• Title/Summary/Keyword: Yield Criterion

Search Result 282, Processing Time 0.033 seconds

A Study on the Wire Drawing of Stainless Steel (스테인리스 와이어의 인발에 관한 연구)

  • Park, Kang-Geun;Choi, Won-Sik
    • Journal of Korean Association for Spatial Structures
    • /
    • v.7 no.1 s.23
    • /
    • pp.71-78
    • /
    • 2007
  • Stainless steel is very famous for using of industrials structure and joint elements. Stainless steel wire drawing is one of the most ancient crafts. But there's not any standard size of tapered die during tile drawing. This paper was studied die angle and dimension of whole die by using AFDEX drawing simulator. Stress, metal flow and strain rate was analyzed by AFDEX tools during the wire drawing. So optimum data of during dies was taken from them. Simulation data was correspond with experimental data. The results of the optimum dies are shown that (1) Reduction angle is $13.8^{\circ}$ (2) Bark relief angle is $20^{\circ}$ (3) Bearing length is 0.7975mm (4) Bearing dia is 0.2393mm The research of the optimum result when the make dies is connected an enterprise. After researching, I hope that indirection effect creation make development situation of the manufactural technical, practical application of the other die size by the detail data, utility factor and economical efficiency.

  • PDF

Size-Variable Block Matching for Extracting Motion Information (동작정보 추출을 위한 가변적 탐색 영역과 블록 크기의 정합)

  • Jang, Seok;Kim, Bong-Keun;Kim, Gye-Young;Choi, Hyung-Il
    • The KIPS Transactions:PartB
    • /
    • v.10B no.3
    • /
    • pp.321-328
    • /
    • 2003
  • This Paper Proposes a size-variable block matching algorithm for motion vector extraction. The Proposed algorithm dynamically determines the search area and the size of a block. We exploit the constraint of small velocity changes of a block along the time to determine the origin of the search area. The range of the search area is adjusted according to the motion coherency of spatially neighboring blocks. The process of determining the sire of a block begins matching with a small block. If the matching degree is not good enough, we expand the size of a block a little bit and then repeat the matching process until our matching criterion Is satisfied. The experimental results show that the proposed algorithm can yield very accurate block motion vectors. Our algorithm outperforms other algorithms in terms of the estimated motion vectors, though our algorithm requires some computational overhead.

New constitutive models for non linear analysis of high strength fibrous reinforced concrete slabs

  • Yaseen, Ahmed Asaad;Abdul-Razzak, Ayad A.
    • Structural Engineering and Mechanics
    • /
    • v.82 no.1
    • /
    • pp.121-131
    • /
    • 2022
  • The main goal of this study is to prepare a program for analyzing High Strength Steel Fibrous Reinforced Concrete (HSSFRC) slabs and predict the response and strength of the slab instead of preparing a prototype and testing it in the laboratory. For this purpose, new equations are proposed to represent the material properties of High Strength Steel Fibrous Reinforced Concrete. The proposed equations obtained from performing regression analysis on many experimental results using statistical programs. The finite element method is adopted for non-linear analysis of the slabs. The eight-node "Serendipity element" (3 DoF) is chosen to represent the concrete. The layered approach is adopted for concrete elements and the steel reinforcement is represented by a smeared layer. The compression properties of the concrete are modeled by a work hardening plasticity approach and the yield condition is determined depending on the first two stress invariants. A tensile strength criterion is adopted in order to estimate the cracks propagation. many experimental results for testing slabs are compared with the numerical results of the present study and a good agreement is achieved regarding load-deflection curves and crack pattern. The response of the load deflection curve is slightly stiff at the beginning because the creep effect is not considered in this study and for assuming perfect bond between the steel reinforcement and the concrete, however, a great agreement is achieved between the ultimate load from the present study and experimental results. For the models of the tension stiffening and cracked shear modulus, the value of Bg and Bt (Where Bg and Bt are the curvature factor for the cracked shear modulus and tension stiffening models respectively) equal to 0.005 give good results compared with experimental result.

