• 한국약용작물학회지
• /
• 제14권3호
• /
• pp.183-187
• /
• 2006

고려인삼과 미국삼을 공시하여 Panax속 종간의 원료수삼 및 홍삼 등급에 기초하여 품질을 평가분석하였다. 1. 미국삼은 고려인삼에 비하여 근중이 적고 부정형 지근이 동체에서 많이 발생하는 관계로 체형이 불량하였다. 2. 홍삼수율은 고려인삼이 30.4%,미국삼이 33.8%로 미국삼이 높았고 홍삼의 본삼수율은 고려인삼이 80.4%, 미국삼이 72.2로 고려인삼이 높았다. 3. 원료수삼 1등급은 고려인삼이 미국삼에 비하여 2배정도 많았으나 2등급은 미국삼이 고려인삼에 비하여 많았다. 한편 고급홍삼인 천지삼율은 고려인삼이 미국삼에 비하여 높았다. 4. 홍삼 품질의 저하 원인은 고려인삼 미국삼 모두 내공과 내백 발생에 있었고 특히 미국삼은 내공에 비해 내백이 3배 가량 많이 발생하였다. 5. 홍삼의 지별 분포에서 고려인삼은 20지 이상의 대편급이 많았고 미국삼은 20지 이하의 소편급이 많았다.

• 한국강구조학회 논문집
• /
• 제26권5호
• /
• pp.473-483
• /
• 2014

건축구조기준에 따라 HSA800 강재의 합성기둥 적용시에는 실험 또는 해석적 방법을 통하여 적용의 타당성을 검증해야 한다. 이에 본 연구에서는 합성기둥으로 주로 사용되는 H형강 매입형, 각형강관 및 원형강관 충전형 합성기둥 단면을 대상으로 HSA800 강재를 적용한 단주압축실험을 실시하고, 이를 통하여 축방향 내력 및 건축구조기준의 합성기둥 설계압축강도 설계식 적용의 타당성을 평가하였다. 실험결과 매입형 합성기둥의 경우 HSA800 강재의 설계기준항복강도를 저감없이 사용하기 위해서는 건축구조기준의 설계압축강도 산정식의 조정이 필요한 것으로 나타났으며, 이를 위해 띠철근 간격 조정 및 콘크리트의 유효단면적 사용을 제안하였다. 충전형 합성기둥의 경우에는 각형, 원형충전강관 기둥 모두 별도의 강도 저감이나 설계압축강도 산정식의 조정 없이 사용이 가능할 것으로 판단된다.

• 한국미생물·생명공학회지
• /
• 제51권4호
• /
• pp.449-456
• /
• 2023

Sugar or dextrose increases the cost of production of xanthan gum by Xanthomonas campestris. Brewers' Spent Grain (BSG) was chosen as a source of fermentable sugars. BSG is a significant industrial by-product generated in large quantities from the breweries. Primarily used as animal feed due to its high fiber and protein content, BSG holds great potential as an economically and ecologically sustainable substrate for fermenting biomolecules. This study explores BSG's potential as a cost-effective carbon source for producing xanthan, utilizing Xanthomonas campestris NCIM 2961. An aqueous extract was prepared from BSG and inoculated with the bacterium under standard fermentation conditions. After fermentation, xanthan gum was purified using a standard protocol. The xanthan yield from BSG media was compared to that from MGYP media (control). The fermentation parameters, including pH, temperature, agitation and duration were optimized for maximum xanthan gum yield by varying them at different levels. Following fermentation, the xanthan gum was purified from the broth by alcoholic precipitation and then dried. The weight of the dried gum was measured. The obtained xanthan from BSG under standard conditions and commercial food-grade xanthan were characterized using FTIR. The highest xanthan yields were achieved at 32 ℃, pH 6.0, and 72 h of fermentation at 200 rpm using BSG media. The FTIR spectra of xanthan from BSG media closely resembled that of commercial food-grade xanthan. The results confirm the potential of BSG as a cost-effective alternative carbon source for xanthan production, thereby reducing production costs and solid waste.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권5호
• /
• pp.716-722
• /
• 2005

