• International Journal of Industrial Entomology and Biomaterials
• /
• 제19권1호
• /
• pp.165-169
• /
• 2009

A field experiment to evaluate the effect of application of different organic manures and inorganic fertilizers on growth, yield and quality of leaf was studied during 2004-05 has showed that, the application of 10 kg each of Azospirillum brasilense and Aspergillus awamori+20% each of recommended N through compost+green manure (Glyricidia maculata)+castor cake+vermicompost+Urea and remaining P and K through fertilizers ($T_{11}$) has recorded significantly higher leaf yield (250 g/ plant and 34.70 tonnes/ha/yr, respectively) with improvement in growth characters as compared to control. Leaf quality status was also improved in terms of N (3.19%), P (1.97%), K (1.28%), total soluble protein (8.39 mg/ml), total soluble sugars (14.40 mg/ml), secondary nutrients viz., Ca (3.00%), Mg (0.60%), S (0.35%) and micronutrients viz., Cu (0.410 ppm), Mn (0.454 ppm) and Zn (0.112 ppm) contents. The mulberry grown with 20 tonnes of compost+300:120:120 Kg of NPK/ha/year through fertilizer ranked second for growth and foliar constituents.

• Journal of Microbiology
• /
• 제40권1호
• /
• pp.82-85
• /
• 2002

The aerobic batch growth of Issatchenkia orientalis DY252 with glucose and fructose medium was investigated at 32$\^{C}$ and pH 5.0. Aerobic ethanol production was evident with yeast I, orientalis. A diauxic lag of about 1 h between growth on glucose and growth on ethanol during batch culture was observed. However, no diauxic growth occurred with fructose. As the incubation temperature was increased from 32 to 39$\^{C}$, viability at the end of each batch culture declined significantly, from 93 to 43%, Unlike the effect of temperature, viability was not greatly affected by incubation pH, and cell yield values in a range of 0.45-0.48 were obtained. In order to overcome overflow metabolism, a fedbatch culture under glucose limitation was carried out. Compared with aerobic batch culture, about 10% improvement in cell yield was achieved with a fed-batch culture in optimal conditions.

• 한국균학회지
• /
• 제20권1호
• /
• pp.77-82
• /
• 1992

자실체 생장을 위한 액체 정치 배양에서 탄소원, 질소원, pH의 효과를 검출한 결과 dextrin, aspartic acid, pH 4.0에서 각각 가장높은 건물중을 보였으며, 0.8% triacylglycerol 첨가시 자실체 생장이 촉진되었다. 고체배지 사용시 포플라, 백양나무, 참나무 톱밥 그리고 coffee waste 중 coffee waste에서 가장높은 자실체 건물중을 얻었으며 0.1% tannic acid의 첨가시 자실체 및 균사체 생장에 좋은 결과를 얻었다.

• Mycobiology
• /
• 제39권1호
• /
• pp.20-25
• /
• 2011

Spores of Aspergillus sp. SU14 were treated repeatedly and sequentially with $Co^{60}$ ${\gamma}$-rays, ultraviolet irradiation, and N-methyl-N'-nitro-N-nitrosoguanidine. One selected mutant strain, Aspergillus sp. SU14-M15, produced cellulase in a yield 2.2-fold exceeding that of the wild type. Optimal conditions for the production of cellulase by the mutant fungal strain using solid-state fermentation were examined. The medium consisted of wheat-bran supplemented with 1% (w/w) urea or $NH_4Cl$, 1% (w/w) rice starch, 2.5 mM $MgCl_2$, and 0.05% (v/w) Tween 80. Optimal moisture content and initial pH was 50% (v/w) and 3.5, respectively, and optimal aeration area was 3/100 (inoculated wheat bran/container). The medium was inoculated with 25% 48 hr seeding culture and fermented at $35^{\circ}C$ for 3 days. The resulting cellulase yield was 8.5-fold more than that of the wild type strain grown on the basal wheat bran medium.

• 한국기계가공학회지
• /
• 제19권2호
• /
• pp.81-88
• /
• 2020

The damping hinge of a built-in refrigerator was examined in terms of its stress and fatigue life. Analysis of the initial design showed that stress concentration occurred at the concave surface of the hinge lever, which was broken during the door opening-and-closing endurance test of the prototype. The maximum von Mises stress at this location exceeded the yield strength. In addition, Goodman fatigue analysis of the initial design showed that the fatigue life at this location was consistent with the failure observed during the endurance test. Based on these results, an improved design for the damping hinge was derived. Analysis of this improved design showed that the stress concentration in the hinge lever of the initial design was eliminated. In this case, the maximum stress occurred at the position where the hinge lever was in contact with the door stopping pin, and the maximum von Mises stress was smaller than the yield strength. Goodman fatigue analysis of the improved design indicated that the fatigue life of the entire damping hinge was infinite. It was therefore concluded that the improved design does not suffer from fatigue damage during the endurance test.

