• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.3
• /
• pp.274-282
• /
• 1992

Annual forage crops have been increasingly important for conpensating insufficient forage production of perennial pastures took place for short interval. This experiment was conducted to determine the effect of sward composition and NㆍP fertilization on forage production and intercompetition of subterranean clover-Italian ryegrass and berseem clover-Italian ryegrass. The two clovers were grown in the field at the clover/ryegrass ratios of 0/100, 25/75, 50/50, 75/25 and 100/0 where no, N (200 kg /ha), P (50 kg /ha) or NㆍP fertilization was done. Each crop was separated after harvest and drying. Relative Crowding Coefficient (RCC), aggressivity and Relative Yield Total (RYT) were analyzed on the basis of the harvested dry matter of each crop. Berseem clover-ryegrass mixtures produced greater yield than subclover-ryegrass mixtures as a result of higher yields of the two component species. In the former forage yield was increased with increased rate of clover up to 75%, while in the latter the highest yields were obtained at more than 50% of the clover. In the mixtures N stimulated the growth of ryegrass, whereas P did only that of subclover. The two clovers produced more forage than the companion grass under no and only P fertilization although the reverse result was true under N or NㆍP fertilization, but the annual forage yield was decreased in the order of N and P, N, P, and no fertilization. The mixture yields were overyielded compared to the Expected Yield. Although generally RCCs and RYTs of subclover were higher than those of berseem clover in the mixtures differing the composition rate or under no and only P fertilization, those of the former clover were lower under N or NㆍP fertilization. In the clover-ryegrass mixtures, ryegrass acted as an aggressor and became more aggressive under P fertilization.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.1
• /
• pp.79-90
• /
• 2020

Objective: In the present study, an liquid chromatography/mass spectrometry (LC/MS) metabolomics approach was performed to investigate potential biomarkers of milk production in high- and low-milk-yield dairy cows and to establish correlations among rumen fluid metabolites. Methods: Sixteen lactating dairy cows with similar parity and days in milk were divided into high-yield (HY) and low-yield (LY) groups based on milk yield. On day 21, rumen fluid metabolites were quantified applying LC/MS. Results: The principal component analysis and orthogonal correction partial least squares discriminant analysis showed significantly separated clusters of the ruminal metabolite profiles of HY and LY groups. Compared with HY group, a total of 24 ruminal metabolites were significantly greater in LY group, such as 3-hydroxyanthranilic acid, carboxylic acids, carboxylic acid derivatives (L-isoleucine, L-valine, L-tyrosine, etc.), diazines (uracil, thymine, cytosine), and palmitic acid, while the concentrations of 30 metabolites were dramatically decreased in LY group compared to HY group, included gentisic acid, caprylic acid, and myristic acid. The metabolite enrichment analysis indicated that protein digestion and absorption, ABC transporters and unsaturated fatty acid biosynthesis were significantly different between the two groups. Correlation analysis between the ruminal microbiome and metabolites revealed that certain typical metabolites were exceedingly associated with definite ruminal bacteria; Firmicutes, Actinobacteria, and Synergistetes phyla were highly correlated with most metabolites. Conclusion: These findings revealed that the ruminal metabolite profiles were significantly different between HY and LY groups, and these results may provide novel insights to evaluate biomarkers for a better feed digestion and may reveal the potential mechanism underlying the difference in milk yield in dairy cows.

• Preventive Nutrition and Food Science
• /
• v.21 no.2
• /
• pp.138-146
• /
• 2016

In this study, we report the optimal extraction conditions for obtaining organosulfur compounds, such as cycloalliin, from garlic by using principal component analysis (PCA). Extraction variables including temperature ($40{\sim}80^{\circ}C$), time (0.5~12 h), and pH (4~12) were investigated for the highest cycloalliin yields. The cycloalliin yield (5.5 mmol/mL) at pH 10 was enhanced by ~40% relative to those (~3.9 mmol/mL) at pH 4 and pH 6. The cycloalliin level at $80^{\circ}C$ showed the highest yield among the tested temperatures (5.05 mmol/mL). Prolonged extraction times also increased cycloalliin yield; the yield after 12 h was enhanced ~2-fold (4 mmol/mL) compared to the control. Isoalliin and cycloalliin levels were inversely correlated, whereas a direct correlation between polyphenol and cycloalliin levels was observed. In storage for 30 days, garlic stored at $60^{\circ}C$ (11 mmol/mL) showed higher levels of cycloalliin and polyphenols than those at $40^{\circ}C$, with the maximum cycloalliin level (13 mmol/mL) on day 15. Based on the PCA analysis, the isoalliin level depended on the extraction time, while cycloalliin amounts were influenced not only by extraction time, but also by pH and temperature. Taken together, extraction of garlic at $80^{\circ}C$, with an incubation time of 12 h, at pH 10 afforded the maximum yield of cycloalliin.

