• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.492-498
• /
• 2012

In this study, hydrodynamics such as solid circulation rate and voidage in the desulfurizer and the reaction characteristics of Zn-based solid sorbents were investigated using lab-scale high pressure and high temperature desulfurization process. The continuous HGD (Hot Gas Desulfurization) process consist of a fast fluidized bed type desulfurizer (6.2 m tall pipe of 0.015 m i.d), a bubbling fluidized bed type regenerator (1.6 m tall bed of 0.053 m i.d), a loop-seal and the pressure control valves. The solid circulation rate was measured by varying the slide-gate opening positions, the gas velocities and temperatures of the desulfurizer and the voidage in the desulfurizer was derived by the same way. At the same gas velocities and the same opening positions of the slide gate, the solid circulation rate, which was similar at the temperature of $300^{\circ}C$ and $550^{\circ}C$, was low at those temperatures compared with a room temperature. The voidage in the desulfurizer showed a fast fluidized bed type when the opening positions of the slide gate were 10~20% while that showed a turbulent fluidized bed type when those of slide gate were 30~40%. The reaction characteristics of Zn-based solid sorbent were investigated by different desulfurization temperatures at 20 atm in the continuous operation. The $H_2S$ removal efficiency tended to decrease below the desulfurization temperature of $450^{\circ}C$. Thus, the 10 hour continuous operation has been performed at the desulfurization temperature of $500^{\circ}C$ in order to maintain the high $H_2S$ removal efficiency. During 10 hour continuous operation, the $H_2S$ removal efficiency was above 99.99% because the $H_2S$ concentration after desulfurization was not detected at the inlet $H_2S$ concentration of 5,000 ppmv condition using UV analyzers (Radas2) and the detector tube (GASTEC) which lower detection limit is 1 ppmv.

