• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.404-411
• /
• 2009

The steel pipe of steel-concrete composite piles increases the pile strength and induces the ductile failure by constraining the deformation of the inner concrete. In this research, the load-movement relations and the reinforcement effect by the outer steel pipe in the steel-concrete composite pile were analyzed by performing three-dimensional numerical analyses, which can simulate the yielding behavior of the pile material and the elasto-plastic behavior of soils. The parameters analyzed in the study include three pile materials of steel, concrete and composite, pile diameter and loading direction. As the results, the axial capacity of the composite pile was 1.9 times larger than that of the steel pipe pile and similar with that of the concrete pile. At the allowable movement criteria, the horizontal capacity of the composite pile was 1.46 times larger than that of the steel pile and 1.25 times larger than that of the concrete pile. In addition, the horizontal movement at the pile head of the composite pile was about 78% of that of the steel pile and about 53% of that of the concrete pile, which showed that the movement reduction effect of the composite pile was significant and enables the economical design of drilled shafts.

• 한국지반공학회지:지반
• /
• 제11권4호
• /
• pp.5-12
• /
• 1995

말뚝의 재하시험이 연직지지력을 추정하기 위한 다양한 정보를 제공한다 할지라도 시험 말뚝을 극한하중까지 도달하도록 충분히 재하시킨다는 것은 상당히 어려운 일이며, 이와 같이 파괴시까지 재하하지 못한 말뚝의 연직재하시험의 결과로부터 지지력을 추정하는데 있어서 많은 도해적 방법과 수학적 방법이 시도되었다. 파괴하중을 추정하기 위하여 Southwel 연 이론을 기초로 최대곡률을 이용한 해석적 방법이 필자 등에 의하여 발표된 바 있다. 여기서 파괴하중은 Crowther가 정의한 바와 같이 특정한 기준 을 초과하였을 때의 하중으로 정의하였다. 본 논문은 최대곡률 방법에 의한 허용하중을 결정하기 위하여 Davission의 방법 및 DIN 4014의 허용하중과 비교하여 최대곡률 방법의 안전율을 2.5로 제안하였다. 그 결과 파괴시까지 재하하지 못한 연직재하시험의 결과치로부터 말뚝의 연직지지력을 추정 하는데 있어서 최대곡률 방법에 의한 허용하중의 결정은 타당성이 있는 것으로 판단되었다.

• Journal of Preventive Medicine and Public Health
• /
• 제34권4호
• /
• pp.363-371
• /
• 2001

Objectives : To assess the degree of quality improvement (QI) implementation and to identify its associated factors. Methods : A mailed questionnaire survey of the QI staffs at hospitals with 400 beds or more was conducted between September 15 and October 30, 2000. Of the 108 hospitals eligible for inclusion in our study, 79 participated, yielding a response rate of 73.1%. After excluding 12 hospitals that did not perform any QI activities, 117 responses from 67 hospitals were used in our analysis. The degree of QI implementation was measured using the Malcolm Baldrige National Quality Award Criteria (MBNQAC). Factors evaluated for association with the degree of QI implementation were cultural, technical, strategic, and structural factors of the hospitals. Results : The average 01 implementation score across the 7 dimensions of MBNQAC was 3.34 on a 5-point scale, with the highest score for the area of customer satisfaction (3.88) followed by information and analysis (3.59) and quality management (3.35). The results of regression analysis showed that hospitals with a ofter information system (p<0.05) and using scientific and systematic problem solving approach (p<0.01) tended to perform a higher degree of QI implementation. While statistically insignificant, positive associations were observed for the factors of group or developmental culture, the degree of employee empowerment, and the use of prospective strategy. Conclusions : It appears that the most important factors contributing to active implementation of QI in Korean hospitals were the use of scientific skills in decision making, and having a quality information system to produce precise and valid information.

