• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.5
• /
• pp.519-522
• /
• 1997

Buffalo heifers weighing from 400 - 500 kg and having a history of reproductive problems like anestrus, irregular estrus or failure to conceive after repeated inseminations were administered subcutaneously with estradiol-$17{\beta}$ and progesterone in two dosage rate 0.1 mg and 0.25 mg, respectively, per kg body weight per day for 7 days in experiment-I and 0.1 mg and 0.125 mg, respectively, per kg body weight per day for 7 days in experiment II. In experiment-I, 9 out of 10 buffaloes responded positively to the hormonal treatment. Milk secretion started between 14-20 days after the start of the treatment. The total milk yield in the successfully induced animals varied from 471.98-625.40 kg. The average daily milk yield varied from 2.08-2.76 kg and peak yield from 3.6-5.3 kg. The time taken to reach peak yield varied from 12-14 weeks. In experiment - II, the established lactation response was absent, although milk secretion process was initiated, the yield could not reach more than 50 - 100 gm at each milking. In experiment - I, the first estrus occurred between days 87 - 231 following the hormonal treatment. Four animals in which lactation was established successfully got pregnant after one or two services. In experiment - II the first estrus occurred between 85 - 173 days following the treatment and only one animal got pregnant.

• Korean Journal of Food Science and Technology
• /
• v.47 no.2
• /
• pp.149-157
• /
• 2015

The effects of feed moisture content (25, 35, and 45%), screw speed (230, 250, and 270 rpm), and barrel temperature (130, 140, and $150^{\circ}C$) on the product yield and soluble arabinoxylan (SAX) content from destarched corn fiber (DCF), and its optimization were investigated. The yield and SAX content of corn fiber gum (CFG) from the extruded destarched corn fiber (EDCF) were higher than those of DCF. Statistical analyses revealed that the feed moisture content and barrel temperature had a significant effect on the CFG yield and total SAX content. The optimum extrusion pretreatment conditions were as follows: feed moisture content, 30%; screw speed, 260 rpm; barrel temperature, $133^{\circ}C$. This study showed that the response surface methodology was suitable for the optimization of the extrusion conditions used to maximize the CFG yield and total SAX content from EDCF.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.298-301
• /
• 2007

Magnesium alloy sheets have unique mechanical properties such as high in-plane anisotropy/asymmetry of yield stress and hardening response. The unusual mechanical behavior of magnesium alloys has been understood by the limited symmetry crystal structure of HCP metals or by deformation twinning. In the present study, the continuum plasticity models considering the unusual plastic behavior of magnesium alloy sheet were derived for a finite element analysis. A new hardening law based on two-surface model was developed to consider the general stress-strain response of metal sheets such as Bauschinger effect, transient behavior and the unusual asymmetry. Three deformation modes observed during the continuous tension/compression tests were mathematically formulated with simplified relations between the state of deformation and their histories. In terms of the anisotropy and asymmetry of the initial yield stress, the Drucker-Prager's pressure dependent yield surface was modified to include the anisotropy of magnesium alloys.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.spc
• /
• pp.72-77
• /
• 2008

This study was carried out to determine the response of the rice yield and grain quality by rice leaf folder (RLF, Cnaphalocrocis medinalis G.) and identify the damages caused by different transplanting dates, nitrogen amounts and chlorophyll amounts (SPAD value) of rice leaf. As the damage degree of RLF was getting severer, the ripened grain rate and 1000-grain weight were decreased and due to the increasing of chalky rice rate the rate of head rice was reduced. Therefore, the yield of head rice was decreased by 36% in heavily damaged rice plant. Among the physicochemical characteristics, protein content of rice grain was increased but amylose content was reduced, consequently, the palatability was deteriorated in heavily damaged rice by RLF. The degree of damage of RLF was getting serious as transplanting date was delayed and as the amount of nitrogen was increased. In the relationship between the SPAD value and the damage degree of RLF, as the SPAD value was increased by nitrogen fertilizing, the damage degree was also increased exponential functionally.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.2 s.31
• /
• pp.229-235
• /
• 1997

In order to check the influence of the randomness in yield strengths on the energy dissipation capacity of steel structures, behaviour factors applied for the "Response Spectrum Method" and their distributions are determined in this study with 7 steel framed models. Also 4 artificial accelerograms simulated with a given spectrum are applied to check the influence of the randomness in seismic action on the behviour factor. To execute numerous time-step calculations for the investigation a time-step analysis method is developed and applied after the reliability estimation to determine the action effects.

