• 한국연소학회:학술대회논문집
• /
• 1999.10a
• /
• pp.111-115
• /
• 1999

In order to enhance the burner performance of household gas fired absorption chiller/heaters, the operating condition(excess air $\approx$ 10%) of the burner currently being used was required to be optimized. In this regard, we examined where the $CO_{\min}$. emission limit was located between blow off and yellow tip limit and how much amount of excess air was exhausted by means of observing blow off and yellow tip limit. It was found that the $CO_{\min}$ limit(excess air ${\approx}$ 4%) was determined near the yellow tip limit. The effect of exhaust pressure on the $CO_{\min}$. limit was that, if exhaust pressure was higher than that in steady condition, higher air blower fan rpm is demanded to maintain the $CO_{\min}$ limit. Therefore, it was necessary to optimize the operating condition of burner in terms of a thermal efficiency and safety.

• Archives of Craniofacial Surgery
• /
• v.24 no.2
• /
• pp.87-90
• /
• 2023

Endotracheal intubation is often necessary in the course of animal experiments, especially in craniofacial surgery. However, endotracheal intubation can be a major burden in this context. The authors performed simple and cost-saving method using a 200 µL yellow micropipette tip, and the success of this method was demonstrated by X-ray and autopsy. We used a total of 30 rats. After the rats were fixed with a plaster, the trachea and vocal cords were visualized with the tongue pulled back. Under direct visualization of the vocal cords, a curving micropipette tip was advanced into the trachea. This method can be learned quickly and applied successfully by general experimenters. We successfully intubated all 30 rats without any complications. The success rate of micropipette tip intubation was 100%. This procedure was performed by one experimenter within 2 to 3 minutes after induction of anesthesia. We demonstrated its superiority by X-ray and autopsy. Herein, we describe endotracheal intubation of rats using micropipette tips. To the best of our knowledge, this method is novel and represents the simplest and most efficient means of intubation in rats, providing an alternative to conventional endotracheal intubation.

• Journal of Ecology and Environment
• /
• v.37 no.4
• /
• pp.201-208
• /
• 2014

To date, no study has reported detailed morphological characteristics of Korean sea turtles. Due to the lack of such basic information on Korean sea turtles, further related studies have been difficult in South Korea. In this report, we determined the species and the sex of the one sea turtle caught from the Yellow Sea of Korea (Taean-gun, Chungcheongnamdo) on July 17, 2013, and described its detailed morphological characteristics. The sea turtle was identified as a loggerhead sea turtle (Caretta caretta) by the presence of an interprefrontal scale on the head. The turtle had three times longer length between the edge of anal scute to the anus than that between the anus to tip of the tail, and the size of a pair of claws on the flippers were distinctively different, suggesting that the turtle was a male. Finally, the assumption that the sea turtle might be sexually mature is based on its body weight (59.95 kg), the maximum straight length of the carapace (72.5 cm), and the worn serrated parts at the edge of supracaudal scutes. The loggerhead sea turtle described in this study is the first record from the Yellow Sea of Korea.

• The Plant Pathology Journal
• /
• v.36 no.5
• /
• pp.497-502
• /
• 2020

Barley yellow dwarf virus (BYDV) is an economically important plant pathogen that causes stunted growth, delayed heading, leaf yellowing, and purple leaf tip, thereby reducing the yields of cereal crops worldwide. In the present study, a reverse transcription recombinase polymerase amplification (RT-RPA) assay was developed for the detection of BYDV in oat leaf samples. The RT-RPA assay involved incubation at an isothermal temperature (42℃) and could be performed rapidly in 5 min. In addition, no cross-reactivity was observed to occur with other cereal-infecting viruses, and the method was 100 times more sensitive than conventional reverse transcription polymerase chain reaction. Furthermore, the assay was validated for the detection of BYDV in both field-collected oat leaves and viruliferous aphids. Thus, the RT-RPA assay developed in the present study represents a simple, rapid, sensitive, and reliable method for detecting BYDV in oats.

• Journal of the korean society of oceanography
• /
• v.31 no.1
• /
• pp.23-31
• /
• 1996

The thermo-haline front frequently observed near the southwestern tip of Korean Peninsula is successfully modeled using a simple model. The front is formed by the wind-driven advection of local cooled water to the southern warm area which is kept warm by large heat advection of the Tsushima Current. The front thus locates north of the Tsushima Current which runs approximately along the isobaths in the east-west direction.

• Korean Journal of Agricultural Science
• /
• v.39 no.1
• /
• pp.29-34
• /
• 2012

This study was carried out to identify the characteristics of 37 corn hybrids, which composed with 18 yellow colored kernel, 9 purple colored kernel, 8 white colored kernel. Days to silking of three colored waxy corn hybrids ranged from 61 to 73 days after sowing as midium-late ecotype. Ear length of hybrids ranged from 10.3 to 22.7 cm, and among them a total 22 waxy corn hybrids including CNU038 showed over 20 cm in ear length. The fresh weight per ear ranged from 58 to 289 g as the 32.9% of large coefficient of variance. In there results, we found yellow colored waxy corn hybrids showed relatively longer in ear length and heavier in fresh weight per ear compare to other colored waxy corn hybrids. In correlation relationships, plant height, ear height, stem diameter, ear length and ear weight showed positive correlation between themselves, while tip filling ratio did negative correlation with silking stage, plant height, ear length, ear weight and kernel thickness. Also, 100 kernel weight did positive correlation between traits related to ear and kernel.