Optimization of forensic identification through 3-dimensional imaging analysis of labial tooth surface using open-source software

  • Arofi Kurniawan;Aspalilah Alias;Mohd Yusmiaidil Putera Mohd Yusof;Anand Marya
    • Imaging Science in Dentistry
    • /
    • v.54 no.1
    • /
    • pp.63-69
    • /
    • 2024
  • Purpose: The objective of this study was to determine the minimum number of teeth in the anterior dental arch that would yield accurate results for individual identification in forensic contexts. Materials and Methods: The study involved the analysis of 28 sets of 3-dimensional (3D) point cloud data, focused on the labial surface of the anterior teeth. These datasets were superimposed within each group in both genuine and imposter pairs. Group A incorporated data from the right to the left central incisor, group B from the right to the left lateral incisor, and group C from the right to the left canine. A comprehensive analysis was conducted, including the evaluation of root mean square error (RMSE) values and the distances resulting from the superimposition of dental arch segments. All analyses were conducted using CloudCompare version 2.12.4 (Telecom ParisTech and R&D, Kyiv, Ukraine). Results: The distances between genuine pairs in groups A, B, and C displayed an average range of 0.153 to 0.184mm. In contrast, distances for imposter pairs ranged from 0.338 to 0.522 mm. RMSE values for genuine pairs showed an average range of 0.166 to 0.177, whereas those for imposter pairs ranged from 0.424 to 0.638. A statistically significant difference was observed between the distances of genuine and imposter pairs(P<0.05). Conclusion: The exceptional performance observed for the labial surfaces of anterior teeth underscores their potential as a dependable criterion for accurate 3D dental identification. This was achieved by assessing a minimum of 4 teeth.

Effects of Temperature and Light Intensity on the Growth of Red Pepper(Capsicum annuum L.) in Plastic House During Winter. II. Effects of Temperature and Light Environment on the Early Growth and Yield of Red Pepper under the Multilayered Covering in Non - heated Plastic House (동계 Plastic house내 고추(Capsicum annuum L.) 육묘시 온도와 광도가 생장에 미치는 영향 II. 무가온 다중피복 시설내 온도 및 광환경이 고추의 유묘생장 및 수량에 미치는 영향)

  • 정순주;이범선;권용웅
    • Journal of Bio-Environment Control
    • /
    • v.3 no.2
    • /
    • pp.119-127
    • /
    • 1994
  • This study was conducted to investigate the effects of temperature and light conditions on the vigor and growth responses of red pepper(Capsicum annuum L.) seedlings in the nonheated plastic houses with triple and quadruple coverings during winter. The results obtained were as follows ; 1. The growth in terms of plant height, number of leaves, leaf area and dry weight of each organ was reduced up to 50% in the triple coverings compared to quadruple ones. The greatest difference between the triple coverings and quadruple ones was the leaf area, showing two to five times larger in the quadruple ones. Therefore, the differences of the early environmental conditions during raising seedling stage was well reflected. 2. The leaf expansion in the early stage of seedling was delayed in the triple coverings and subsequently crop growth rate(CGR) significantly reduced. The specific leaf area (SLA) in the triple coverings was less than quadruple ones. The net assimilation rate (NAR) was increased in the early stage of seedlings and then reduced in the quadruple coverings. In triple ones, however, the great reduction showed at six weeks after sowing and then increased sharply. 3. The linear relationship among leaf area, total dry weight and leaf dry weight was observed in the all experimental areas, while between leaf area and crop growth rate only in the quadruple coverings, and between leaf area and net assimilation rate in both triple and quadruple ones. 4. The dry matter partitioned to the leaf increased up to six weeks after sowing in the triple coverings but reduced in the stem and root. However, the adverse results were obtained in the quadruple ones. 5. In the triple coverings, the number of branches showed the exponential increment while fruit weight showed linear increment in both triple and quadruple ones. Higher yield was obtained in the quadruple ones. 6. The shoot dry weight among the characteristics of seedlings was greatly contributed to the yield of red pepper after transplanting. Accordingly, one of the decisive criterion for good quality of red pepper seedlings was determined by the highest correlation between shoot dry weight of growing plant and fruit yield of pepper plant.

  • PDF

Flexural Test of H-Shape Members Fabricated of High-Strength Steel with Considering Local Buckling (국부좌굴을 고려한 고강도 조립 H형강 부재의 휨성능 실험)

