• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2697-2701
• /
• 2012

The yield of OTP devices using anti-fuse MOS capacitor have been affected by the input resistance, the size of the pass transistor and the read transistor, and the readout voltage of programed cell. To investigate the element which gives an effect to yield, we analyze the full map data of the resistance characterization of OTP device and those data in a various experimental condition. As a result, we got the optimum conditions which is necessary to the yield improvement. The optimum conditions are as follows: Input resistance is 50 ohms, the channel length of pass transistor is 10um, read voltage is 2.8 volt, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.1
• /
• pp.1-3
• /
• 1999

This study was carried out to determine the effects on rice growth, yields and soil improvement under the different nitrogen levels in machine-transplanted rice after plowing at the fruiting stage of milk vetch. The fresh weight of milk vetch at plowing time was 20.95 ton/ha. In dry weight, T-N and C/N were 1.58%, 21.8%, respectively. Organic matter, total nitrogen and exchangeable calcium of soil after the experiment in the plot of milk vetch were higher than those before the experiment. Leaf area and dry weight of rice plants at heading date increased as nitrogen level increased. The number of panicle and spikelets per $\textrm{m}^2$were not different except for the 110 kg/ha nitrogen level plot with milk vetch. Brown rice yield ranged from 5.45 to 6.08 ton/ha, in creasing with increased nitrogen level. So the yield increased by 1% at 77 kg/ha nitrogen level, 7% at 110 kg/ha nitrogen level plot with milk vetch compared with conventional level (rice straw 5.4 ton/ha and nitrogen 110 kg/ha).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.1
• /
• pp.6-10
• /
• 1998

This study was conducted to obtain basic information on the development of new triticale cultivars with good quality and high productivity for soiling feed. Twelve cultivars introduced from Poland, Canada and two cultivars developed in Korea were planted in the experimental field at Ansong National University in 1995. Major growth traits and nutrient components for feed were measured and analyzed using principal component analysis and average linkage cluster analysis. 'Prego', 'Prag 46/3', and 'Clercal' were relatively high in forage yield. Most of forage nutrient contents except cellulose were higher in Prego, Clercal, and 'Cumulus' than other cultivars. Results of principal component analysis on 11 traits including forage yield and nutrient contents showed that 72.59% of total variation were explained by the first and second principal components. The Z$_1$ had high correlation with the contents of forage nutrient components and Z$_2$ with plant height, fresh, and dry weight. Fourteen cultivars were classified into 7 groups by multivariate analysis. Clercal and Prego in Group I could be useful source for the improvement of triticale as an important forage crop because they exhibited high productivity as well as high contents of nutrient components for feed.

• Journal of Bio-Environment Control
• /
• v.10 no.2
• /
• pp.101-105
• /
• 2001

Plant roots are affected by the root zone environment rather than substrate material itself. It is important to provide a suitable environment for the roots by amending the substrate and adjusting supply of the nutrient solution. In an expanded rice hull substrates, 1.5 L nutrient solution was supplied on each day at different frequency. In rice hull substrate, plant growth and yield were the greatest in the treatment where a 1.5L nutrient solution was supplied as 24 equal aliquots, wheres in perlite substrate plant growth and yield were the greatest in the treatment with 16 aliquots. Nitrogen deficiency symptoms caused by early decomposition of rice hulls by microorganisms was recovered by increasing solution EC from 1.7 to EC 2.0 dS.m$^{-1}$ for 25 days after planting. Plant growth and yield increased in the treatment of Ec 3.0 dS.m$^{-1}$ , but the cause for this increase is not clear.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.8 no.5
• /
• pp.269-278
• /
• 2003

Gibberellic acid (GA$_3$) is a commercially important plant growth hormone, which is gaining much more attention all over the world due to its effective use in agriculture and brewing industry. Industrially it is produced by submerged fermentation technique using Ascomycetous fungus Gibberella fujikuroi. Solid state and immobilized cell fermentation techniques had also been developed as an alternative to obtain higher yield of GA$_3$. This review summarizes the problems of GA$_3$ fermentation such as production of co-secondary metabolites along with GA$_3$, substrate inhibition and degradation of GA$_3$ to biologically inert compound gibberellenic acid, which limits the yield of GA$_3$ in the fermentation medium. These problems can be overcome by various bioprocessing strategies e.g. two - stage and fed batch cultivation processes. Further research on bioreactor operation strategies such as continuous and / or extractive fermentation with or without cell recycle / retention system need to be investigated for improvement in yield and productivity. Down stream processing for GA$_3$ isolation is also a challenge and procedures available for the same have been critically evaluated.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.3
• /
• pp.127-136
• /
• 1996

