• Korean Journal of Agricultural Science
• /
• v.47 no.2
• /
• pp.305-313
• /
• 2020

Root hair development has the potential to increase crop yields and at the same time to decrease fertilizer use, which will be required in the next 30 years to meet the demand for crop-derived commodities in a world with decreasing available natural resources. Root hair defective six (RHD6) encoding a basic helix-loop-helix transcription factor, is associated with root hair differentiation, and its roles are root hair initiation and elongation. Grass plants, rice and Brachypodium have been used as model plants to study the gene function of the root hair defective six like (RSL) subfamily which is orthologous to AtRHD6. The RSL subfamily has an identical gene function with AtRHD6 which is involved with root hair differentiation as well. Plants with longer root hairs within a species should have an improved Pi uptake efficiency; therefore, we would expect that a plant with a high Pi uptake could contribute to increasing the plant yield. We achieved increased root hair length by manipulating the RSL subfamily genes. It is expected that in these transgenic plants, the long root hairs would be sufficient to improve the Pi uptake and hence improve biomass and yield component (tiller, spikelet number, and spikelet weight) of the plant. Here, we demonstrate that Brachypodium transgenic plants overexpressing the BdRSL subfamily genes have an improved biomass and grain yield. The result of this study could be applied to important crop plants like rice.

• Korean Journal of Remote Sensing
• /
• v.1 no.1
• /
• pp.63-87
• /
• 1985

Considerable experience has been reported on the use of spectral data to measure the canopy biomass of dryland grain crops and the use of these estimates to forecast subsequent grain yield. These basic procedures were retested to assess the use of the general process to forecasting grain yield for paddy rice. The use of the ratio of a multiband radiometer simulation of Thematic Mapper band 4(.76 to .90 .mu.m) divided by band 3 (.63 to .69 .mu.m) was tested to estimate the canopy biomass of paddy rice as a function of the stage of development of the rice. The correlation was found to be greatest (R = .94) at panicle differentiation about midway through the development cycle of the rice canopy. The use of this ratio of two spectral bands as a surrogate for canopy biomass was then tested for its correlation against final grain yield. These spectral estimates of canopy biomass produced the highest correlations with final grain yield (R = .87) when measured at the canopy development stages of panicle differentiation and heading. The impact of varying the amounts of supplemental nitrogen on the use of spectral measuremants of canopy biomass to estimate grain yield was also determined. The effect of the development of a significant amount of weed biomass in the rice canopy was also clearly detected.

• Honam Mathematical Journal
• /
• v.41 no.1
• /
• pp.1-17
• /
• 2019

The aim of this paper is to establish certain integrals involving product of the Aleph function with exponential function and multi Gauss's hypergeometric function. Being unified and general in nature, these integrals yield a number of known and new results as special cases. For the sake of illustration, twelve corollaries are also recorded here as special case of our main results.

• Journal of Intelligence and Information Systems
• /
• v.9 no.1
• /
• pp.157-177
• /
• 2003

This paper presents a comprehensive and successful application of data mining methodologies to improve and predict wafer yield in a semiconductor wafer fabrication system. As the wafer fabrication process is getting more complex and the volume of technological data gathered continues to be vast, it is difficult to analyze the cause of yield deterioration effectively by means of statistical or heuristic approaches. To begin with this paper applies a clustering method to automatically identify AUF (Area Uniform Failure) phenomenon from data instead of naked eye that bad chips occurs in a specific area of wafer. Next, sequential pattern analysis and classification methods are applied to and out machines and parameters that are cause of low yield, respectively. Furthermore, radial bases function method is used to predict yield of wafers that are in process. Finally, this paper demonstrates an information system, Y2R-PLUS (Yield Rapid Ramp-up, Prediction, analysis & Up Support), that is developed in order to analyze and predict wafer yield in a korea semiconductor manufacturer.

• Transactions of Materials Processing
• /
• v.20 no.8
• /
• pp.527-533
• /
• 2011

In order to take into account the strong anisotropy and the tension-compression asymmetry of AZ31 sheet alloy, the Cazacu-Plunkett-Barlat yield criterion(Cazacu, 2006), CPB06, was adopted in the present material modeling. The variation of anisotropic coefficients which describe the yield surface evolution of AZ31 is optimized using an interpolation function based on specific calibration results. It generates continuous yield surfaces, which makes it possible to describe the different hardening rates in tension and compression as well as tension-compression asymmetry of magnesium alloys. The ability of the CPB06 yield criterion to predict experimental results was demonstrated and compared with that of the Hill(1948) yield criterion.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.2 no.1
• /
• pp.29-36
• /
• 1998

An instantaneous unit sediment graph (IUSG) model is investigated for prediction of sediment yield from an upland watershed in Northwestern Mississippi. Sediment yields are predicted by convolving source runoff with an IUSG. The IUSG is the distribution of sediment from an instantaneous burst of rainfall producing one unit of runoff. The IUSG, defined as a product of the sediment concentration distribution (SCD) and the instantaneous unit hydrograph (IUH), is known to depend on the characteristics of the effective rainfall. The IUH is derived by the Nash model for each event. The SCD is assumed to be an exponential function for each event and its parameters were correlated with the effective rainfall characteristics. A sediment routing function, based on travel time and sediment particle size, is used to predict the SCD.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.652-657
• /
• 2001

Densification behavior of aluminum alloy(A16061) powder was investigated under cold compaction. Experimental data were obtained under triaxial compression with various loading conditions. A special form of the Cap model was proposed from experimental data of A16061 powder under triaxial compression. The proposed yield function and several yield functions in the literature were implemented into a finite element program (ABAQUS) to compare with experimental data for densification behavior of A16061 powder under cold isostatic pressing and die compaction. The agreement between finite element calculations from the proposed yield function and experimental data is very good under cold isostatic pressing and die compaction.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.1
• /
• pp.95-104
• /
• 2002

Densification behavior of aluminum alloy(A16061) powder was investigated under cold compaction. Experimental data were obtained under triaxial compression with various loading conditions. A special form of the Cap model was proposed from experimental data of A16061 powder under triaxial compression. The proposed yield function and several yield functions in the literature were implemented into a finite element program (ABAQUS) to compare with experimental data for densifcation behavior of A16061 powder under cold isostatic pressing and die compaction. The agreement between finite element calculations from the proposed yield function and experimental data is very good under cold isostatic pressing and die compaction.

• Transactions of Materials Processing
• /
• v.18 no.6
• /
• pp.494-499
• /
• 2009

The time-dependent constitutive law was utilized based on viscoelastic-plasticity to predict the time-dependent spring-back behavior of aluminum alloy 6022-T4 sheets. Besides nonlinear viscoelasticity, non-quadratic anisotropic yield function, Yld2000-2d, was used to account for the anisotropic yield behavior, while the combined isotropic-kinematic hardening law was used to represent the Bauschinger effect and transient hardening. For verification purposes, finite element simulations were performed for the draw-bending and the results were compared with experimental results.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.330-333
• /
• 2009

The time-dependent constitutive law was developed based on viscoelastic-plasticity to describe the time-dependent spring-back behavior of aluminum alloy 6022-T4 sheets. Besides nonlinear viscoelasticity, non-quadratic anisotropic yield function, Yld2000-2d, was used to account for the anisotropic yield behavior, while the combined isotropic-kinematic hardening law was used to represent the Bauschinger effect and transient hardening. For verification purposes, finite element simulations were performed for the draw-bending and the results were compared with experimental results.