Carcass weight and backfat thickness are primary yield grading factors. Insulin-like growth factor (IGF)-I/-II, transforming growth factor $\beta$1 (TGF-$\beta$1), and epidermal growth factor (EGF) regulate the proliferation and differentiation of cells including adipocytes. Also, interleukin (IL)-2/-6, cortisol, and dehydroepiandrosterone-sulfate (DHEA-S) are known to be related to muscle growth and fat depth. However, the relationships between endocrine factors and carcass grade have not been studied. Therefore, this study aimed to measure the concentrations of endocrine factors in serum and muscle, and to investigate the relationship of endocrine factors with carcass grade. A total of 60 crossbred gilts (Duroc${\times}$Yorkshire${\times}$Landrace) were used. Blood from the jugular vein was collected at antemortem (7 days before slaughter) and postmortem periods, and M. Longissimus was collected at 45 min and 24 h after slaughter. The concentrations of IGF-I/-II, EGF, TGF-$\beta$1, IL-2/-6, cortisol and DHEA-S were analyzed by radioimmunoassay (RIA) or enzyme-linked immunosorbent assay (ELISA). In general, IGF and EGF concentrations in serum and muscle of grade A carcasses were found to be higher than those of grade C carcasses at antemortem and postmortem periods, whereas the pattern of TGF-$\beta$1 concentration was reversed. In particular, the concentrations of muscle IGF-I (24 h postmortem) and serum TGF-$\beta$1 (antemortem) were significantly different between grades A and C (p<0.05). The present results indicate that serum and muscle growth factors affect carcass weight and backfat thickness, and indirectly suggest the possibility that carcass grade could be predicted by expression of serum and/or muscle growth factors.

• 한국초지조사료학회지
• /
• 제39권2호
• /
• pp.89-96
• /
• 2019

본 연구는 우리나라 초지보유농가의 초지실태를 조사하여 문제점과 그 원인을 제시하고자 3년간(2014~2016) 충청북도를 비롯하여 6개도(강원도, 경기도, 경상북도, 경상남도, 제주도 및 전라남도)의 106농가를 조사하였다. 초지조사는 초지법을 준수하여 다년생 목초 및 단년생 사료작물로 이용하고 있는 경우(초지법기준이용), 초지법을 준수하지 않고 있다고 판단한 경우(기타 이용) 및 농장주를 만나지 못하여 조사항목의 일부가 누락 또는 부정확하거나 농장주가 조사를 거부한 경우(조사미흡)로 구분하여 실시하였다. 조사농가 중 초지법기준이용 농가는 68농가(64.2 %)였으나, 기타이용 농가도 30농가(28.3 %)에 달하였다. 특히 이 중 타 용도(식물원, 골프장 및 돼지농장 등)로 이용하고 있는 농가도 8농가(26.7 %)를 포함하고 있어 불법이용을 방지하기 위하여 지자체의 보다 철저한 현장조사를 통한 취소 등의 강력한 행정조치가 요구된다. 또한, 조사미흡 8농가(7.5 %) 중 조사를 거부한 5농가(62.5 %)는 실정법을 위반하고 있을 가능성이 높다고 판단된다. 일선 행정기관에서 이용하는 초지등급은 생산량에 영향을 주는 요인(보파유무, 시비유무 및 토양의 pH와 유기물함량)에 영향을 받지 않았다. 이는 생산량을 기준으로 한 초지등급평가에 대한 근본적인 문제점을 시사하고 있다. 또한, 일선 행정기관에서 조사시기의 차이나 부실한 현장조사도 부정확한 초지등급의 또 다른 원인이라고 판단된다. 따라서 초지등급을 평가할 때에는 생산량 기준이 아닌 새로운 평가방법의 도입과 철저한 현장조사가 필요하다.

• 산업경영시스템학회지
• /
• 제22권50호
• /
• pp.105-125
• /
• 1999

The results of analysis on foreign exchange market, stock and financial market after January of 1997 are that foreign exchange market will be affected by stock and financial market volatility about 1999. This means that stock and financial market are more stable than foreign exchange market. This also is supported by ‘financial market forecast of 1999 in Daewoo Economic Research Institute’. After won/dollar (end of period) will be increasing in 1,430 at second quarter of 1999, this is to downward 1,200 fourth quarter of 1999. This is somewhat based on government's higher exchange rate policy. But, after yield of corporate bond is to 11.0% at first quarter of 1999, this will be stable to 10.2% at fourth quarter. During the first quarter of 1999, yield of corporate bond is to somewhat increasing through sovereign debt and public bonds, technical adjustment of interest rate. After this, yield of corporate bond will be stable according to stability of price, magnification of money supply, restucturing of firms. So, stock market is favorably affected by stability of financial market. But, the pension and fund of USA, i.e., long-term portfolio investment fund, are injected through international firm's management. It is included by openness of audit, fair market about foreign investors. Finally, Moody's strong rating on the won-denominated bonds suggest that Korea's sovereign debt ratings could be restored to an investment grade in the near future. It sequentially includes inflow of foreign portfolio investment fund, fall of won/dollar foreign exchange rate (appreciation of won) and stability of yield of corporate bond.