• Journal of Haehwa Medicine
• /
• v.9 no.1
• /
• pp.547-594
• /
• 2000

I. Introduction The essence of Oriental medicine consists of ancient books, experienced doctors and succeeded skills of common society. Many famous doctors studied medical science by their fathers or teachers. So the history of medical science is long. $\ll$DangDaeMyeongIImJeungJeongHwa(當代名醫臨證精華)$\gg$ written by SaWoogWang(史宇廣) and DanSeoGeon(單書健) has many medical experience of famous doctors. So it has important historical value. Bi(痺) means blocking. BiJeung is one kind of symptoms making muscles, bones and jonts feel pain, numbness or edema. For example it can be gout or SLE etc. So I studied ${\ll}BiJeungJuJip{\gg}$. II. Final Decision Following decisions of Chinese doctors of 20th century are as follows ; 1. JuYangChun(朱良春) emphasized on IkSinJangDok(益腎壯督) to treat BiJeong. And he devided WanBi(頑痺) as PungHanSeup(風寒濕), DamEo(痰瘀), YeolDok(熱毒), SinHeo(腎虛). He used insects for medicine. 2. ChoSuDoek(焦樹德) introduced past prescription. He used ChiBiTang(治痺湯) to treat HaengBi(行痺), TongBi(痛痺), ChakBi(着痺). He insisted that Han(寒; coldness) and Seup(濕; dampness) be Eum(陰) and Pung(風; wind) can change his character to be Eum. After all BiJeung is usually EumJeung. So he used GaeJi(桂枝) and BuJa(附子). By the way he used ChungYeolSanBiTang(淸熱散痺湯) for YeolBi, BoSinGeoHanChiWangTang SaBok(王士福) emphasized on the importance of medicine. He introduced many treatments like CheongYeol(情熱) for YeolBi and YiO(二烏) for HanBi. And he divided BiJeung period for three steps. At 1st step, we must use GeoSa(祛邪), at 2nd step, we must use BuJeong(扶正) and at 3rd step, we must use BoHyeol(補血), he insisted. And he introduced many herbs to treat BiJeung. 4. JeongGwangJeok(丁光迪) said that GaeJi(桂枝), MaHwang(麻黃), OYak(烏蘖) and BuJa(附子) are very important for TongRak(通絡). And pain usually results from Han(寒), so he liked to use hot-character herbs. 5. MaGi(馬志) insisted that BiJeung usually result from ChilJeong(七情). And he liked to use insects for treatment of BiJeung. 6. WeolSeokMu(越錫武) introduced 8 kinds of treatments and divided BiJeung period. Also he divided BeJeung for PungBi(風痺), HanBi(寒痺) and SeupBi(濕痺). 7. SeoGeaHam(徐季含) observed many patients and concluded that 86.7% of BiJeung is HeuJeung(虛症). 8. YuJiMyeong(劉志明) said that YeolBi is important and CheongYeol is also important. So he emphasized on DangGyuiJeomTongTang(當歸拈痛湯) and SeonBiTang(宣痺湯). 9. WangLiChu(汪履秋) studied cause of WanBi. Internal cause is GiHyeolHeo(氣血虛) and GanSinHeo(肝腎虛) and external cause is SaGi(邪氣) he insisted. 10. WangSaSang(王士相) said that YeolBi can be SeupYeolBi or EumHeuYeolBi(陰虛熱痺) and HanSeupBi(寒濕痺) is rare. He use WooBangJaSan(牛蒡子散) and BangPungHwan(防風丸) for SeupYeolBi, DangGyuiSaYeokTang(當歸四逆湯) for HanSeupBi. 11. JinTaekGang(陳澤江) treated YeolBi with BaekHoGaGyeJiTang(自虎加桂枝湯) and SaMyoSan(四妙散). If they don't have effect, he tried to cure BiJeung step by step. And he used e term of GeunBi(筋痺) and BangGiMogwaEIInTang(防己木瓜薏苡仁湯) was good for GeunBi. 12. MaSeoJeong(麻瑞亭) said that PungSeupYeokJeul(風濕歷節) is BiJeung and it is related to GanBinSin(肝脾腎; liver, Spleen, Kindey). And he emphasized on balance WiGi(衛氣) and YoungHeul(營血). 13. SaJeJu(史濟桂) said that GeunGolBi(筋骨痺) is similar to arthritis and sometimes called ChakBi. And SinBi(腎痺) is terminal stage of ChakBi, he said. He also used insects for treatment. 14. JeongJeNam(丁濟南) tried to cure SLE and used GyeJi, CheonCho(川椒), SinGeunCho(伸筋草), SunRyeongBi(仙靈脾), HyconSam(玄蔘) and GamCho(甘草). 15. JinGYungHwa(陳景和) emphasized on diagnosis of tongue. If the color of tongue is blue, it usually has EoHyeol(瘀血), for example. And he also used insects. 16. JuSongI(朱松毅) tried to devide YeolBi with OnByeong(溫病), Wi(衛), Gi(氣) and Hyeol(血). 17. RuDaBong(蔞多峰) said that JyeongHeo(正虛), OiSa(外邪) and EoHyeol are closely related. And he explained BiJeung by deviding the body into the part, for example head, neck, shoulder, waist, upper limb and lower limb. 18. YuMuBo(劉茂甫) defined PungHanSyubBi as chronic stage and YeolBi as acute stage.

• Korean journal of applied entomology
• /
• v.46 no.3
• /
• pp.343-348
• /
• 2007

To assess the environmental risks of transgenic chili pepper with PepEST gene on non-target organisms before it exposes to the agro-ecosystem environments, we conducted the three sets of green peach aphids (Myzus persicas S.) life table experiment under laboratory conditions (Temp. $25^{\circ}C$, R.H. 50-70%, Photoperiod L16 : D8) in series during 2005-2006. We measured the net reproductive rate ($R_0)^*$, the intrinsic rate of increase ($r_m$), the mean generation time ($T_c$), $fecundity^*$, life span, and reproduction period between non-transgenic chili peppers and transgenic chili peppers, respectively. The life span of green peach aphids from three sets was 31, 27, 25 days, and the period of life span was similar to the general average length of green peach aphids, 25-29 days. Although the first reproduction of transgenic pepper was similar to the non transgenic pepper (P>0.05), the fecundity and the net reproductive rate ($R_o$) by using Jackknife method of transgenic pepper were lower than those of non transgenic pepper (P<0.05). Conclusively, we observed the adverse effect from our results but we should execute further experiments to confirm the results at the fields with the similar way.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.9-17
• /
• 2017