  • Lee, Cheol-Ho;Han, Kyu-Hong;Park, Chang-Hee;Kim, Jin-Ho;Lee, Seung-Eun;Ha, Tae-Hyu
    • Journal of Korean Society of Steel Construction
    • /
    • v.23 no.4
    • /
    • pp.417-428
    • /
    • 2011
  • Depending on the plastic deformation capacity required, structural steel design under the current codes can be classified into three categories: elastic, plastic, and seismic design. Most of the current steel codes explicitly forbid the use of a steel material with a yield strength higher than 450 MPa in the plastic design because of the concerns about its low plastic deformation capacity as well as the lack of test data on local and lateral torsional buckling behavior. In this study, flexural tests on full-scale H-shape members built with SM490A (ordinary steel or benchmark material) and HSB800 (high-strength steel) were carried out. The primary objective was to investigate the appropriateness of extrapolating the local buckling criterion of the current codes, which was originally developed for normal-strength steel, to the case of high-strength steel. All the SM490A specimens performed consistently with the current code criteria and exhibited sufficient strength and ductility. The performance of the HSB800 specimens was also very satisfactory from the strength perspective; even the specimens with a noncompact and slender flange developed the plastic moment capacity. The HSB800 specimens, however, showed an inferior plastic rotation capacity due to the premature tensile fracture of the beam bottom flange beneath the vertical stiffener at the loading point. The plastic rotation capacity that was achieved was less than 3 (or the minimum level required for a plastic design). Although the test results in this study indicate that the extrapolation of the current flange local-buckling criterion to the case of high-strength steel is conservative from the elastic design perspective, further testing together with an associated analytical study is required to identify the causes of the tensile fracture and to establish a flange slenderness criterion that is more appropriate for high-strength steel.

Studies on the Varietal Difference in the Physiology of Ripening in Rice with Special Reference to Raising the Percentage of Ripened Grains (수도 등숙의 품종간차이와 그 향상에 관한 연구)

  • Su-Bong Ahn
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.14
    • /
    • pp.1-40
    • /
    • 1973
  • There is a general tendency to increase nitrogen level in rice production to insure an increased yield. On the other hand, percentage of ripened grains is getting decreased with such an increased fertilizer level. Decreasing of the percentage is one of the important yield limiting factors. Especially the newly developed rice variety, 'Tongil' is characterized by a relatively low percentage of ripened grains as compared with the other leading varieties. Therefore, these studies were aimed to finding out of some measures for the improvement of ripening in rice. The studies had been carried out in the field and in the phytotron during the period of three years from 1970 to 1972 at the Crop Experiment Station in Suwon. The results obtained from the experiments could be summarized as follows: 1. The spikelet of Tongil was longer in length, more narrow in width, thinner in thickness, smaller in the volume of grains and lighter in grain weight than those of Jinheung. The specific gravity of grain was closely correlated with grain weight and the relationship with thickness, width and length was getting smaller in Jinheung. On the other hand, Tongil showed a different pattern from Jinheung. The relationship of the specific gravity with grain weight was the greatest and followed by that with the width, thickness and length, in order. 2. The distribution of grain weight selected by specific gravity was different from one variety to another. Most of grains of Jinheung were distributed over the specific gravity of 1.12 with its peak at 1.18, but many of grains of Tongil were distributed below 1.12 with its peak at 1.16. The brown/rough rice ratio was sharply declined below the specific gravity of 1.06 in Jinheung, but that of Tongil was not declined from the 1.20 to the 0.96. Accordingly, it seemed to be unfair to make the specific gravity criterion for ripened grains at 1.06 in the Tongil variety. 3. The increasing tendency of grain weight after flowering was different depending on varieties. Generally speaking, rice varieties originated from cold area showed a slow grain weight increase while Tongil was rapid except at lower temperature in late ripening stage. 4. In the late-tillered culms or weak culms, the number of spikelets was small and the percentage of ripened grains was low. Tongil produced more late-tillered culms and had a longer flowering duration especially at lower temperature, resulting in a lower percentage of ripened grains. 5. The leaf blade of Tongil was short, broad and errect, having light receiving status for photosynthesis was better. The photosynthetic activity of Tongil per unit leaf area was higher than that of Jinheung at higher temperature, but lower at lower temperature. 6. Tongil was highly resistant to lodging because of short culm length, and thick lower-internodes. Before flowering, Tongil had a relatively higher amount of sugars, phosphate, silicate, calcium, manganese and magnesium. 7. The number of spikelets of Tongil was much more than that of Jinheung. The negative correlation was observed between the number of spikelets and percentage of ripened grains in Jinheung, but no correlation was found in Tongil grown at higher temperature. Therefore, grain yield was increased with increased number of spikelets in Tongil. Anthesis was not occurred below 21$^{\circ}C$ in Tongil, so sterile spikelets were increased at lower temperature during flowering stage. 8. The root distribution of Jinheung was deeper than that of Tongil. The root activity of Tongil evaluated by $\alpha$-naphthylamine oxidation method, was higher than that of Jinheung at higher temperature, but lower at lower temperature. It is seemed to be related with discoloration of leaf blades. 9. Tongil had a better light receiving status for photosynthesis and a better productive structure with balance between photosynthesis and respiration, so it is seemed that tongil has more ideal plant type for getting of a higher grain yield as compared with Jinheung. 10. Solar radiation during the 10 days before to 30 days after flowering seemed enough for ripening in suwon, but the air temperature dropped down below 22$^{\circ}C$ beyond August 25. Therefore, it was believed that air temperature is one of ripening limiting factors in this case. 11. The optimum temperature for ripening in Jinheung was relatively lower than that of Tongil requriing more than $25^{\circ}C$. Air temperature below 21$^{\circ}C$ was one of limiting factors for ripening in Tongil. 12. It seemed that Jinheung has relatively high photosensitivity and moderate thermosensitivity, while Tongil has a low photosensitivity, high thermosensitivity and longer basic vegetative phase. 13. Under a condition of higher nitrogen application at late growing stage, the grain yield of Jinheung was increased with improvement of percentage of ripened grains, while grain yield of Tongil decreased due to decreasing the number of spikelets although photosynthetic activity after flowering was. increased. 14. The grain yield of Jinheung was decreased slightly in the late transplanting culture since its photosynthetic activity was relatively high at lower temperature, but that of Tonil was decreased due to its inactive photosynthetic activity at lower temperature. The highest yield of Tongil was obtained in the early transplanting culture. 15. Tongil was adapted to a higher fertilizer and dense transplanting, and the percentage of ripened grains was improved by shortening of the flowering duration with increased number of seedlings per hill. 16. The percentage of vigorous tillers was increased with a denser transplanting and increasing in number of seedlings per hill. 17. The possibility to improve percentage of ripened grains was shown with phosphate application at lower temperature. The above mentioned results are again summarized below. The Japonica type leading varieties should be flowered before August 20 to insure a satisfactory ripening of grains. Nitrogen applied should not be more than 7.5kg/10a as the basal-dressing and the remained nitrogen should be applied at the later growing stage to increase their photosynthetic activity. The morphological and physiological characteristics of Tongil, a semi-dwarf, Indica $\times$ Japonica hybrid variety, are very different from those of other leading rice varieties, requring changes in seed selection by specific gravity method, in milling and in the cultural practices. Considering the peculiar distribution of grains selected by the method and the brown/rough rice ratio, the specific gravity criterion for seed selection should be changed from the currently employed 1.06 to about 0.96 for Tongil. In milling process, it would be advisable to bear in mind the specific traits of Tongil grain appearance. Tongil is a variety with many weak tillers and under lower temperature condition flowering is delayed. Such characteristics result in inactivation of roots and leaf blades which affects substantially lowering of the percentage of ripened grains due to increased unfertilized spikelets. In addition, Tongil is adapted well to higher nitrogen application. Therefore, it would be recommended to transplant Tongil variety earlier in season under the condition of higer nitrogen, phosphate and silicate. A dense planting-space with three vigorous seedlings per hill should be practiced in this case. In order to manifest fully the capability of Tongil, several aspects such as the varietal improvement, culural practices and milling process should be more intensively considered in the future.he future.

