• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.3
• /
• pp.295-305
• /
• 2018

We present a passively Q-switched monolithic Er:Yb:glass microchip laser developed in our lab. The microchip laser can produce pulses at 1535 nm of the 'eye-safe' wavelengths with the pulse energy of 50 uJ and the pulse width of 4-6 ns. Using the laser we also designed and developed a pulsed Er:Yb:glass microchip laser rangefinder. Expressions for background and signal power, noise, and signal-to-noise ratio are reviewed. A computer simulation was used to optimize laser power, receiver aperture, and preamplifier bandwidth for the efficient system design of the laser rangefinder. Experimental results are presented to compare with the theory.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.6
• /
• pp.739-744
• /
• 1996

Lanthanide diphthalocyanines have interesting properties on electrochemical and chemical redox reactions. It is however, difficult to use because of thier short device life. Plasma-polymerization attends to improvement thier device life. Yb-diphthalocyanine ($YbPc_2$) polymer film was deposited in a parallel plate electrodes-type RF plasma reactor. $YbPc_2$ was sublimed into the argon plasma, and polymer film was obtained on a substrate. Radio frequency was constant of 13.56MHz. Pressure of argon gas, sublimation rate of $YbPc_2$ and RF power were variable parameters depending on film quality. Surface of polymer films include a lot of sub-micron order lumps. It was indicated that size of lumps depends on polymerization degree controled by parameters. Size of lumps and polymerization degree are increased with RF power. However, by the high RF power over 40W, polymerization degree is decreased with RF power and surface of film is rough. In condition of RF power is high, polymerization will compete with etching of film. We obtained good films for electrochromic display with RF power of 20W, argon gas pressure of 8.0 Pa and sublimationrate of $1.2 \times 10$ mol/min, and good films for gas sensor with RF power of 30W, argon gas pressure of 10.6Pa and sublimation rate of $1.2 \times 10$ mol/min.

• Journal of the Korean Ceramic Society
• /
• v.37 no.3
• /
• pp.271-279
• /
• 2000

5 m/o Yb-doped SrCeO3 proton conductor was prepared by a solid state reaction method and its total electriccal conductivity measured as a function of both oxygen partial pressure and water vapor partial pressure in the temperature range of 500~100$0^{\circ}C$. From the total conductivity have been deconvoluted the partial conductivities of oxide ions, protons, and holes, respectively, on the basis of the defect model proposed. The equilibrium constant of hydrogen-dissolution reaction, proton concentration, and mobilities of oxygen vacancies and protons have subsequently been evaluated. It is verified that SrCe1-xYbxO3 is a mixed conductor of holes, protons and oxide ions and the proton conduction prevails as temperature decreases and water vapor pressure increases. The heat of water dissolution takes a representative value of $\Delta$HoH=-(140$\pm$20) kJ/mol-H2O, but tends to be less negative with increasing temperature. Migration enthalpies of proton and oxygen vacancy are extracted as 0.83$\pm$0.10 eV and 0.81$\pm$0.01 eV, respectively.

• Current Optics and Photonics
• /
• v.1 no.5
• /
• pp.525-528
• /
• 2017

High-energy, high-power, quasi-continuous wave (QCW) operation of double-clad Yb fiber lasers incorporating an incoherent signal combiner is reported. We constructed four efficient, high-power Yb fiber lasers, each of which produced rectangular pulses at 1080 nm with a pulse energy greater than 15 J, and a pulse duration of 10 ms at a repetition rate of 10 Hz, corresponding to an average power of over 150 W and a peak power of over 1.5 kW for ~200 W of incident pump power at 915 nm. These laser outputs were combined by a homemade incoherent fiber signal combiner with low loss, yielding a maximum peak power of ~6.0 kW in a beam with $M^2{\approx}12.5$. The detailed laser characteristics and prospects for further power scaling in QCW operation are discussed.

• Korean Journal of Microbiology
• /
• v.50 no.2
• /
• pp.158-163
• /
• 2014

In the acidic LB plate, a bacterial strain was isolated from homemade soybean paste as a producer of the extracellular mannanase. The isolate YB-1402, which was a Gram-positive rod-shaped bacterium with spore, has been identified as Bacillus amyloliquefaciens on the basis of its 16S rDNA sequence and biochemical properties. Maximum mannanase productivity of the isolate YB-1402 was reached approximately 150 U/ml in LB broth supplemented with konjac (3.0%). The molecular mass of YB-1402 mannanase was estimated to approximately 38.0 kDa by zymogram of the culture filtrate on SDS-PAGE. The mannanase of culture filtrate was the most active at $55^{\circ}C$ and pH 5.5. The mannanase activity was completely maintained after pre-incubation at pH 3.0 to 10.0 for 1 h. The predominant products resulting from the mannanase hydrolysis were mannose, mannobiose and mannotriose for LBG or mannooligosaccharides. The enzyme could hydrolyze mannooligosaccharides larger than mannobiose.

