and newly developed subcutaneous emphysema and pneumoperitoneum were discovered. Abdominal CT showed no intra-abdominal injury. However, destruction of the right main bronchus was identified on coronal images of the initially performed CT scan. Emergency exploratory surgery was performed. The amputated right main bronchus was identified. End-to-end tracheobronchial anastomosis was performed, and the patient recovered without any complications.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.307-308
• /
• 2005

본 연구에서는 현재 주로 사용하고 있는 광파장인 980nm, 1310nm, 1480nm, 1550nm 에 대한 안정화된 광파워를 갖는 광원개발이다. 내부에 온도안정화와, 자체 광파워 피드벡에 의한 안정화 회로를 내장하고 있으며, 독립적 혹은 동시적으로 4 개의 광파장을 출력할 수 있도록 구성되어있다. 또한 0$\sim$ -7dBm 사이의 광파워를 0.5dB 단위로 가변시킬 수 있으며, +-0.05dB 이내의 안정성을 갖는다. 또한 RS-232 시리얼 통신으로 PC 와 인터페이스가 가능하며, 광출력 상태를 모니터링하거나 원격으로 광파워를 제어할 수 있도록 구성하였다. 온도범위는 +-0.5도 이내에서 제어가 가능하며, 이러한 부분으로 구성된 4 파장 광원은 +-0.05dB 이내에서 안정화된 광을 출력할 수 있게 되었다. 본 연구 개발을 수행한 결과 레이져 다이오드의 안정화에 대한 확실한 이론적 및 실험적인 결과를 얻게 되었으며, 현재 확산되고 있는 광통신 시장에서 광통신 부품, 광케이블, 통신망 등에서 각종 소자 및 선로의 광학적 특성을 측정하는데 필수적으로 이용될 것이다.

• Microbiology and Biotechnology Letters
• /
• v.22 no.6
• /
• pp.685-691
• /
• 1994

The biodegradation of aromatic compounds by mixed and monoculture was investigated in an artificial wastewater containing 500 mg/l of benzene(B), phenol(P), and toluene(T) in various combinations. None of three strains utilized P-xylene(X) as a carbon source, but they grew well on p-xylene in mixtures with benzene and toluene. In the mixed culture on mixed substrate, the length of lag phase was different depending on the nature of mixture. Cell growths of Flavobac- terium sp. BEN2 and Acinetobacter sp. GEM63 were inhibited in the presence of a 500 mg/l of phenol. When the mixed culture of three strains was cultured in a bench-scale reactor containing artificial wastewater, each of benzene, phenol, and toluene was not detected at 30 hrs, 50 hrs, and 12 hrs after incubation in the treatment. The removal rates of COD$_{t}$(total COD) and COD$_{s}$,(soluble COD) of upper phase after centrifugation during early 50 hrs were ca. 80% and ca. 93.8%, respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.6
• /
• pp.684-688
• /
• 2011

The feeding habits of Paralichthys olivaceus in the Uljin marine ranching area, located on the mid-eastern coast of Korea, were studied from January to November 2009. In total, 381 specimens were collected; fish ranged in size from 15.4 to 59.0 cm in total length. P. olivaceus is a carnivore, mainly consuming other fishes and crustaceans. The prey items of P. olivaceus changed ontogenetically. Small individuals fed on decapod crustaceans while large ones fed heavily on other fishes. The diet of P. olivaceus varied seasonally. Fish comprised the main prey items throughout the year. The stomach contents index (SCI) of each size class increased and the dietary breadth index (DBI) of each size class decreased as individuals grew.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.5-8
• /
• 2010

The GCSC injectors studied in this paper are those applied to the combustion chamber of staged combustion engines. Liquid fuel is injected through tangential holes along the outer wall of the GCSC injector forming a swirling sheet and oxygen rich gas generated by a preburner enters axially through the center orifice of the injector to form a gaseous jet. The spray characteristics of GCSC injectors under ambient/high pressure conditions and the effect of recess on spray characteristics have been examined in this paper. These results are expected to be used as fundamental data to develop of a staged combustion engine.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.57-60
• /
• 2011

The spray characteristics according to the recess length of the GCSC injector and the change of momentum flux ratio(MFR) of the gas and the liquid have been examined through high pressure cold flow test using a high pressure chamber. The liquid in this experiment was water, and the gas was nitrogen. The spray images were taken by a back-lit strobe imaging technique. Results showed that the spray was a wide hollow cone at the lower MFR(liquid velocity was fixed) and the spray became a narrow solid cone as the MFR was increased. And the injector with short recess length produced a narrow solid cone at the higher MFR.