• Journal of Ginseng Research
• /
• 제28권4호
• /
• pp.196-200
• /
• 2004

전 생육기간동안 해가림내의 투광율을 약$8{\%}$로 고정한 대조구와, 생육시기별로 투광율을 $6{\%}$와 $18{\%}$로 조절한 투광량 조절구의 생육시기별 근 개체중 변화, 근 수량, 수삼 및 홍삼품질, 조 saponin 함량 차이를 조사한 결과는 다음과 같다. 6년근시 생육시기별 근 개체중 변화를 조사한 결과 생육시기에 따른 광량조절구가 대조구에 비해 생육후기에 $26{\%}$정도 증가되는 효과를 나타내었다. 그리고 10a당 근 수량은 광량조절구가 대조구에 비해 $40{\%}$정도 증수되었고, 수삼품질은 광량조절구가 1,2등급 비율이 $50.3{\%}$로 대조구의 $12.9{\%}$에 비해 현저히 증가되는 효과를 얻었다. 또한 생육시기별 근 비중을 조사한 결과 광량조절구가 대조구에 비해 4,6년근시 모두 전엽기, 생육중기 및 후기의 근 동체 비중이 유의성 있게 증가되었다. 홍삼품질에 있어서 고급홍삼인 천지삼 생출율은 광량조절구가 $46.4{\%}$로 대조구의 $8.0{\%}$에비해 5배 이상 증가되는 것으로 나타났고, 조 saponin함량에 있어서도 광량조절구가 대조구에 비해 증가되는 경향을 보였다. 이상의 결과를 종합하면 고품질 안전 다수확 재배를 위해서는 저온기(생육초기 및 후기)에 투광율을 증가시키고, 고온기(생육중기)에 투광율을 감소하여 근 비대 및 수삼품질을 향상시키기 위해서 인삼 생육시기별로 투광량을 조절하는 것이 필요하다.

• 한국수정란이식학회지
• /
• 제11권3호
• /
• pp.249-258
• /
• 1996

To improve the efficiency of in vitro production of embryos with follicular oocytes in Korean Native cows, the recovery rates, in vitro maturation, fertilization and development, and the time required for collecting and processing oocytes by aspiration with or without slicing were evaluated comparatively. The ovaries were obtained from a local abattoir and placed in physiological saline at 25~28$^{\circ}C$ and brought to the laboratory within 3 hrs. The oocytes were collected by aspiration of follicles(2~6mm) with or without slicing ovaries after aspiration, and classified into Grade I, Grade II, Denuded, Expanded oocytes by the morphology of cumulus cells attached and the homogeneity of cytoplasmic granules. Also the time required for each step of collecting and processing oocytes were measured. The cumulus cells were removed in some Grade I oocytes to measure their size and nuclear configuration before and after in vitro maturation. The Grade I oocytes were matured in vitro(IVM) for 24 hrs. in TGM-199 supplemented with 35$\mu$g /ml FSH, 10$\mu$g /ml LH, 1 $\mu$g /ml at 39$^{\circ}C$ under 5% C02 in air. They were fertilized in vitro(IVF) by epididymal spermatozoa treated with heparin for 24hrs. and then the zygotes were cocultured in vitro (IVC) with bovine oviductal epithelial cells for 10 days. The results obtained were as follows: The number of oocytes recovered per ovary was averaged 6.6 by aspiration and 11.2 by slicing post aspiration, which summed to 17.8. The number of Grade I oocytes recovered per ovary was averaged 3.1 by aspiration and 3.6 by slicing, which summed to 6.7. The percentage of Grade I to total oocytes recovered was significantly(P<0.05) higher as 48.0 % in aspiration than 31.6% in slicing post aspiration. The time requlred for recovering a Grade I oocyte by aspiration and slicing was 1.1 and 2.5 min, respectively. The mean diameter of Grade I oocytes by aspiration and slicing was similar as 148.7 and 151.5$\mu$m, respectively. The percentage of Metaphase II stage oocytes after IVM for 24 hours was significantly (P

• 한국잠사곤충학회지
• /
• 제25권2호
• /
• pp.65-68
• /
• 1984

최근, 우리나라가 외국산견을 수입하여 기계검정한 성적을 비교 분석한바 다음과 같은 결과를 얻었다. 1) 원료견의 성상이 고르지 못한데 특히 선제견비율과 건견생사량비율에서 심한 변동을 나타내었다. 2) 상위등급의 원료견을 수입하지 못하고 D,E격의 하위등급견이 수입되었으며 가격이 높은 편이다. 3) 상위격의 원료견을 수입하는 것이 향후 우러나라 견제품의 고급화를 피하리라고 본다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 제7회 압연 심포지엄
• /
• pp.93-96
• /
• 2009

The high grade thick plate is in great demand in the ship building industry and the construction industry. The main problems to produce the high grade plate are residual stress and flatness of plate. In the previous research, Finite Element Analysis(FEA) was conducted for cold roller leveler to understand the behaviors of cold roller leveler under different conditions of thickness, intermesh, and yield stress. In this study, a numerical model of roller leveler is developed and the calculated results of this model are compared with the FEA results to show the validity of the numerical model. The optimal leveling conditions to improve flatness of plate are suggested using this numerical model.