• Korean Journal of Pharmacognosy
• /
• v.49 no.1
• /
• pp.65-69
• /
• 2018

Torilin is a major sesquiterpene of Torilis japonica (Umbelliferae) fruits and known to be a melanogenesis inhibitor. Extraction conditions are important factor for the efficient preparation to save cost and time in economic aspects. For this reason, this study was conducted to optimize the extraction condition for maximal yield of torilin. For optimization, extraction factors such as extraction solvent, extraction temperature and sample/solvent ratio were tested and optimized for maximum yield of torilin using response surface methodology with Box-Behnken design (BBD). The optimal condition was obtained as a EtOAc concentration in MeOH of 31.8%, an extraction temperature at $30.3^{\circ}C$ and a sample/solvent ratio, 1000 mg/2 ml. The torilin yield under optimal conditions was found to be 9.9 mg/g dried samples, which were well-matched with the predicted value of 10.4 mg/g dried samples. These results will provide useful information about optimized extraction conditions for the development of torilin as cosmetic therapeutics to reduce skin hyperpigmentation.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.11
• /
• pp.1542-1550
• /
• 2014

Co-digesting molasses wastewater and sewage sludge was evaluated for hydrogen production by response surface methodology (RSM). Batch experiments in accordance with various dilution ratios (40- to 5-fold) and waste mixing composition ratios (100:0, 80:20, 60:40, 40:60, 20:80, and 0:100, on a volume basis) were conducted. Volatile solid (VS) concentration strongly affected the hydrogen production rate and yield compared with the waste mixing ratio. The specific hydrogen production rate was predicted to be optimal when the VS concentration ranged from 10 to 12 g/l at all the mixing ratios of molasses wastewater and sewage sludge. A hydrogen yield of over 50 ml $H_2/gVS_{removed}$ was obtained from mixed waste of 10% sewage sludge and 10 g/l VS (about 10-fold dilution ratio). The optimal chemical oxygen demand/total nitrogen ratio for co-digesting molasses wastewater and sewage sludge was between 250 and 300 with a hydrogen yield above 20 ml $H_2/gVS_{removed}$.

• Earthquakes and Structures
• /
• v.10 no.1
• /
• pp.1-23
• /
• 2016

Steel plate shear walls (SPSWs) have been shown to be efficient lateral force-resisting systems, which are increasingly used in new and retrofit construction. These structural systems are designed with either stiffened and stocky or unstiffened and slender web plates based on disparate structural and economical considerations. Based on some limited reported studies, on the other hand, employment of low yield point (LYP) steel infill plates with extremely low yield strength, and high ductility as well as elongation properties is found to facilitate the design and improve the structural behavior and seismic performance of the SPSW systems. On this basis, this paper reports system-level investigations on the seismic response assessment of multi-story SPSW frames under the action of earthquake ground motions. The effectiveness of the strip model in representing the behaviors of SPSWs with different buckling and yielding properties is primarily verified. Subsequently, the structural and seismic performances of several code-designed and retrofitted SPSW frames with conventional and LYP steel infill plates are investigated through detailed modal and nonlinear time-history analyses. Evaluation of various seismic response parameters including drift, acceleration, base shear and moment, column axial load, and web-plate ductility demands, demonstrates the capabilities of SPSW systems in improving the seismic performance of structures and reveals various advantages of use of LYP steel material in seismic design and retrofit of SPSW systems, in particular, application of LYP steel infill plates of double thickness in seismic retrofit of conventional steel and code-designed SPSW frames.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.1
• /
• pp.9-15
• /
• 2021

Sargassum serratifolium is a rich source of antioxidant meroterpenoids. The optimal extraction temperature and time for obtaining maximal antioxidant yield, antioxidant activity, and phenolic content from Sargassum serratifolium were determined using response surface methodology (RSM). The ranges of the independent variables for extraction temperature and time were 30-70℃ and 12-36 h, respectively. With increasing temperature and time, the yield increased significantly, while DPPH (2,2-dipheny-1-picrylhydrazyl) radical-scavenging activity and total phenolic content decreased significantly. The optimal extraction temperature and time obtained by RSM were 54℃ and 7 h, respectively, providing a yield of 8.2%, DPPH radical-scavenging activity of 60%, and total phenolic content of 163 mg GAE/g. The findings of this study provide useful information for the development of Sargassum serratifolium extraction processes for the food and cosmetic industries.

• Korean Journal of Pharmacognosy
• /
• v.53 no.4
• /
• pp.202-206
• /
• 2022

Salidroside is a major phenolic glycoside of Acer tegmentosum (Aceraceae) and known to be a hepatoprotective compound. Extraction conditions are one of the most important factors to save time and cost from an economic point of view. For this reason, this study was conducted to optimize the extraction condition for maximum yield of salidroside. For optimization, three extraction factors such as ethanol concentration (%), extraction temperature (℃), and solvent to material ratio (mg/mL) were tested and optimized for maximum yield of salidroside using response surface methodology (RSM). The optimal condition was obtained as an ethanol concentration of 53.4%, an extraction temperature at 67.11℃ and a solvent to material ratio (mg/mL), 195.55 mg/ml. The salidroside yield under optimal conditions was found to be 1.59 mg/g dried samples, which were well-matched with the predicted value of 1.56 mg/g dried samples. These results will provide useful information about optimized extraction conditions for the development of salidroside as hepatoprotective therapeutics.