  • PDF

Restriction of Metabolizable Energy in Broiler Growers and Its Impact on Grower and Breeder Performance

  • Sunder, G. Skyam;Kumar, Ch. Vijaya;Panda, A.K.;Raju, M.V.L.N.;Rao, S.V. Rama;Gopinath, N.C.S.;Reddy, M.R.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.20 no.8
    • /
    • pp.1258-1265
    • /
    • 2007
  • Metabolizable energy (ME) required for basal metabolism, activity and growth was considered as the criterion for targeting specific increases in body weight (100 g/week) of broiler chicks during the grower phase (5-20 weeks) and its impact was evaluated on breeder performance. Broiler female chicks (460) from a synthetic dam line were randomly distributed to 4 test groups with 23 replicates of 5 birds each and housed in cages. The first group (ME-100) was offered a calculated amount of ME by providing a measured quantity of grower diet (160 g protein and 2,600 kcal ME/kg) which increased with age and weight gain (133-294 kcal/bird/day). The other three groups were offered 10 or 20% less ME (ME-90 and ME-80, respectively) and 10% excess ME (ME-110) over the control group (ME-100). From 21 weeks of age, a single breeder diet (170 g protein and 2,600 kcal ME/kg) was uniformly fed to all groups and the impact of grower ME restriction on breeder performance evaluated up to 58 weeks. The targeted body weight gain of 1,600 g in a 16-week period was achieved by pullets of the ME-100 group almost one week earlier by gaining 8.7 g more weight per week. However, pullets in the ME-90 group gained 1,571 g during the same period, which was closer to the targeted weight. At 20 weeks of age, the conversion efficiency of feed (5.21-5.37), ME (13.9-14.1 kcal/g weight gain) and protein (0.847-0.871 g/g weight gain), eviscerated meat yield, giblet and tibia weights were not influenced by ME restriction, but the weights of abdominal fat and liver were higher with increased ME intake. Reduction of ME by 10% in the grower period significantly delayed sexual maturity (169.3 d), but increased egg production (152.5 /bird) with better persistency. Improved conversion efficiency of feed, ME and protein per g egg content were also observed in this group up to 56 weeks. The fertility and hatchability at 58 weeks of age were higher in the ME-90 group compared to the control and 10% excess ME feeding. In conclusion, the present study revealed the possibility of achieving targeted weight gain in broiler growers by feeding measured quantities of ME during the rearing period with consequential benefits in breeder performance.