• Journal of the Korea Convergence Society
• /
• v.12 no.7
• /
• pp.125-131
• /
• 2021

Blue light with strong energy is required for light-curing resin treatment, which is being used more frequently in dentistry. To reduce the risk of exposure to scattered light, we tried to use colored lenses. The tips for light curing machine and a commercially available yellow-type blue-light blocking lens and a yellow lens colored with yellow dye, which are expected to be effective in blocking blue light, were placed in a UV-Vis spectrometer device, and transmission and blocking of blue light were tested respectively. As a result, the average blue light blocking rate of the light curing machine tips was 99.49%, and the C lens with the highest color density among commercially available lenses showed a high blue light blocking rate of 99.54%. In the case of lenses tinted with yellow, the yellow tinted C lens with the highest tint concentration showed 87.57% of blue light blocking rate. It is judged that the side effects related to the eyes caused by blue light can be reduced if a yellow-type commercially available or colored lens is worn along with a light curing machine tip during resin treatment.

• Journal of the Korean Wood Science and Technology
• /
• v.20 no.2
• /
• pp.61-72
• /
• 1992

This study was carried out to investigate the fracture behavior and the fracture criterion of yellow lauan(Shorea spp.), when has used for furniture and wood structures, and to offer a reliability for wood structure and basic data for wood fracture criterion in experiments which are fracture tested under mode I, mode II and mixed mode loading condition. The results were summarized as follows; 1. Fractures in specimens which have inclined grain in yellow lauan procedeed from crack tip in the radial direction along the grain. 2. In yellow lauan, $K_{IC}RL$ was 42.1kg/$cm^{3/2}$ and $K_{IIC}RL$ was 15.8kg/$cm^{3/2}$. 3. The fracture criteria of lauan were; ($K_I/K_{IC}$)+($K_{II}/K_{IIC}$)=1 in RL system with inclined grain at $45^{\circ}$, ($K_I/K_{IC}$)+$(K_{II}/K_{IIC})^2$=1 with inclined grain at $15^{\circ}$ and $(K_I/K_{IC})^2$+$(K_{II}/K_{IIC})^2$=1 with inclined grain at $30^{\circ}$, $60^{\circ}$, $75^{\circ}$ and $90^{\circ}$, respectively. 4. The fracture criterion of wood could vary with the species, and the load applying condition. In order to measure the fracture criterion strictly, along with standardization of specimen geometry a large amount of experimental data is needed. 5. $K_{IC}$(critical stress intensity factor) can be predicted by grain angle. As the grain inclined angle increased, $K_{IC}$ and $K_{IIC}$ are increased.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.8 no.3
• /
• pp.327-339
• /
• 2003

During the winter in February 1998, January and April 1999, interdisciplinary research was conducted in a large area including the South Sea of Korea and northern East China Sea to examine distribution and structure. Water masses identified from the observed data are Warm Water originated from Tsushima Warm Current, Yellow Sea Cold Water (Northern or Central Cold Water) and Korean Southern Sea Cold Water. In the southern Yellow Sea, Warm Water originated from Tsushima Warm Current, flowing into the Cheju Strait after turning around the western Cheju Island, makes a front of '┍' shape, which is bounded by the Yellow Sea Central Cold Water in the southern part of Daeheuksan Island and by the Yellow Sea Northern Cold Water in the eastern part of the Yangtze Bank. This front changes its corner shape and position with strength of the warm water extension toward northwestern Yellow Sea. The position and structure of the fronts off the southwestern tip of the Korean peninsular and near the Yangtze Bank varies with observation period. In the front in the South Sea of Korea, cold coastal water which if formed independently due to local cooling, ,sinks along the sloping bottom. We explained the processes of variations in the distribution and structure of these winter fronts in terms of up-wind and down-wind flow by the seasonal monsoon, heat budget through the sea surface and density difference across the fronts.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.6
• /
• pp.478-484
• /
• 2004

On 11 June 1991, eggs from the brood stock of small yellow croaker (Larimichthys polyactis) were artificially fertilized using the standard dry method and were hatched. Each of the fertilized eggs (1.1-1.2 mm in diameter) had an oil globule and was transparent and buoyant. The fertilized eggs hatched in a range of water temperatures $(17.5-20.3^{\circ}C)$ 44 hrs after fertilization. The total lengths of the newly hatched larvae were 3.1-3.3 mm, and these hatchlings had 31 myotomes (10+21). Melanophores and yellow-brown chromatophores were concentrated on the head, at the ventral part of the yolk, and in the middle of the tail. Four days after hatching, the larvae completely absorbed the yolk and became flexions of 5.1-5.5 mm in total length. Fifteen days after hatching, one spine (the anterior tip of the maxillary) appeared in the upper jaw and three spines developed at the upper parts of the eyes and on the posterior part of the head. At this stage, the larvae were approximately 8.3 mm long. Thirty-nine days after hatching, juveniles (1.9-3.4 mm in total length) had a pointed tail fin. By 66 days after hatching, the juvenile fish (about 4.0-6.5 mm in total length) were similar to adult fish in body shape. The larvae of L. polyactis could be distinguished from those of L. croacea by two distinct characteristics: the large number of vertebrae (28-29), and a relatively small bony ridge on the occipital region of the head.