• Microbiology and Biotechnology Letters
• /
• v.43 no.3
• /
• pp.204-211
• /
• 2015

A bacterial strain capable of hydrolyzing xylan and locust bean gum (LBG) was isolated from the Saemangeum tideland of Korea. Based on the biochemical properties and the 16S rRNA gene sequence, the isolate YB-30 was identified as Bacillus subtilis. Xylanase productivity was increased effectively when B. subtilis YB-30 was grown in the presence of wheat bran, while mannanase productivity was increased drastically when grown in the presence of konjac or LBG. Particularly, maximum mannanase and xylanase activities were detected in the culture filtrate of media containing 3.5% konjac and 1% wheat bran. Both enzyme productivities reached maximum levels in the stationary growth phase. The culture filtrate exhibited the highest activity at 60℃ and pH 6.0 for mannanase and at 55℃ and pH 5.5 for xylanase, respectively. Both enzymes were not stable at high temperatures and xylanase was less stable than mannanase. In addition, wheat bran was hydrolyzed to liberate reducing sugar to a greater extent than rice bran by the culture filtrate because the wheat bran contained more arabinoxylan than the rice bran. Hence, xylanase and mannanase produced by B. subtilis YB-30 have a potential use as feed additive enzymes.

• Korean Journal of Materials Research
• /
• v.26 no.12
• /
• pp.757-763
• /
• 2016

$Ho^{3+}/Yb^{3+}/Tm^{3+}$ tri-doped $NaY_{1-x}(WO_4)_2$ phosphors with proper doping concentrations of $Ho^{3+}$, $Yb^{3+}$ and $Tm^{3+}$ ($x=Ho^{3+}+Yb^{3+}+Tm^{3+}$, $Ho^{3+}$=0.04, 0.03, 0.02, 0.01, $Yb^{3+}$=0.35, 0.40, 0.45, 0.50 and $Tm^{3+}$=0.01, 0.02, 0.03, 0.04) were successfully synthesized via the microwave sol-gel route, and their upconversion properties were investigated. Well-crystallized microcrystalline particles showed fine and homogeneous microcrystalline morphology with particle sizes of $1-2{\mu}m$. The optical properties were comparatively examined using photoluminescence emission and Raman spectroscopy. Under excitation at 980 nm, the doped particles exhibited white emissions based on blue, green and red emission bands, which correspond to the $^1G_4{\rightarrow}^3H_6$ transitions of $Tm^{3+}$ in the blue region, the $^5S_2/^5F_4{\rightarrow}^5I_8$ transitions of $Ho^{3+}$ in the green region, the $^5F_5{\rightarrow}^5I_8$ transitions of $Ho^{3+}$, and the $^1G_4{\rightarrow}^3F_4$ and $^3H_4{\rightarrow}^3H_6$ transitions of $Tm^{3+}$ in the red region. The pump power dependence of the upconversion emission intensity and the Commission Internationale de L'Eclairage chromaticity coordinates of the phosphors were evaluated in detail.

• Microbiology and Biotechnology Letters
• /
• v.31 no.2
• /
• pp.151-156
• /
• 2003

A strain YB-10 was isolated from soil as a producer of the extracellular $\beta$-D-galactosidase, which catalyzes the hydrolysis of lactose. The strain YB-10 was identified as Streptomyces sp. on the basis of its cultural, morphological and physiological properties. After treating culture supernatant of the isolate with ammonium sulfate, the precipitated protein was used as a crude $\beta$-galactosidase for analyzing its reaction properties with para-nitrophenyl-$\beta$-D-galactosidase(pNP-$\beta$Gal) as a substrate. The $\beta$-galactosidase showed its maximal activity at pH 6.0 and 6$0^{\circ}C$. The enzyme was also active on lactose. The hydrolyzing activity of $\beta$-galactosldase for pNP-$\beta$Gal and lactose was decreased by galactose. Its hydrolyzing activity far lactose was also decreased by glucose, but the activity for pNP-$\beta$Gal was increased to 1.8-folds by glucose.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.1
• /
• pp.11-14
• /
• 2009

Yb and Zn co-doped $LiNbO_3$ single crystal rods which had a diameter of 2 mm and a length of $15{\sim}25 mm$ were grown by micro-pulling down (${\mu}-PD$) method. The single crystals were successfully grown and had a uniform diameter and a smooth surface without crack. We realized of $LiNbO_3$ single crystals were hexagonal structure to compare with peaks of $LiNbO_3$ powder by Raman spectra. The threshold level of Zn concentration which is effective for optical damage were observed as about 1 mol% with IR transmission spectra.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.6
• /
• pp.241-245
• /
• 2007

[ $(Ba_{0.9-x}Sr_xCa_{0.10})TiO_3$ ] (x=0.33, 0.36) powders were prepared by sol-gel method. $(Ba,Sr,Ca)TiO_3$(BSCT) thick films, undoped and doped with $MnCO_3$ and $Yb_2O_3(0.1{\sim}0.7mol%)$, were fabricated by the screen printing method on the alumina substrate. The coating and drying procedure was repeated 6-times. The Pt bottom electrode was screen printing method on the alumina substrate. These BSCT thick films were annealed at $1420^{\circ}C$ for 2 hr in atmosphere. The upper electrodes were fabricated by screen printing the Ag paste and then firing at $590^{\circ}C$ for 10 min. And then the structured and dielectric properties as a function of the doping amount of $Yb_2O_3$ were studied. As a result of the TG-DTA, exothermic peak was observed at around $670^{\circ}C$ due to the formation of the polycrystalline perovskite phase. All BSCT thick films showed XRD patterns of typical cubic peroveskite structure. The average thickness of BSCT thick films was about $70^{\mu}m$. The curie temperature and the dielectric constant decreased with increasing $Yb_2O_3$ doped content and the relative dielectric constant of the specimen, doped with 0.5 mol% $Yb_2O_3$ at BSCT(54/36/10), showed a best value of 5018 at curie temperature.