• Archives of Plastic Surgery
• /
• 제49권3호
• /
• pp.324-331
• /
• 2022

Prior abdominal liposuction can be viewed as a relative or absolute contraindication to abdominally based autologous breast reconstruction given concerns for damaged perforators and scarring complicating intraoperative dissection. This systematic review aims to explore the outcomes of abdominally based breast reconstruction in patients with a history of abdominal liposuction. A Preferred Reporting Items for Systematic Reviews and Meta-Analyses-guided literature search was conducted using PubMed, Scopus, and Web of Science from the earliest available date through June 2020. Deep inferior epigastric perforator, muscle-sparing transverse rectus abdominis musculocutaneous (TRAM), superficial inferior epigastric artery, and pedicled TRAM flaps were included for evaluation. Complications included total or partial flap loss, fat necrosis, seroma, delayed wound healing, and donor site complications. After inclusion criteria were applied, 336 non-duplicate articles were screened, yielding 11 for final review, representing 55 flaps in 43 patients. There was no instance of total flap loss, eight (14.5%) flaps developed partial loss or fat necrosis, three (5.4%) flaps had delayed wound healing, and two (4.6%) patients had donor site complications. Most authors (8/11) utilized some type of preoperative imaging. Doppler ultrasonography was the most used modality, and these patients had the lowest rate of partial flap loss or flap fat necrosis (8%), followed by those without any preoperative imaging (10%). In conclusion, this review supports that patients undergoing abdominally based autologous breast reconstruction with a history of abdominal liposuction are not at an increased risk of flap or donor site complications. Although preoperative imaging was common, it did not reliably decrease complications. Further prospective studies are needed to address the role of imaging in improving outcomes.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1996년도 추계학술대회논문집
• /
• pp.47-55
• /
• 1996

This study developed a comprehensive and easily applicable nuclear reactor control system evaluation method using reactor operators behavioral and mental workload database. A proposed control panel design cycle consists of the 5 steps: (1) finding out inconvenient, erroneous, and mentally stressful factors for the proposed design through evaluative experiments, (2) drafting improved design alternatives considering detective factors found out in the step (1), (3) comparative experiements for the design alternatives, (4) selecting a best design alternative, (5) returning to the step (1) and repeating the design cycle. Reactor operators behavioral and mental workload database collected from evaluative experiments in the step (1) and comparative experiments in the step (3) of the design cycle have a key roll in finding out defective factors and yielding the criteria for selection of the proposed reactor control systems. The behavioral database was designed to include the major informations about reactor operators' control behaviors: beginning time of operations, involved displays, classification of observational behaviors, dehaviors, decisions, involved control devices, classification of control behaviors, communications, emotional status, opinions for man-machine interface, and system event log. The database for mental workload scored from various physiological variables-EEG, EOG, ECG, and respir- ation pattern-was developed to indicate the most stressful situation during reactor control operations and to give hints for defective design factors. An experimental test for the evaluation method applied to the Compact Nuclear Simulator (CNS) installed in Korea Atomic Energy Research Institute (KAERI) suggested that some defective design factors of analog indicators should be improved and that automatization of power control to a target level would give relaxation to the subject operators in stressful situation.

• 한국지반공학회논문집
• /
• 제26권11호
• /
• pp.29-38
• /
• 2010

강관합성말뚝은 외부 강관의 합성 구속효과에 의해 말뚝강도가 커지고, 연성파괴 거동이 발생한다. 본 연구에서는 해상 지반에 근입된 무리말뚝에 대하여 말뚝재료의 항복거동 및 지반의 탄소성 거동을 함께 고려할 수 있는 3차원 수치해석을 수행하여 하중-변위 거동 및 강관합성말뚝의 보강효과를 분석하였다. 이를 위하여 강관, 콘크리트, 강관합성말뚝에 대하여 각각 말뚝간격, 말뚝직경 그리고 재하방향을 달리한 변수연구를 수행하였다. 그 결과 수직방향지지력의 경우 강관합성말뚝은 강관말뚝과 비교하여 평균 90% 큰 것으로 나타났고, 콘크리트 말뚝에 대하여는 평균적으로 동일하게 나타났다. 그러고 허용변위 기준에서의 수평방향 지지력의 경우 강관합성말뚝은 강관말뚝보다 평균 50%, 콘크리트 말뚝보다 평균 22% 더 큰 것으로 나타났다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권1호
• /
• pp.67-74
• /
• 2021

