• Corrosion Science and Technology
• /
• v.5 no.5
• /
• pp.168-172
• /
• 2006

Alloy 600 having a superior resistance to a corrosion is used as a steam generator tubing in nuclear power plants. In spite of its high corrosion resistance, there are many tubings which experience corrosion problems such as a SCC under the high temperature and high pressure environments of nuclear power plants. The Alloy 600 tubing can be repaired by using a Ni electroplating having an excellent SCC resistance. In order to carry out a successful Ni electrodeposition inside a steam generator tubing, the effects of various parameters on the material properties of the electrodeposit should be elucidated. Hence this work deals with the effects of an applied current density, duty cycle($T_{on}/(T_{on}+T_{off})$) of a pulse current, bath temperature and solution pH on the material properties of Ni electrodeposit obtained from a Ni sulphamate bath by analyzing the current efficiency, potentiodynamic curve, hardness and stress-strain curve. Hardness, YS(yield strength) and TS(tensile strength) decreased whereas the elongation increased as the applied current density increased. This was thought to be by a concentration depletion at the interface of the electrodeposit/solution, and a fractional decrease of the hydrogen reduction reaction. As the duty cycle increased, the hardness, YS and TS decreased while the elongation increased. During an off time at a high duty cycle, the concentration depletion could not be recovered sufficiently enough to induce a coarse grain sized electrodeposit. With an increase of the solution temperature and pH, the YS and TS increased while the elongation decreased. The experimental results of the hardness and the stress-strain curves can be supplemented by the results of the potentiodynamic curve.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.4
• /
• pp.439-447
• /
• 1996

Monthly test day production for 12,020 records, were collected from six of the largest specialized dairy farms located in central region of the Kingdom of Saudi Arabia. The records described lactating cows in four parities and two seasons of calving. Monthly test day records were fitted using Wood's model $At{{^b}{_e}}^{-ct}$ with multiple and additive error term. Linear and non-linear regression models were used to find the estimates of the parameters necessary to draw the lactation curves. The shape of the lactation curves of different parities showed that third lactation has the heighest peak (43.08 kg) for linear regression model and (42.08 kg) for non-linear regression model. Fourth lactation has the lowest peak (24.00kg) for linear regression model and (25.64 kg) for non-linear regression models. Cows of second and third lactations reached the peak at 58 day for both linear and non-linear regression models. Cows of first lactation were more persistent and had late peak at 68 and 67 days for both models respectively. While, third lactation cows were lower persistent and had early peak at 58 day for both models. Cows calved at winter months have higher starting values (A), higher ascending slope (b) and higher decending slope (c). Least square means of milk yield of the first four parities and for overall data were 6,653, 7,659, 7,482, 6,988 and 7,614 kg respectively. The corresponding lactation period were 358, 367, 350, 363 and 364 days respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.5
• /
• pp.610-615
• /
• 2011

We examined the correlations between lactation curve shape, including persistency and changes in body condition score (BCS) during early-stage (0 to 30 days in milk (DIM)), nadir-stage (31 to 90 DIM), and late-stage (91 to 240 DIM) lactation in 191 first-lactation cows. Data used were first-parity BCS records, scored twice every month after calving, and daily milk yields. Individual lactation curves were depicted by the Wilmink function. Lactation persistency was defined as the difference in estimated milk yields between 240 DIM and 60 DIM. Changes in BCSs in the early and late stages were defined as linear regression coefficients. There were no significant correlations between traits for lactation curve shape and change in BCS in early-stage lactation. Peak yield and total milk yield were negatively correlated with BCSs in nadir- and late-stage lactation and with BCS change in late-stage lactation, suggesting that cows with high lactation yields had low body reserves and health status in mid- to late lactation and had delayed recovery of body reserves. Lactation persistency was positively correlated with change in BCS in late-stage lactation, suggesting that cows with high lactation persistency tended to be healthy and to recover their body reserves well in late lactation.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.4
• /
• pp.141-148
• /
• 2008

