• Journal of the Korean Society for Precision Engineering
• /
• v.3 no.3
• /
• pp.30-39
• /
• 1986

The burr worsens the accuracy of a workpiece and decreases a lot of pro- ductivity because it takes so much time and efforts to remove it. In this paper, the height, thickness and size of a drilling burr were derived from the drilling variables of drill diameter, chisel edge angle, web rate =($\Frac{2{\times}\;web\;thickness}{drill\;dia}$) and yielding stress of the workpiece as wel as feed, point angle and helix angle. The theoretical and experimental values of drilling thrust, torque and burr size of the testpiece were analyzed with the method of numerical analysis in a standard drilling condition. The order of choosing the drilling variables for the purpose of controlling the burr size was dealt in this paper with burr forming ratio. The results are as follows: (1) The drill diameter forms 42 percents feed 25 percents point angle 23 percents and web rate, chisel edge angle and gelix angle 5 percents of the partial differential slope of drilling thrust within the usual available ranges of drilling variables. (2) The drill diameter forms 55 percents feed 26 percents web rate 9 percents and chisel edge angle, point angle and helix angle 10 percents of the par- tial differential slope of drilling torque in the usual available ranges of drilling variables. (3) About 70 percents of the burr size can be controlled by feed, 29 percents by web rate in the case of a fixed diameter. It is recommended drilling10 variables to be chosen in the order of feed, web rate, drill diameter, point angle, chisel edge angle and helix angle so as to control the burr size effectively.

• Microbiology and Biotechnology Letters
• /
• v.43 no.2
• /
• pp.164-168
• /
• 2015

Citric acid is produced via submerged fermentation using yeasts. Among eight different strains of yeast, Candida zeylanoides was chosen as the strain for producing citric acid and optimized for various C/N ratios and effects of phosphate or Fe²⁺ ions in a clean carbon source medium (glucose: fructose, 1:1). The yield of citric acid was maximized at a C/N ratio of 40/1, a phosphate addition of 1.0 g/l, and an Fe²⁺ ion concentration of less than 50 mg/l, yielding up to 91 g/L in the broth with 18.5 g/l of isocitric acid in a six-day fermentation period using a pre-treated molasses medium. The yield of batch culture was 0.51 (Y_p/s, g/g) in a 5 L-Jar fermenter.

• Applied Biological Chemistry
• /
• v.30 no.3
• /
• pp.234-241
• /
• 1987

Conditions necessary for optimal plastein productivity from sardine protein hydrolysate using papain and pepsin were established. Sardine protein concentrate was hydrolyzed with pepsin yielding an approximate degree of hydrolysis of 77.2%. Enzyme induced plastein was optimized at: pH 6 for papain and pH 4 for pepsin; substrate concentrate, 50%(w/v) for papain and 40%(w/v) for pepsin; time of incubation, 24hr; enzyme/substrate ratio, 1 : 100(w/w). Plastein yields of 49.5% and 45.3% were found for papain and pepsin, respectively, when 10% trichloroacetic acid (TCA) was used as the precipitating agent. However, when plastein was precipitated by 50% ethanol, the yield was found to be 43.6% and 41.0% for papain and pepsin, respectively. Ethanol-precipitated plastein did not contain lipid and contained approximately 1.3% ash and 91.0% protein. In comparison, the TCA-precipitated plastein contained 74.2% protein, 0.5% lipid and 15.3% ash.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1999.06a
• /
• pp.137-159
• /
• 1999