본 논문에서는 노후화된 PSC I형 교량을 대상으로 철근부식에 대한 구조적 안전성을 평가하였다. 대상 PSC I형 교량은 실제 구조물을 참고하여 철근을 배근하고 해석 시 콘크리트의 파괴와 철근의 항복을 고려하였다. 한국시설안전공단 정밀안전진단의 교량 평가 기준을 참고하여 철근노출면적률과 철근부식률로 구분하여 총 32가지의 철근부식 시나리오를 구성하였다. 철근노출은 교량의 바닥판 하부 인장철근이 콘크리트 피복 탈락에 의해 노출된 것으로 가정하였다. 각 시나리오별 해석 결과, PSC I형 교량의 안전율과 내하율은 철근노출면적률과 철근부식률이 증가함에 따라 감소하였다. 철근부식률이 50% 이상일 경우는 모든 철근노출면적률에 대해서 안전성등급을 세밀하게 분석할 필요가 있었으며, 철근부식률 57%이상인 경우는 철근노출면적률에 관계없이 모두 E등급으로 산정되었다. 철근노출면적률 2%에 대해서 상관도 분석을 실시한 결과,철근부식률이 약 55.8% 까지는 A등급, 56.9% 까지는 C등급, 58.5% 까지는 D등급, 58.5% 이상인 경우 E등급으로 평가되었다. 본 연구를 통해 노후화된 교량에 대한 철근부식의 정량적인 구조적 안전성 평가가 필요할 것으로 판단된다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제5권2호
• /
• pp.153-162
• /
• 2002

Earlier breeding experiments undertaken at Central Sericultural Research and Training Institute, Mysore, India since a decade had resulted in the development of many productive and qualitatively superior bivoltine hybrids. However, the hot climatic conditions of tropics prevailing particularly in summer are not conducive to rear these high yielding bivoltine hybrids. This has necessitated breeding of compatible bivoltine hybrids for year-round rearing. Accordingly, the Japanese hybrid, B2Ol ${\times}$ BCS12 which was found to be tolerant to high temperature was used as breeding resource material. Following hybridization and selection rearing of silkworms was taken up in SERICATRON (Environmental chamber with precise and automatic control facilities for uniform maintenance of temperature and humidity) at high temperature of $36{\times}1^{\circ}C$ and 85${\times}$5% RH in fifth instar and the control batches at $25{\times}1^{\circ}C$ and 65{\times}$5% RH. Directional selection was resorted to the batches reared at 36$\pm$1$^{\circ}C$ till F$_{5}$ keeping pupation rate as important selection criteria. From $F_{2}% onwards the experiment was modified in such a way as to conduct normal rearing every alternate generation to regain the lost vitality due to continuous exposure to high temperature and high humidity stress. At $F_{2}$ , Oval and dumb-bell cocoons were separated out and designated as CSR18 and CSR19, respectively. By utilizing these lines at $F_{12}$, the hybrid CSR18$\times$CSR19 was prepared and studied for the thermotolerance by subjecting to stress condition at high temperature of 36$\pm$1$^{\circ}C$ and 85$\pm$5% RH in fifth instar and the control batches at $25{\times}1^{\circ}C$ and 65${\times}$5% RH. The better performance of CSR18${\times}$CSR19 (survival > 88%) at $36{\times}1^{\circ}C$ clearly indicates the general superiority of CSR18${\times}$CSR19 with regard to high temperature tolerance over the productive hybrids and CSR18$\times$CSR19 can perform well in varied agro-climatic conditions of the tropics with optimum qualitative and quantitative characteristics.s.