This study was conducted to investigate the photosynthetic responses of four Oak species (Quercus mongolica, Q. serrata, Q. acutissima and Q. variabilis) by shading treatment. We investigated light response curve, photosynthesis (A)-intercellular $CO_2$ concentration (Ci) curve, leaf growth and chlorophyll content at the level of 35, 55 and 75% shading treatments and under the full sunlight. In our results, Q. variabilis and Q. acutissima showed increased leaf growth, chlorophyll content and net apparent quantum yield but reduced chlorophyll a/b and carboxylation efficiency under the low light intensity. Therefore, light absorption and light utilization efficiency were improved under the low light intensity. Q. mongolica showed the similar responses that Q. variabilis and Q. acutissima showed, but net apparent quantum yield was reduced. The effects of shading treatment on Q. serrata were lower than those of other three species.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.3
• /
• pp.137-148
• /
• 2007

Using a strain-controlled rheometer [Rheometrics Dynamic Analyzer (RDA II)], the steady shear flow properties of a semi-solid ointment base (vaseline) have been measured over a wide range of shear rates at temperature range of $25{\sim}60^{\circ}C$. In this article, the steady shear flow properties (shear stress, steady shear viscosity and yield stress) were reported from the experimentally obtained data and the effects of shear rate as well as temperature on these properties were discussed in detail. In addition, several inelastic-viscoplastic flow models including a yield stress parameter were employed to make a quantitative evaluation of the steady shear flow behavior, and then the applicability of these models was examined by calculating the various material parameters (yield stress, consistency index and flow behavior index). Main findings obtained from this study can be summarized as follows : (1) At temperature range lower than $40^{\circ}C$, vaseline is regarded as a viscoplastic material having a finite magnitude of yield stress and its flow behavior beyond a yield stress shows a shear-thinning (or pseudo-plastic) feature, indicating a decrease in steady shear viscosity as an increase in shear rate. At this temperature range, the flow curve of vaseline has two inflection points and the first inflection point occurring at relatively lower shear rate corresponds to a static yield stress. The static yield stress of vaseline is decreased with increasing temperature and takes place at a lower shear rate, due to a progressive breakdown of three dimensional network structure. (2) At temperature range higher than $45^{\circ}C$, vaseline becomes a viscous liquid with no yield stress and its flow character exhibits a Newtonian behavior, demonstrating a constant steady shear viscosity regardless of an increase in shear rate. With increasing temperature, vaseline begins to show a Newtonian behavior at a lower shear rate range, indicating that the microcrystalline structure is completely destroyed due to a synergic effect of high temperature and shear deformation. (3) Over a whole range of temperatures tested, the Herschel-Bulkley, Mizrahi-Berk, and Heinz-Casson models are all applicable and have an almostly equivalent ability to quantitatively describe the steady shear flow behavior of vaseline, whereas the Bingham, Casson,and Vocadlo models do not give a good ability.

• Journal of Korean Society of Forest Science
• /
• v.96 no.3
• /
• pp.362-368
• /
• 2007

This study was conducted to estimate merchantable volume and yield per diameter (DBH) class of Pinus koraiensis and Larix kaempferi. Stem volume of trees in each diameter class was calculated using the existing equations for taper and height curve. Saw logs and pulpwood volume were then estimated from the stem volume in each diameter class. The final step was to estimate merchantable volume and yield from saw logs, assuming saw logs were used for lumber (boards or dimension products) production only. The results showed that the stem volume of Larix kaempferi was 23~38% higher than that of Pinus koraiensis at the same diameter classes. Both species were able to produce saw logs from the diameter class of 18 cm. Saw logs and pulpwood yield for both species rapidly increased due to the size limitation on small end diameter. This yield reached a maximum of 90% and 88% at 26 cm and 38cm diameter class, respectively, for Pinus koraiensis and Larix kaempferi. Lumber yield estimated for board products ranged from 23% to 56%. In the case of dimension products, Lumber yield became significantly smaller as saw logs were used for larger dimension products. These results can be used for calculating merchantable volume and economic value of trees, as well as determining final lumber products.