Over the last three decades, Korean farming system has been directed to maximum agricultural production and to increase farmer's income through adoption of high-yielding crop varieties and high input of agrochemicals . These farming practices have resulted in problems of water-quality deterioration, soil degradation , and food safety. At present, over 40 million tones of animal waste are bing produced annually, which amounts to disposing the waste at the annual rate of 20 tones per ha in the total area of farming land in Korea. Nearly a half of total available water resources is used as irrigation water predominantly for rice paddy field. Thus, non-point source contamination of the water resources has been linked to agriculture across the nation. However, the extent to which agriculture contributes to the water quality is not fully known. Recently, Korean government provided various institutional measures to reduce the negative impacts of agricultural practices on the environ ental quality, and the Agricultural Environment Act was also passed by the legislature in 1998 and became effective January 1999. This Act does not cover the broad spectrum of the sustainable agriculture ; thus, the limited incentives within this Act are arguably ineffective to control the non-point source pollution. Recently new bulk blending of fertilizers(BB fertilizer) are bing produced (100, 000 tones in 1998) with Government subsidies. The BB fertilizers are to balance N-P-K ratio in the soils . Although the use of the BB fertilizers are encouraged with Government subsidies, non-point source pollution is still serious and will become worse. Precision farming is regarded as a new means for sustainable agriculture. It is a new technology that modifies the existing techniques and incorporates new one such as GIS, GPS , differential applicator to produce a new set of tools for the farmer to use. Precision farming, however, has constraints for individual farming practices. For exam le , farm size or parcel unit of each farmer is too small to adopt the precision agriculture on farmhouse-hold bases and farmer's ability to adopt the new technology is limited. However, it would be appropriate to establish local or regional cooperatives to operate such a precision farming system. It is recommended that Government provide sufficient incentives to help establish local and/or regional cooperatives.

• Steel and Composite Structures
• /
• v.11 no.5
• /
• pp.423-434
• /
• 2011

Tongwamen Bridge is a critical link between Dongmen Island and the land in Shipu town, Zhejiang province, China. It is a 238 m span, half-through, concrete-filled steel tubular (CFST) X-type arch bridge. The width of the deck is only 10 m, yielding a width-to-span ratio of 1/23.8. The plane truss type section rib was adopted, which made of two CFST chords and web member system. The lateral stability is the key issue to this bridge. However, the existing researches on Tongwamen Bridge's lateral stability are all the deterministic structural analysis. In this paper, a new strategy for positioning sampling points of the response surface method (RSM), based on the composite method combining RSM with geometric method for structural reliability analysis, is employed to obtain the reliability index of lateral stability. In addition the correlated parameters were discussed in detail to find the major factors. According to the analysis results, increasing the stiff of lateral braces between the arch ribs and setting the proper inward-incline degree of the arch rib can enhance obviously the reliability of lateral stability. Moreover, the deck action of non-orienting force is less than the two factors above. The calculated results indicate that the arch ribs are safe enough to keep excellent stability, and it provides the foundation that the plane truss rib would be a competitive solution for a long-span, narrow, CFST arch bridge.

• Journal of Nutrition and Health
• /
• v.33 no.4
• /
• pp.438-453
• /
• 2000

The purposes of this study were to estimate nutritional intakes of the long-lived elderly and to obtain the data for establishing dietary guidelines that may be recommended for the general population for the sake of longevity. The subjects of the study were 300 elederly people of age over 85 years living in Kyungpook Sung-Ju area who had no problem in daily living. Four times of food consumption survey were carried out seasonally by the repeated 24-hr recall method for one year. Mean daily energy intakes and RDA percentage of energy intakes of the male and female subjects were estimated as 1222 kcal(67.9%) and 1047 kcal(65.4%) respectively. Mean daily intakes of nutrients were estimated as 38.3g for protein, 287mg for calcium, 5.8mg for iron, 314R.E. for vitamin A, 0.6mg for vitamin B1 and 0.43mg for vitamin B2 The mean RDA percentages of nutrients intake were 64.4% and 59.8% for protein in male and female, 39.8% for Ca, 48.3% for Fe, 44.9% for vitamin A, 60% for vitamin B1, and 35.8% for B2. The average PFC ratio of energy-yielding nutrients throughout the year in male and female were 15.1 : 15.2 : 69.7 and 13.8 : 13.2 : 73.0 respectively. The mean daily intakes of energy and most of nutreints were significantly high in winter season. The contribution of plant food sources to nutrient intakes were over 60% for protein and fat, 50% for calcium, and 70% for iron. Long-lived elderly people an Sung-Ju, Kyungpook showed considerably smaller physiques compared to the avergae Korean elderly, however their average BMI fell in normal range. The subjects were consuming much less energy and nutrients compared to the present Korean RDA for the elderly over age 75. The subject showed relatively good health state in spite of low intakes of energy and nutrients. Therefore it seems to be necessary to establish a set of new RDA for the elderly over age 8.5.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11A
• /
• pp.1271-1277
• /
• 2004