An improvement of MT transfer function estimates using by pre-screening scheme based on the statistical distribution of electromagnetic fields (통계적 사전 처리방법을 통한 MT 전달함수 추정의 향상 기법 연구)

  • Yang Junmo;Kwon Byung-Doo;Lee Duk-Kee;Song Youn-Ho;Youn Yong-Hoon
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 2005.05a
    • /
    • pp.273-280
    • /
    • 2005
  • Robust magneto-telluric (MT) response function estimators are now in standard use in electromagnetic induction research. Properly devised and applied, these methods can reduce the influence of unusual data (outlier) in the response (electric field) variable, but often not sensitive to exceptional predictor (magnetic field) data, which are termed leverage points. A bounded influence estimator is described which simultaneously limits the influence of both outlier and leverage point, and has proven to consistently yield more reliable MT response function estimates than conventional robust approach. The bounded influence estimator combines a standard robust M-estimator with leverage weighting based on the statistics of the hat matrix diagonal, which is a standard statistical measure of unusual predictors. Further extensions to MT data analysis are proposed, including a establishment of data rejection criterion which minimize the influence of both electric and magnetic outlier in frequency domain based on statistical distribution of electromagnetic field. The rejection scheme made in this study seems to have an effective performance on eliminating extreme data, which is even not removed by BI estimator, in frequency domain. The effectiveness and advantage of these developments are illustrated using real MT data.

  • PDF

Effects of the dietary digestible fiber-to-starch ratio on pellet quality, growth and cecal microbiota of Angora rabbits

  • Yang, Guiqin;Zhao, Fei;Tian, He;Li, Jiantao;Guo, Dongxin
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.33 no.4
    • /
    • pp.623-633
    • /
    • 2020
  • Objective: Substituting starch with digestible fiber (dF) can improve digestive health of rabbits and reduce costs. Therefore, it is necessary to develop a criterion for dF and starch supply. Effects of the dietary dF-to-starch ratio on pellet quality, growth and cecal microbiota of Angora rabbits were evaluated. Methods: Five isoenergetic and isoproteic diets with increasing dF/starch ratios (0.59, 0.66, 0.71, 1.05, and 1.44) were formulated. A total of 120 Angora rabbits with an average live weight of 2.19 kg were randomly divided into five groups with four replicates. At the end of 40 day feeding trial, cecal digesta were collected to analyse microbiota. Results: The results showed that the dF/starch ratio had linear effects on pellet variables (p<0.01). When the dF/starch ratio was 1.44, the pellets had the lowest powder and highest durability. The dF/starch ratio had unfavorable linear effects on growth variables (p<0.001). When analyzed by quadratic regression, the optimal dF/starch ratios for average weight gain and feed/gain were 0.59 and 0.74, respectively. There were differences in wool yield, fiber length and fiber diameter caused by the dF/starch ratio (p<0.05), and the dF/starch ratios that ranged from 0.66 to 1.06 were appropriate for good results. The cecal microbiota operational taxonomic unit (OTU) number index in the 1.05 dF/starch treatment was higher than that in the 0.66 and 0.71 dF/starch treatments. The higher dF/starch ratio resulted in a higher cecal microbiota OTU number index (p<0.05). The proportion of Ruminococcus in the 0.71 dF/starch treatment was higher than that in the 0.59 dF/starch treatment (p<0.05) Conclusion: The most suitable dF/starch ratio for feed pellet quality is 1.44, and for rabbit growth the optimal range of ratios is from 0.59 to 0.74. With combination of the wool growth, output cost, and cecal microbiota, we suggest that a dietary dF/starch ratio ranging from 0.74 to 1.06 is optimal.