• The Korean Journal of Ecology
• /
• v.13 no.3
• /
• pp.191-202
• /
• 1990

For the maximun yield of the forest trees in the forest management, the growth of annual ring area of the major forest trees was analysed in the four areas in South Korea. The time to the maximum productivity and the optimum cutting time for the maximum yield were estimated. The growth curve of annual ring area showed sigmoid like that of other organisms. Only the growth coefficient among the areas between Fraxinus rhynchophylla and Pinus koraiensis represented significance (5% level). The growth coefficient among forest trees between Pinus densiflora and Abies holophylla, Larix kaempferi and Carpinus laxiflora, Larix kaempferi and Quercus mongolica, Larix kaempferi and Quercus serrata, Larix kaempferi and Pinus koraiensis, and Larix kaempferi and Abies holophylla represented significance (5% level). Among eight forest trees, the time to maximum productivity (tm) of Larix kaempferi was the earliest (21.4 year), and Abies holophylla was the latest (91.9 year). The optimum cutting time for the maximum yield (tc) of L. kaempferi was the earliest (29.4 year) and that of A, holophylla was the latest (122.2 year) of all communities. The optimum cutting time for the maximum yield was 1.33 times as late as the time to the maximum productivity. If the growth of annual ring area as the forest tree for wood is regarded, L. kaempferi and P. densiflora are thought to be more economical than A. holophylla and P. koraiensis.

• Journal of Korea Water Resources Association
• /
• v.42 no.9
• /
• pp.737-745
• /
• 2009

Field measured sediment yield from an experimental urbanized basin was compared with the predicted sediment yields with RUSLE (Revised Universal Soil Loss Equation), and MUSLE (Modified Universal Soil Loss Equation). The experimental basin is 3.1km2 in area and fifty six percent of the total area had been urbanized. The hydrological data have been measured with T/M at the outlet of the experimental basin. Runoff from the basin and rainfall depth of the basin were measured every minute. Bed load and suspended load were also measured for a given flow rate. Runoff rating curves and sediment rating curve were developed for the last three years. RUSLE showed scattered prediction results but the average of the prediction values was close to the measured one. Meanwhile, MUSLE showed linear correlation between the measured sediment yield and predicted one with high correlation coefficient. But MUSLE predicts high values than the real one. Therefore, adjustment is necessary to apply MUSLE in estimation of sediment yield from the experimental urbanized basin.

• Journal of the Korean Society of Tobacco Science
• /
• v.15 no.1
• /
• pp.75-89
• /
• 1993

Effect of the amount of fertilizer, plant density, and harvesting time on the production of tobacco leaf protein and fresh biomass was investigated. Flue-cured tobacco(M tabacum, L., cv. NC 82) seedlings were transplanted in the field dressed 200kg N per ha at 1$\times$105, 3$\times$105, 5$\times$105, 7$\times$105 plants per ha, and were harvested at the time when 6 and 10 weeks after transplanting, respectively. Harvest at 10 weeks after transplanting increased greatly number of leaves per plant and fresh weight of a plant, Precentage of senescent leaf weight, but significantly decreased fresh weight of a leaf and total protein contents g-1 fresh weight of leaf and stalk over the amount obtained from the harvest at 6 weeks after transplanting. Also, fresh leaf numbers of a plant, fresh weight of a leaf and of a plant, and total protein contents g-1 fresh weight of biomass were more decreased, but percentage of senescent leaf weight were remarkably increased under higher plant density. Therefore, it was seemed that harvesting at 6 weeks after transplanting under 1$\times$105 plant density per ha is more effective for producing higher yield of biomass and protein per plant than 10 weeks harvesting with 7$\times$105 population per ha. A trend was observed that biomass and protein yields per ha are positively correlated with plant population. Biomass yield per ha was the greatest at 7$\times$105 density(80.5t), but the peak of protein yield was at the near of 5$\times$105 population(2454kg as total protein) per ha on the regression curve. It was assumed that if tobacco plants are transplanted under 5$\times$105 plant density at the mid of May, and thereafter harvest at 6 weeks repeatedly during the growing season, it is possible to harvest 2~3 times per year, and to yield more 6.024kg of protein and over 140me1ric tons of fresh biomass ha 1 year 1 statistically in the korea tobacco growing regions.

• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.92-98
• /
• 2008

A combination of the instrumented indentation and 3D morphology measurement has been tried in order to perform a real-time property measurement of degraded materials in gas pipelines; three-dimensional indent morphologies were recorded using a reflective laser scanner after a series of insturmented indentations on three metallic specimens. Dimensions of the permanent deformation zone and contact boundary were analyzed from the cross-sectional profile over an remnant indent and used for estimating yield strength and hardness, respectively. Estimated yield strength was comparable with that from uniaxial tensile test and actual hardness implying material pile-up effects was lower than the calculated value from indentation curve by $20{\sim}30%$. It means that this 3D image analysis can explain the material pile-up effects on the contact properties. Additionally, a combined system of indentation and laser sensor was newly designed by modifying a shape of the indentation loading fixture.