We propose a foe phase tuner and a rounding processor for a numerically controlled oscillator (NCO), yielding a reduced phase error in generating a digital sine waveform. By using the fine Phase tuner Presented in this paper, when the ratio of the desired sine wave frequency to the clock frequency is expressed as a fraction, an accurate adjustment in representing the fractional value can be achieved with simple hardware. In addition, the proposed rounding processor reduces the effects of phase truncation on the output spectrum. Logic simulation results of the NCO for multi-carrier channel separation in cdma2000 3X multi-carrier receive system using these techniques show that the noise spectrum and mean square error (MSE) are reduced by 8.68 dB and 5.5 dB, respectively compared to those of truncation method and 2.38 dB and 0.83 dB, respectively, compared to those of Paul's scheme.

• Transactions of Materials Processing
• /
• v.27 no.5
• /
• pp.281-288
• /
• 2018

This study deals with the microstructure and tensile properties of 600 and 700 MPa-grade high-strength seismic reinforced steel bars. High-strength seismic resistant reinforced steel bars (SD 600S and SD 700S) were fabricated by TempCore process, especially the SD 700S specimen was more rapid cooled than the SD 600S specimen during the TempCore process. Although two specimens had microstructure of tempered martensite in the surface region, the SD 600S specimen had ferrite-degenerated pearlite in the center region, whereas the SD 700S specimen had bainite-ferrite-degenerated pearlite in the center region. Therefore, their hardness was highest in the surface region and revealed a tendency to decrease from the surface region to the center region because tempered martensite has higher hardness than ferrite-degenerated pearlite or bainite. The SD 700S specimen revealed higher hardness in the center region than SD 600S specimen because it contained a larger amount of bainite as well as ferrite-degenerated pearlite. On the other hand, tensile test results indicated the SD 600S and SD 700S specimens revealed continuous yielding behavior because of formation of degenerated pearlite or bainite in the center region. The SD 600S specimen had a little higher tensile-to-yield ratio because the presence of ferrite and degenerated pearlite in the center region and the lower fraction of tempered martensite enhance work hardening.

• Journal of Hydrogen and New Energy
• /
• v.19 no.1
• /
• pp.10-17
• /
• 2008

This study has been focused on the partial oxidation(POX) of n-octane over Rh-containing catalysts supported on alumina. The catalysts for this reaction were prepared by incipient wetness(IW) and co-gel(CG) methods, followed by the calcination at $900{\circ}C$ or $1,200{\circ}C$. When applied to the POX of n-octane carried out at $600{\circ}C$ with C/O=3 and GHSV=3,450/h, the catalyst prepared by the CG method and calcined at $1,200{\circ}C$ showed the best activity, yielding 42% syngas($H_2$+CO) with the $H_2$/CO ratio of $2{\sim}2.4$. To enhance the activity and stability of catalysts, bimetallic catalysts were synthesized by the CG method. As a result, the performance of Rh-Ni/$Al_2O_3$ catalyst was superior to that of Rh/$Al_2O_3$ catalyst in terms of the catalyst stability, due to the retarding effect on the Rh-to-$Rh_2O_3$ transition by the addition of Ni. This result was confirmed by XRD, TEM, and TPR characterizations.

• Journal of the Korea Concrete Institute
• /
• v.29 no.3
• /
• pp.291-298
• /
• 2017

The objective of the present study is to evaluate the cyclic flexural behavior of a hybrid H-steel-reinforced concrete (HSRC) beam at the connection with a H-steel column. The test parameter investigated was the configuration of dowel bars at the joint region of the HSRC beam. The HSRC beam was designed to have plastic hinge at the end of the H-steel beam rather than the RC beam section near the joint. All specimens showed a considerable ductile behavior without a sudden drop of th applied load, resulting in the displacement ductility ratio exceeding 4.6, although an unexpected premature welding failure occurred at the flanges of H-steel beams connecting to H-steel column. The crack propagation in the RC beam region, flexural strength, and ductility of HSRC beam system were insignificantly affected by the configuration of dowel bars. The flexural strength of HSRC beam system governed by the yielding of H-steel beam could be conservatively evaluated from the assumption of a perfect plasticity state along the section.