The purpose of this study is to provide with information for the water resources development and management in stream management planning, such as information on the sediment trensport, design of dam and water facilities, river improvement and flood plains management. The major results obtained from the field measurement and analysis of the watershed characteristics, hydraulic and sediment characteristics are as follows ; 1. The rating curve formulas obtained from the analysis of the hydraulic characteristics data collected are ; Q-=110.563 $(H-0.474)^2$ for 0.7m$(H-0.146)^2$ for 0.4m$Sr=aX{^2} {_1} X^{c}{_2}$, in the experimental watershed.

• KSBB Journal
• /
• v.10 no.4
• /
• pp.370-373
• /
• 1995

The major by-products in ethanol fermentation by Saccharomyces cerevisiae were glycerol, acetaldehyde, acetic acid, lactic acid, and formic acid. The effects of these by-products on the cell growth and ethanol production were studied. By adding acetaldehyde or acetic acid in the fermentation broth, the cell growth decreased while the ethanol production increased. But glycerol and lactic acid had nearly no effects on the cell growth and the ethanol production. Acetic acid and acetaldehyde inhibited the cell growth by diminishing the growth rate as well as by prolonging the lag phase. The ethanol yield increased with the elevation of concentrations of acetic acid and acetaldehyde in the fermentation broth. The maximum ethanol yield was obtained for $3g/\ell$ acetic acid and $2g/\ell$ acetaldehyde, respectively.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2214-2216
• /
• 2005

This paper is researched discharge and ozone generation characteristics of ozonizer using $Al_2O_3$ Ceramic dielectric. The discharge characteristics with variation of the discharge electrode area is studied. The characteristics of ozone concentration. ozone generation and ozone yield were measured to discharge power, discharge electrode area and supplied gas flux for oxygen and air. The solubility of ozone for water concentrations and ozone generations proportional to discharge power and discharge electrode area. Ozone yield has slowly increase with Increasing discharge power at high flow-rate. As the result, the maximum values of ozone characteristics ozone generation and ozone yield, can be obtained 5817[ppm] and 36[g/kWh]. We make enough the ozone concentration as the air in the home. An electric discharge electrode area is apt to shrink gradually into a miniaturization trend of the ozonizer but the enlargement of the occurrence flight of the electric discharge area gives the characteristic enhance the aid in the identity condition through the structure improvement.

• Journal of Animal Science and Technology
• /
• v.59 no.2
• /
• pp.3.1-3.7
• /
• 2017

Background: The modelling of lactation curve provides guidelines in formulating farm managerial practices in dairy cows. The aim of the present study was to determine the suitable non-linear model which most accurately fitted to lactation curves of five lactations in 134 Gir crossbred cows reared in Research-CumDevelopment Project (RCDP) on Cattle farm, MPKV (Maharashtra). Four models viz. gamma-type function, quadratic model, mixed log function and Wilmink model were fitted to each lactation separately and then compared on the basis of goodness of fit measures viz. adjusted $R^2$, root mean square error (RMSE), Akaike's Informaion Criteria (AIC) and Bayesian Information Criteria (BIC). Results: In general, highest milk yield was observed in fourth lactation whereas it was lowest in first lactation. Among the models investigated, mixed log function and gamma-type function provided best fit of the lactation curve of first and remaining lactations, respectively. Quadratic model gave least fit to lactation curve in almost all lactations. Peak yield was observed as highest and lowest in fourth and first lactation, respectively. Further, first lactation showed highest persistency but relatively higher time to achieve peak yield than other lactations. Conclusion: Lactation curve modelling using gamma-type function may be helpful to setting the management strategies at farm level, however, modelling must be optimized regularly before implementing them to enhance productivity in Gir crossbred cows.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1725-1728
• /
• 2009

This research developed process control device and FGV pattern generating device essential for full gate visual inspection to improve process so that defect detection capability may be maximized in specified environment. The devices developed in this research, which can be swiftly replaced in case loss or error occurs, are anticipated to improve module yield as well as maintain tact loss near '0'. In addition, as a result of mounting H/W and S/W system to control detailed operation sequence in production line and executing performance check and verification, detection rates were 98.1% and 99.1% respectively for pixel defect by tact and line defect, and yield of the entire module process including gate and visual level test increased up to 98.3%.