Characteristics of aerodynamic damping ratios of a helical $180^{\circ}$ model which shows better aerodynamic behavior in both along-wind and across-wind responses on a super tall building was investigated by an aeroelastic model test. The aerodynamic damping ratio was evaluated from the wind-induced responses of the model by using Random Decrement (RD) technique. Further, various triggering levels in evaluation of aerodynamic damping ratios using RD technique were also examined. As a result, it was found that when at least 2000 segments were used for evaluating aerodynamic damping ratio for ensemble averaging, the aerodynamic damping ratio can be obtained more consistently with lower irregular fluctuations. This is good agreement with those of previous studies. Another notable observation was that for square and helical $180^{\circ}$ models, the aerodynamic damping ratios in along-wind direction showed similar linear trends with reduced wind speeds regarding of building shapes. On the other hand, for the helical $180^{\circ}$ model, the aerodynamic damping ratio in across-wind direction showed quite different trends with those of the square model. In addition, the aerodynamic damping ratios of the helical $180^{\circ}$ model showed very similar trends with respect to the change of wind direction, and showed gradually increasing trends having small fluctuations with reduced wind speeds. Another observation was that in definition of triggering levels in RD technique on aerodynamic damping ratios, it may be possible to adopt the triggering levels of "standard deviation" or "${\sqrt{2}}$ times of the standard deviation" of the response time history if RD functions have a large number of triggering points. Further, these triggering levels may result in similar values and distributions with reduced wind speeds and either may be acceptable.

• Geophysics and Geophysical Exploration
• /
• v.13 no.4
• /
• pp.357-363
• /
• 2010

In this study, we investigated the geologic structure of the basement and overlying sediments of the construction site of the dinosaur egg fossil museum in Hwasung, Gyeonggi Province through refraction seismology, drilling, and downward seismic velocity measurements in the drill holes. The construction site ($350{\times}750\;m^2$) is located in the reclaimed area south of Sihwa Lake, Gojeong-ri. About 6,950 m of seismic refraction data consisting of 11 lines were acquired using a sledge hammer source. Drilling to the basement was performed at five sites. Sediment samples from drilling were analysed for grain-size distribution and age dating. At two drill holes, seismic velocity was measured with depth using a hammer as a seismic source. The geological structure of the study area consists of, from top to bottom, a tidal flat layer (5 ~ 12 m thick), a weathered soil layer (2 ~ 8 m thick), and the basement. The basement is interpreted as Cretaceous sedimentary rocks that tend to be shallow eastward. The volume of the tidal flat sediments and weathered soil in the study area is estimated as $1.4{\times}10^6\;m^3$, weighing $3.5{\times}10^6$ tons. The rate of sea level rise since 8,000 yrs BP is estimated to be 0.1 ~ 0.15 cm/yr.

• Clinical and Experimental Reproductive Medicine
• /
• v.25 no.1
• /
• pp.87-92
• /
• 1998

This study was carried out to investigate in vitro/in vivo development of vitrified mouse oocytes. Mouse oocytes were vitrified using EFS30, 35 and 40 (30, 35 and 40% ethylene glycol, 18% ficoll and 0.5 M sucrose in M2 medium). After being exposed or vitrified-thawed, oocytes of normal morphology were inseminated in vitro by $1-2\times10^6/ml$ of epididymal sperm. The rates of fertilization, in vitro/in vivo development and cell number (inner cell mass and tropectoderm cell) of blastocysts in each treatment group were examined. The results obtained in these experiments were summarized as follows: The cleavage rates were obtained in EFS35 containing 35% ethylene glycol higher than in EFS30 and EFS40. The development rate of vitrified-thawed oocytes to two-cell stage after in vitro fertilization (51.1%) was significantly different compared to that of exposed to vitrification solution without cooling (60.0%) and control (68.2%) (p<0.05). However, there were no differences in the blastocyst formation from the cleaved embryos among groups (75.0, 73.3 and 80.0%). Also, the mean number of cells per blastocysts of vitrified group $(92.5{\pm}2.9)$ was similar to that of the exposed $(98.5{\pm}5.3)$ and control $(100.9{\pm}4.8)$. In vivo development of the blastocysts derived from vitrified-thawed oocytes resulted in fetal development (50.7%) and implantation rates (80.0%) which are very similar to those of control (58.2, 78.2%). These results suggest that mouse oocytes could be cryopreserved using vitrification solution (EFS35) based on ethylene glycol.