• Nuclear Medicine and Molecular Imaging
• /
• 제43권1호
• /
• pp.1-9
• /
• 2009

As many new drug substances contained various aromatic rings and fluorine attached to an electron rich aromatic ring or on the meta-position, a strategy towards improvement in aromatic fluorination of these compounds is highly desirable. The introduction of fluorine-18 onto aromatic rings showed in the limited condition containing electron withdrawing group (EWG) on the para- or ortho-position to get reasonable radiochemical yield so far. No-carrier added (NCA) [$^{18}F$]fluoroarene syntheses by iodonium salts recently reported that has the potential to greatly increase the yield in systems or positions that normally not reactive enough to give sufficient yields in simple model reaction. This review describes the methodological approach towards effective aromatic fluorination by diaryliodonium salts and future prospects in an application of novel PET radiotracer.

• 한국작물학회지
• /
• 제26권3호
• /
• pp.273-277
• /
• 1981

향끽미품종인 ST375-4를 공시하여 수확기를 앞당기고 노력을 절멸하며 수량과 품질을 향상시키는 재배법을 구명코자 한 구덩이에 5주를 이주하여 개량 Mulching하는 1혈다주 개량Mulching, 한 구덩이에 1주를 이주하는 일반 Mulching 및 무피복재배로 실시한 결과를 요약하면 다음과 같다. 1. 1혈다주 개량 Mulching 재배는 무피복재배구 보다 수확기가 14일 앞당겨졌다. 2. 1혈다주 개량Mulching재배는 이식노동력이 무피복재배보다 44.9% 절감되었다. 3. 1혈다주 개량 Mulching 재배시 엽면상체조도는 무피복재배와 차가 없었다. 4. 1혈다주 개량 Mulching 재배는 무피복재배에 비해 수량 28.7%, kg 당가격가 15.0%가 향상되었다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.13-13
• /
• 2017

By the progress of genome sequencing, infrastructures for marker-assisted breeding (MAB) of rice came to be established. Fine mapping and gene isolation have been conducted using the breeding materials derived from natural variations and artificial mutants. Such genetic analysis by the genome-wide dense markers provided us the knowledge about the many genes controlling important traits. We identified several genes or quantitative trait loci (QTL) for heading date, blast resistance, eating quality, high-temperature stress tolerance, and so on. NILs of each gene controlling heading date contribute to elongate the rice harvest period. Determination of precise gene location of blast resistance gene pi21, allowed us to overcome linkage drag, co-introduction of undesirable eating quality. We could also breed the first practical rice cultivar in Japan with a brown planthopper resistance gene bph11 in the genetic back-ground of an elite cultivar. Discovery of major and minor QTLs for good eating quality allowed us to fine-tune of eating quality according to the rice planting area or usage of rice grain. Many rice cultivars have bred efficiently by MAB for several traits, or by marker-assisted backcross breeding through chromosome segment substitution lines (CSSLs) using genetically diverse accessions. We are also systematically supporting the crop breeding of other sectors by MAB or by providing resources such as CSSLs. It is possible to pyramid many genes for important traits by using MAB, but is still difficult to improve the yielding ability. We are performing a Genomic Selection (GS) for improvement of rice biomass and grain yield. We are also trying to apply the genome editing technology for high yield rice breeding.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.45-52
• /
• 2004

Continuing pressure for the weight reduction of vehicles and improvement of collision safety is driving the development of new high strength steel with excellent formability. The formable high strength steels which have excellent drawability have been developed and applied to the complicated inner panels. Although BH steel have mainly occupied the material market for outer panels, it is challenged by DP steel which have low yield strength and good bake hardenability. The advanced high strength steel, TRIP steels and DP steels which have excellent formability are new alternatives to conventional HSLA steel for structural parts such as members and pillars. HSLA steels also have been used for automotive bumper reinforcements due to their high yield ratio. Higher grade complex phase steel(CP) were developed for bumper reinforcements by addition of precipitation hardening to transformation strengthened steel. The usage of the advanced high strength steel ale increasing and will become the main material in structural parts near future. This paper describes the features of newly developed high strength cold rolled steels for automobiles.

• 한국세라믹학회지
• /
• 제48권2호
• /
• pp.141-146
• /
• 2011

Successful coating of high quality glassy carbon is introduced by applying high pressure during the curing process of dip-coated phenol resin on graphite. The dependence of the applied pressure on the quality of the glassy carbon layer has not been reported so far. Pressure was changed from 0 to 400 psi during curing at $200^{\circ}C$. After carbonized at $1100^{\circ}C$ in inert atmosphere for the 400 psicured sample, as a promising result, a thick (~ 3 mm) and smooth glassy carbon layer could be obtained without any breakage, and the yield of carbonization was remarkably increased. It is believed that the cross-linking of resins results in decreasing volatile contents and, thus, increasing the yield of the glassy carbon. The origin of the improvement is discussed on the basis of several analytical results including FE-SEM, FT-IT and Raman spectrum.