• 한국콘텐츠학회논문지
• /
• 제11권7호
• /
• pp.168-178
• /
• 2011

현대 그래픽디자인은 포스트모더니즘이라는 거대한 소용돌이치는 파도 속에서 모더니즘 이후에 이루어진 단순한 미학을 뛰어넘어 급진적으로 탈바꿈 되고 발전해 왔다. 그리고 타이포그래피는 모더니즘의 산물인 그리드의 규범에서 국제 타이포그래피 양식으로 발전하면서 현재로 오게 되었다. 이러한 양식의 대표적 인물 중 한 사람인 에드워드 펠라Edward Fella를 꼽을 수 있으며, 펠라는 현재 캘리포니아 예술학교CalArts에서 열정적으로 그래픽디자인과 타이포그래피 강의를 진행하고 있다. 펠라는 오랜 시간을 해체주의적 표현의 결과물 창출과 미학이 바탕이 된 디자인 아이덴티티 정립 연구에 매진했다. 이에 프랑스 근대 철학과 미학을 바탕으로 전 세계의 그래픽디자인계와 타이포그래피 교육의 획을 긋고 있는 펠라의 그래피즘을 살펴보며 현대그래픽디자인에 끼친 미적 범주를 연구 하였다. 펠라의 작업은 무의식과 잠재의식 속에 존재하는 그래픽 모티브를 활용하여 여과 없이 걸러진 작업들을 펼치게 된다. 이에 따른 그의 그래픽 형식을 해체주의적 미학으로 여기며 연구하게 된다. 현시대가 포스트모더니즘의 끝자락에서 표류하며 불확실한 시대로 흘러 하는 탈형식의 시대로 규정하지만 이러한 시대에 그의 타이포그래피를 통하여 현재와 미래의 세계 그래픽디자인의 흐름을 고찰하며 표현양상을 포괄적으로 파악하는 계기가 될 수 있음을 시사하고 있다고 하겠다.

• Rapid Communication in Photoscience
• /
• 제1권1호
• /
• pp.1-9
• /
• 2012

Luminescent lanthanide complexes have been overviewed for advanced photonics applications. Lanthanide(III) ions ($Ln^{3+}$) were encapsulated by the luminescent ligands such as metalloporphyrins, naphthalenes, anthracene, push-pull diketone derivatives and boron dipyrromethene(bodipy). The energy levels of the luminescent ligands were tailored to maintain the effective energy transfer process from luminescent ligands to $Ln^{3+}$ ions for getting a higher optical amplification gain. Also, key parameters for emission enhancement and efficient energy transfer pathways for the sensitization of $Ln^{3+}$ ions by luminescent ligands were investigated. Furthermore, to enhance the optophysical properties of novel luminescent $Ln^{3+}$ complexes, aryl ether-functionalized dendrons as photon antennas have been incorporated into luminescent $Ln^{3+}$ complexes, yielding novel $Ln^{3+}$-cored dendrimer complex such as metalloporphyrins, naphthalenes, and anthracenes bearing the Fr$\acute{e}$chet aryl-ether dendrons, namely, ($Er^{3+}-[Gn-Pt-Por]_3$ (terpy), $Er^{3+}-[Gn-Naph]_3$(terpy) and $Er^{3+}-[Gn-An]_3$(terpy)). These complexs showed much stronger near-IR emission bands at 1530 nm, originated from the 4f-4f electronic transition of the first excited state ($^4I_{13/2}$) to the ground state ($^4I_{15/2}$) of the partially filled 4f shell. A significant decrease in the fluorescence of metalloporphyrins, naphthalenes and anthracene ligand were accompanied by a strong increase in the near IR emission of the $Ln^{3+}$ ions. The near IR emission intensities of $Ln^{3+}$ ions in the lanthanide(III)-encapsulated dendrimer complexes were dramatically enhanced with increasing the generation number (n) of dendrons, due to the site-isolation and the light-harvesting(LH) effects. Furthermore, it was first attempted to distinguish between the site-isolation and the light-harvesting effects in the present complexes. In this review, synthesis and photophysical studies of inert and stable luminescent $Ln^{3+}$ complexes will be dealt for the advanced photonics applications. Also, the review will include the exploratory investigation of the key parameters for emission enhancement and the effective energy transfer pathways from luminescent ligands to $Ln^{3+}$ ions with $Ln^{3+}$-chelated prototype complexes.