• The Journal of the Petrological Society of Korea
• /
• v.24 no.2
• /
• pp.107-124
• /
• 2015

The 'Imjin System' (or Rimjin System) was established in 1962 as a new stratigraphic unit separated from the Upper Paleozoic Pyeongan System based on the discovery of brachiopods and echinoderms of possible Devonian age. Subsequent discoveries of the Middle Devonian charophytes confirmed the Devonian age of the system. The Imjin System is distributed in the Imjingang Belt between the Pyongnam Basin and the Gyeonggi Massif, spans from the eastern areas including Cholwon-gun of the Gangwon Province, Gumchon-gun, Phanmun-gun, and Tosan-gun of the Hwanghaebuk Province, to the western areas of Gangryong-gun and Ongjin-gun of the Hwanghaenam Province, and includes the Yeoncheon Group (metamorphic complex) to the south. Unlike the lower Paleozoic strata in the Pyongnam Basin which solely produce marine invertebrate fossils, the Imjin System yields diverse non-marine plant and algal fossils. Brachiopods of the system are similar to those from the Devonian of the South China Block and include taxa endemic to the platform, implying a close paleogeographic affinity to the South China Block. The Imjin System is generally considered as of Middle to Late Devonian in age, although there have been suggestions that the system is of the Middle Devonian to Carboniferous in age. North Korean workers postulated that the Imjin System was deposited in the current geographic position, where the "Imjin Sea" (an extension of the South China Platform) was located during the Devonian. The Imjin System displays strong local variations in stratigraphy and its thickness. It has recently been reported that the strata are repeated and overturned by thrust faults in many exposures. The Yeoncheon Group a southward extension of the Imjin System, also experienced intense tight folding and contractional deformation. Northward decrease in metamorphic grade within the system suggests that the northern part of the Gyeonggi Massif and the Imjingang Belt are probably an extension of the Dabie-Sulu Belt between the South China and Sino-Korean blocks, and the Imjin System is an remnant of accretion resulted from the collision between the two blocks. In order to understand tectonic evolution and Paleozoic paleogeography of eastern Asia, further studies on stratigraphic, sedimentologic and tectonic evolution of the Imjin System involving scientists from the two Koreas are urgently needed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.6
• /
• pp.1-6
• /
• 2011

A transparent oxide thin film transistors (Transparent Oxide-TFT) have been fabricated by RF magnetron sputtering at room temperature using amorphous indium zinc oxide (a-IZO) as both of active channel and source/drain, gate electrodes and co-sputtered $HfO_2-Al_2O_3$ (HfAIO) as gate dielectric. In spite of its high dielectric constant > 20), $HfO_2$ has some drawbacks including high leakage current and rough surface morphologies originated from small energy band gap (5.31eV) and microcrystalline structure. In this work, the incorporation of $Al_2O_3$ into $HfO_2$ was obtained by co-sputtering of $HfO_2$ and $Al_2O_3$ without any intentional substrate heating and its structural and electrical properties were investigated by x-ray diffraction (XRD), atomic force microscopy (AFM) and spectroscopic ellipsometer (SE) analyses. The XRD studies confirmed that the microcrystalline structures of $HfO_2$ were transformed to amorphous structures of HfAIO. By AFM analysis, HfAIO films (0.490nm) were considerably smoother than $HfO_2$ films (2.979nm) due to their amorphous structure. The energy band gap ($E_g$) deduced by spectroscopic ellipsometer was increased from 5.17eV ($HfO_2$) to 5.42eV (HfAIO). The electrical performances of TFTs which are made of well-controlled active/electrode IZO materials and co-sputtered HfAIO dielectric material, exhibited a field effect mobility of more than $10cm^2/V{\cdot}s$, a threshold voltage of ~2 V, an $I_{on/off}$ ratio of > $10^5$, and a max on-current of > 2 mA.