• 대한세포병리학회지
• /
• 제17권1호
• /
• pp.1-17
• /
• 2006

Urine cytology is the most useful technique for detecting either primary or recurrent neoplasms in the urinary tract. Although urine cytology is the traditional method of detecting these neoplasms, its diagnostic accuracy has been underevaluated because of low sensitivity. The cytologic interpretation of urinary samples is not an easy task, even with some expertise in this area, for many reasons. In low-grade urothelial carcinoma, no reliable or reproducible diagnostic cytologic criteria can be provided because of the lack of obvious cytologic features of malignancy, which is one of the main factors lowering its diagnostic accuracy. Many diagnostic markers have been developed recently to enhance its diagnostic yield, but the results have not been satisfactory. However, urine cytology plays a role in detecting high-grade urothelial carcinoma or its precursor lesions. It still shows higher specificity than any of the newly developed urine markers. Understanding the nature of urine samples and the nature of neoplasms of the urinary tract, recognizing their cytologic features fully, and using cytologic findings under appropriate conditions in conjunction with a detailed clinical history would make urine cytology a very valuable diagnostic tool.

• 전기학회논문지P
• /
• 제50권3호
• /
• pp.125-129
• /
• 2001

ln this paper, a ozone generator using superimposition of silent discharge has been designed and manufactured. This type ozone generator is equipped with three electrodes and two gaps. Ozone is generated by superimposition of silent discharge, which is respectively come from two gaps. The maximum values of ozone concentration, ozone generation flow and ozone energy field were obtained 4,750[ppm], 2.37[g/h], 102.3[g/kWh]. Also, the result of reaction of 1,8921ppm] ozone and the sampling water from the lake, the water quality was improved from IV grade to In grade, and obtained 100[%] sterilization rate of Escherichia coli within 5.0(min).

• Journal of the Korean Wood Science and Technology
• /
• 제31권6호
• /
• pp.22-30
• /
• 2003

This study was performed to obtain the basic data for high quality timber production and efficient utilization by investigating the effect of pruning on timber quality of domestic plantation-grown Korean pine (Pinus koraiensis Sieb. et Zucc.). The results were summarized as follows:Dead knots (unsound knots) in the pruned logs occurred more at upper parts when compared with in non-pruned ones. The numbers of knots on surface in heavily pruned trees were less than those in non-pruned trees, but there was no significant difference in moderately pruned trees. The required period to reveal clear timber surface without defects after pruning increased proportionally with the increase of knot diameter. The yield of clear lumber production increased by about 10% after 14 years from moderate pruning. The quality grade of log improved with more pruning practices. Knots appeared the most important factor in lowering the log grades.

• 한국축산식품학회지
• /
• 제29권5호
• /
• pp.550-556
• /
• 2009

Two experiments were carried out to investigate the relationship of slaughter age and carcass traits of Hanwoo cattle. A total number of 11,284 heads of cattle (4,624 bulls, 6,120 steers, and 540 females) were used in the experiment (Exp.) 1. In the Exp. 2, 3,887 heads of steers slaughtered at age of 24-36 mon were used. After 24 h post-slaughter chilling, the carcasses were weighed and evaluated by an official grader of carcass traits according to the Korean carcass grading standard. Backfat thickness was the main variable in yield index and grade whereas marbling score was the main variable in carcass quality grade. Meat color was an important factor affecting carcass quality grade of bulls; fat color was an important factor affecting those of steers and females; and maturity was an important factor affecting that of females. After 24-mon-old, extension of slaughter age did not automatically increase the quantity and quality of meat. However, 29 mon of age can be regarded as the optimum time to slaughter steers to attain the highest take home money for farmers.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.395-399
• /
• 2004

Four microalloyed steels containing B were investigated in terms of hardenability, mechanical properties and microstructure depending upon the cooling rates in order to develop the steel grade for the cold forged fasners. The alloy with the largest DI value among 4 alloys, which contains $0.12\%\;C,\;1.54\%\;Mn,\;0.65\%\;Cr,\;0.11\%V,\;0.040\%Ti\;and\;0.0033\%B$, showed the larest shift to the right hand side in the TTT diagram, implying the wide allowable cooling rate range subsequent to hot rolling in long bar processing, Mechanical tests indicated that yield strength are dependent upon the DI value in water quenched specimens but other properties showed almost the same values. In the same grade of steel, the increase in cooling rates causes the decrease in elongation but the increase in strength, reduction of area and Charpy impact values. Microstructural examination in steel grade with the larest DI values revealed martensitic structure In the water quenched state, a mixture of martensite and bainite in the oil quenched, and ferrite + pearlite in the air cooled and the forced air cooled but the latter showed finer microstructure.

• 대한가정학회지
• /
• 제26권4호
• /
• pp.43-52
• /
• 1988

This study is intended to reveal the nutritional realities of school children due to their box lunch. The samples were chosen at random from the third grade to the sixth grade children in an elementary school in Seoul : 122 male and 111 female children, 233 children in all. among the subjects, 44.3% have a family of four, 34.3% have over 500,000 won of family income a month, and 44.3% of their mothers graduated from a high school. The average intake of calories is 573.6 Kcal, and the ratios of the calory intakes to the recommended amounts are 90.6% in the third grade children and from the fourth grade to the sixth grade, 79.5% in the male children and 82.9% in the female children. The average consumption of protein is 21.0g and the ratio of animal protein is 41.4%. the ratio of energy yield nutrients is 67.4% : 14.5 : 18.0 (carbohydrate : protein " fat). Considering the recommended amounts, the intake of protein is enough; the consumption of vit, A, thiamine, niacin are appropriate;and the intake of calories, Riboflabin and ascorbic acid, calcium, iron are deficient. Even though there is no significant difference between the socioeconomic factors (the standard of education of the subjects' mothers and family income0 and the intakes of calories and protein, there is a tendency that the consumption of protein intake si more abundant in the middle class than in any other class. The subjects' distribution of the physical growth index, is as follows; A (6.9%), B(19.3%), C(48.5%), D(13.7%) and E (11.6%). As the subjects' intake of calcium increases, the weight shows significant improvement (p<0.001). As the consumption of calories increases, the physical development shows significant improvement (p<0.05), and the weight shows significant increase (p<0.001).