• The Plant Pathology Journal
• /
• v.30 no.3
• /
• pp.261-268
• /
• 2014

This work was conducted to identify mungbean genotypes showing yield stability and resistance to mungbean yellow mosaic virus (MYMV) disease. Sixteen genotypes were evaluated in a randomized complete block design with two replications for two years (2011 and 2012) at three locations (Gazipur, Ishurdi and Madaripur) of the Bangladesh Agricultural Research Institute. An analysis of variance exhibited significant effects of genotype (G), environment (E), and genotype ${\times}$ environment ($G{\times}E$) on grain yield. Among eight agronomic characters, the principal component 1 (PC1) was always higher than the PC2. Considering $G{\times}E$ interaction, BM6 was the best genotype at all three locations in both years. Based on grain yield and stability performance, BM6 ranked first while the worst performing genotypes were BM1 and G10. Based on discrimination and representation, Gazipur was identified as an ideal environment for these mungbeans. Relationship between soil-plant analysis developments (SPAD) value was positive with yield but negative with MYMV severity. BM6, G1 and G2 were considered as promising sources of resistance for low disease score and stable response across the environments. The environment proved to have an influence on MYMV infection under natural infestation. A positive correlation was observed between disease score and the temperature under natural growing condition.

• Plant Breeding and Biotechnology
• /
• v.5 no.3
• /
• pp.237-242
• /
• 2017

AT-hook proteins of plant have shown to be involved in growth and development through the modification of chromatin architecture to co-regulate transcription of genes. Recently, many genes encoding AT-hook protein have been identified and their involvement in senescence delay is investigated. In this study, soybean transgenic plants overexpressing chromatin architecture-controlling ATPG7 gene was produced by Agrobacterium-mediated transformation and investigated for the positive effect on the important agronomic traits mainly focusing on yield-related components. A total of 27 transgenic soybean plants were produced from about 400 explants. $T_1$ seeds were harvested from all transgenic plants. In the analysis of genomic DNAs from soybean transformants, ATPG7 and Bar fragments were amplified as expected, 975 bp and 408 bp in size, respectively. And also exact gene expression was confirmed by reverse transcriptase-PCR (RT-PCR) from transgenic line #6, #7 and #8. In a field evaluation of yield components of ATPG7 transgenic plants ($T_3$), higher plant height, more of pod number and greater average total seed weight were observed with statistical significance. The results of this study indicate that the introduction of ATPG7 gene in soybean may have the positive effect on yield components.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.6
• /
• pp.687-692
• /
• 1997

The barley grown in pot-soil was treated with the NaCl solution of -20 bar in osmotic potential for 10 days, varying the time of treatment: from 20th day before heading; from 10th day before heading and the time of heading. The greatest injury was observed in the case of salt stress at heading or at 10th day before heading: Culm length decreased by 87% : the number of spikes per plant by 82% ; the number of grain per spike by 92% : 1, 000-grain weight by 94% ; yield per pot by 75%. The results also greatly varied depending upon the cultivars and the time of salt stress. Salt stress at the time of heading or at 10th day before heading remarkably decreased yield and yield components. And in terms of grain yield the salt resistance was high in the order of Baegdong, Albori, Hyangmaeg, Olbori and Durubori.