• Clean Technology
• /
• v.20 no.2
• /
• pp.189-201
• /
• 2014

Partial oxidation, $CO_2$ reforming and the oxidative $CO_2$ reforming of $CH_4$ to produce synthesis gas over supported Ni hydrotalcite-type ($Ni_{0.5}Ca_{2.5}Al$ catalyst) catalysts were carried out and the effects of metal supports (i.e.; Mg and Ca) on the formation of a stable double-layer structure on the catalysts were evaluated. The $CH_4$ reforming stability was determined to be affected by the differences in the interaction strength between the active Ni ions and support metal ions. Only a Ni-Mg-Al composition produced a highly stable hydrotalcite-type double-layered structure; while the Ni-Ca-Al-type composition did not. Such structure provides excellent stability for the catalyst (-80% efficiency) as confirmed by the long-term $CO_2$ reforming test (-100 h), while the Ni-Ca-Al catalyst exhibited deactivation phases starting at the beginning of the reaction. The interaction strength between the active metal (Ni) and the supporting components (Mg and Al) was determined by temperature-programed reduction (TPR) analyses. The affinity was also confirmed by the TPR temperature because the Ni-Mg-Al catalyst required a higher temperature to reduce the Ni relative to the Ni-Ca-Al catalyst. The highest initial activity for synthesis gas production was observed for the $Ni_{0.5}Ca_{2.5}Al$ catalyst; however, this activity decreased quickly due to coke formation. The $Ni_{0.5}Ca_{2.5}Al$ catalyst exhibited a high reactivity and was more stable than the other catalysts because it had a higher resistance to coke formation.

• Tuberculosis and Respiratory Diseases
• /
• v.40 no.6
• /
• pp.638-645
• /
• 1993

Objectives: The functional effects of pulmonary resection are dependent on the preexisting function of resected and remaining tissue as well as on the compensatory potential of the remaining tissue. Nowadays, large pulmonary resections are usually applied to lung cancer patients often already compromised by chronic lung disease. It is important to evaluate the pulmonary reserve after lung resection preoperatively in the decision of operability and extent of resection. The aim of this study was to evaluate the changes of pulmonary function after pulmonary resection. Methods: 8 lobectomized and 8 pneumonectomized patients were evaluated. The pulmonary function test was performed preoperatively and in immediate postoperative period and thereafter to 5 years at 3 months interval. Results: 1) The pulmonary function 1 week after operation was significantly low compared with predicted values in, lobectomy and pneumonectomy groups(p<0.05), and improved closely to their predicted values 3 months after operation. 2) The FVC was maintained above predicted value at 6-24 months and similar to predicted value thereafter in lobectomy group. In pneumonectomy group, the FVC maintained similar to predicted value at 6-36 months and improved above its predicted value thereafter. 3) The FEV1 was maintained similar to their predicted values from 6 months to 5 years after operation in both groups. 4) The FEV1/FVC did not change in the course of time in both groups. 5) The FEF25-75% was maintained similar to predicted value at 6-60 months after operation in lobectomy group, but it decreased under predicted value after 1 year in pneumonectomy group. 6) The MVV was maintained similar to predicted value at 6-24 months and decrease thereafter in lobectomy group. In pneumonectomy group, the MVV was maintained at 6-60 months after operation. 7) The differeces in the pulmonary function(FVC, FEV1, FEF25-75%, MVV) between two groups were seen only at 6 months after operation(p<0.05). Conclusion: The pulmonary function was markedly decreased immediately after operation, improved similar to predicted value at 1-3 months, highest at 6 months, and maintained similar to the predicted value to 5 years after pulmonary resection. The difference in the pulmonary function between two groups was the most at 6 months after operation.