• Journal of Ginseng Research
• /
• 제22권4호
• /
• pp.244-251
• /
• 1998

KG101 was developed by the Korea Ginseng & Tobacco Research Institute. We reported about yield trials and local adaptability test. Growth characteristics and red ginseng quality of KG101 in local performance test can be summarized as follows. Aerial parts growth, stem and leaf, was similar about KG101 and Jakyungjong, 4-year old and 6-year old ginseng. Emergence rate of KG101 was higher than Jakyungjong in the 3 location of local performance test. Taproot diameter of KG101 was smaller than Jakyungjong and taproot shape of KG101 had fitted characteristics, radish type and human body type, to manufactured red ginseng. Raw ginseng grade, 1st and 2nd of KG101 was higher than Jakyungjong's. Chun, Jeesam ratio to manufacture of 2nd grade of raw ginseng of KG101 was 25%, Jakyungjong was 6-13% in 3 location of local performance test. Distribution of red ginseng weight of Jakyungiong was heavier than KG101 in 2 location, Kongju and Jungup, but KG101 was heavier than Jakyungjong in Ichon. Red ginseng quality of KG101 was better than Jakyungiong. Main degrade factor of red ginseng quality was inside cavity and inside white, was not different lines and location.

• Journal of Animal Science and Technology
• /
• 제59권3호
• /
• pp.6.1-6.6
• /
• 2017

Background: This study was aim to observe the effects of feeding mixed local hay (MH) consisted of 55% orchard grass (Dactylis glomerata L.), 35% tall fescue (Festuca arundinacea) and 10% red clover (Trifolium pratense) to Hanwoo steers on performance, carcass characteristics and meat quality (longissimus thoracis) compared with feeding imported timothy hay (TH) and local rice straw (RS). Results: Although no significant effects were found on animal performance and carcass yield grade, the carcasses of MH group had higher marbling score and quality grade than those of RS and TH group (P < 0.05). Therefore, higher fat content (P < 0.001), lower shear force and hardness value in the beef of MH group than that of other groups were observed. Furthermore, the beef of MH group had higher CIE $a^*$ value (redness) than that of other groups and feeding MH to Hanwoo steers lowered n-6 to n-3 fatty acids ratio in beef. Conclusions: Mixed hay provided benefits on meat quality and could be used for Hanwoo fattening program.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권1호
• /
• pp.123-135
• /
• 2001

Application of growth promoters by means of implantation or supplementation to the diets has been routine in the beef cattle industry of many countries for the better performance in growth and improvement of feed efficiency. Anabolic implants (zeranol, trenbolone acetate, and estradiol with testosterone or progesterone) have generated various positive effects. Zeranol implantation, in general, improved average daily gain (ADG), feed conversion (FC), dressing percentage (DP) and yield grade (YG) of cattle, and increased dry matter intake (DMI). Trenbolone acetate with or without estradiol also increased mean values of ADG and loin eye area (LEA) but reduced DMI and improved FC of cattle. Estradiol with testosterone or progesterone increased ADG and DMI. Anabolic implants, however, had minimal or negative effects on marbling or quality grade. The magnitude of the response to these anabolic implants in performance of beef cattle has varied depending on the type of implants, amount and duration of exposure, age of animals and combination of implants. Administration of bovine somatotropin improved ADG and FC, and decreased fat deposition. Ionophores improved FC in cattle from reduced DMI without great response to ADG. Supplementation of monensin and lasalocid reduced molar proportion of propionate. Monensin and lysocellin increased apparent absorption and retention of some minerals in cattle. Despite the improved cattle performance in growth and FC, results in beef quality from the application of the growth promoters appeared to vary or in conflict under a variety of environmental conditions.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.632-638
• /
• 2002

Electron beam (EB) and Gas tungsten arc (TIG) welds were performed on 12.7 mm thick Ti-6Al-4V plate (ASTM Titanium Grade 5). Charpy-V toughness and hardness, as well as, microstructure of the welds and penetration from the macrostructure were studied. It appears that by EB welding rather smaller $\beta$-grains than with TIG welding can be obtained. Next to the fusion line the $\beta$-grain size in the HAZ was 50 ${\mu}{\textrm}{m}$l while in the weld metal it was 150 ${\mu}{\textrm}{m}$. Charpy-V toughness of the EB weld metal was equal or even better to that of base metal, which shows that the $\alpha$-martensite per se is not particularly brittle if only the grain size is fine enough. This is similar to behavior of low carbon martensite in steel. The grain size was studied with light optical and scanning electron (SEM) microscopes. Thus for products, for products which can be manufactured automatically with very narrow fit, the EB welding of Ti-6Al-4V appears to yield satisfactory toughness without any complex post weld heat treatment. ill this study as in earlier studies the TIG welds gave lower toughness than that of the base material due to the higher heat input and slower cooling as compared to EB welding.