• Korean Journal of Plant Resources
• /
• v.35 no.6
• /
• pp.785-795
• /
• 2022

Traditional germplasms are unsuitable for mechanized production, limiting adzuki bean production. The creation of cultivars that can be harvested by mechanized means is an urgent task for breeders. The bottom pod height (BPH), lodging resistance, and synchronous maturing of adzuki beans are critical factors for the reduction of losses due to mechanized harvesting. In this study, 14 traits of 806 adzuki bean accessions were analyzed. All growth stages and the yield, lodging score, and synchronous maturing correlated negatively with the BPH. These negative correlations reflect the increased difficulty of breeding to simultaneously satisfy the needs for no lodging, high synchronous maturing rates, BPHs > 10 cm, and high yield. We screened three germplasms with no lodging, high synchronous maturing rates, and BPHs > 10 cm that were used as mechanization-adapted breeding material for crossing with high-yield cultivars. Agronomic trait diversity in adzuki beans was also examined in this study. Principal component and cluster analyses were conducted for 806 germplasms resulting in three clusters with the yield and three growth stage traits serving as the main discriminating factors. Cluster 1 included high-yield germplasms with the number of pods per plant and the number of seeds per pod being the major discriminant factors. Cluster 2 included germplasms with long growth periods and large 100-seed weights while cluster 3 contained germplasms with high BPHs. In general, the characteristics that make mechanical harvesting feasible and those assessed in this study could be utilized to choose and enhance adzuki beans production.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.252-252
• /
• 2022

Genotype-by-environment interaction (GEI) refers to the comparative response of genotypes to different environments conditions. Thus, understanding GEI is a fundamental component for selecting superior genotypes for breeding programs. The significance of utilizing early maturing cultivars not only provides flexibility in planting dates, but also serves as an effective strategy to reduce methane emission from the paddy fields. In this study, we conducted multi-environment trials (METs) to evaluate yield-related traits such as culm length, panicle length, panicle number, spikelet per plant, and thousand grain weight. A total of eighty-one Korean commercial rice cultivars categorized as early maturing cultivars, were cultivated in three regions, two planting seasons for two years. The genotype main effect plus genotype-by-environment interaction (GGE) biplot analysis of yield-related traits and grain yield explained 70.02-91.24% of genotype plus GEI variation, and exhibited various patterns of mega-environment delineation, discriminating ability, representativeness, and genotype rankings across the planting seasons and environments. Moreover, simultaneous selection using weighted average of absolute scores from the singular value decomposition (WAASB) and multi-trait stability index (MTSI) revealed six highly recommended genotypes with high stability and crop productivity. The winning genotypes under specific environment can be utilized as useful genetic materials to develop regional specialty cultivars, and recommended genotypes can be used as elite climate-resilient parents to improve yield-potential and reduce methane emission as part to accomplish carbon-neutrality.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.1
• /
• pp.41-50
• /
• 2003

Nondestructive Damage Evaluation (NDE) techniques yield the damage location and its size from the modal characteristics of pre-damaged and post-damaged structures. To predict the system reliability of the aging structure, results from the NDE are integrated into the element/component failure probabilities. The element/component failure probabilities can be calculated from failure functions for each element/component with the aid of techniques from a structural reliability analysis. In this paper, a method to estimate the system reliability of a structure that is based on the reliabilities of elements/components in a given structure is presented. The efficacy of the combination of the nondestructive damage detection and the structural reliability evaluation is demonstrated using pre-damaged and post-damaged modal data obtained from numerical simulations of a rigid frame.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.1
• /
• pp.60-66
• /
• 2005

Pod shape of twenty soybean (Glycine max L. Merrill) genotypes was evaluated quantitatively by image analysis using elliptic Fourier descriptors and their principal components. The closed contour of each pod projection was extracted, and 80 elliptic Fourier coefficients were calculated for each contour. The Fourier coefficients were standardized so that they were invariant of size, rotation, shift, and chain code starting point. Then, the principal components on the standardized Fourier coefficients were evaluated. The cumulative contribution at the fifth principal component was higher than $95\%$, indicating that the first, second, third, fourth, and fifth principal components represented the aspect ratio of the pod, the location of the pod centroid, the sharpness of the two pod tips and the roundness of the base in the pod contour, respectively. Analysis of variance revealed significant genotypic differences in these principal components and seed number per pod. As the principal components for pod shape varied continuously, pod shape might be controlled by polygenes. It was concluded that principal component scores based on elliptic Fourier descriptors yield seemed to be useful in quantitative parameters not only for evaluating soybean pod shape in a soybean breeding program but also for describing pod shape for evaluating soybean germplasm.