• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.74.4-74
• /
• 2001

In this paper, we propose a row warehouse type container yard (WTCY) which deal with the excess of port´s container capacity in 2004 instead of using the Yangsan inland container depot (ICD) in Pusan container terminals. Because the off dock container yard (ODCY) which located in Pusan port around exceeds the port´s capacity in 2004, the Yansan ICD will be used for handling an overflowed amount of containers. But there are need an amount of extra expense includes social overhead capital (SOC) to transports containers to Yangsan ICD. To overcome this problem, a WTCY which can be handled the container in each floors is proposed. The proposed WTCY can be located in container terminal ...

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1166-1170
• /
• 2010

In the case of railway freight, there's a lot of process at railway freight terminal. In these days, for operation efficiency improvement, Load/Unload planning is being carried out research. Load/unload problem can be classified as track assignment, container assignment, yard truck route problem, unload equipment scheduling, container yard plan. In this paper, we focus on track assignment and container assignment among the load/unload problem. we analysis information architecture to solve this problem. And we compares two precesses for existing method and optimization method of track/container assignment processes. An contents different analysis of two methods can shows reformation of an information architecture for load/unload process in the railway freight terminal.

• Applied Microscopy
• /
• v.43 no.2
• /
• pp.98-101
• /
• 2013

In the present study, formation of yard and shell has been investigated in as-melt-spun $Gd_{30}Ti_{25}Al_{25}Co_{20}$ alloy using a variety of transmission electron microscopy techniques. The phase separation during cooling leads to the formation of the microstructure consisting of amorphous droplets with different size scales embedded in the amorphous matrix. Due to the interdiffusion at the interface after the first-step phase separation, ~50 nm-thick yard develops on the surface of the primary droplet particle. Due to the critical wetting phenomenon, ~5 nm thickness shell enveloping the droplet forms. The sell is enriched in Co and Ti, implying that the composition is close to that of the droplet.

• Journal of Korean Institute of Industrial Engineers
• /
• v.35 no.2
• /
• pp.129-140
• /
• 2009

This paper introduces the planar storage location assignment problem (PSLAP) that no research has attempted to mathematically solve. The PSLAP can be defined as the assignment of the inbound and outbound objects to the storage yard with aim of minimizing the number of obstructive object moves. The storage yard allows only planar moves of objects. The PSLAP usually occurs in the assembly block stockyard operations at a shipyard. This paper formulates the PSLAP using a mathematical programming model, but which belongs to the NP-hard problems category. Thus this paper utilizes an efficient genetic algorithm (GA) to solve the PSLAP for real-sized instances. The performance of the proposed mathematical programming model and developed GA is verified by a number of numerical experiments.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2005.06a
• /
• pp.165-170
• /
• 2005

The weight of a ship depends on the size of the ship. Normal lightweight of a ship is over 10,000 tons. So it is inevitable to divide a ship into about more than hundreds of lumps. Each of lumps is called as a block in shipbuilding. The sizes of blocks are decided by a yard's facilities. Among them lifting cranes are most decisive facilities. By block's size the productivity of a yard is decided very much. So it is very important to have a proper block division during shipbuilding. This paper refers to the recent trend of block division among yards. This paper would give an idea how to decide boundaries of blocks. Block division also decides both quality of a ship and work volume of it. These days the block erection method is changed dramatically due to use sea barge mounted crane for erection of a grand ring block. This paper explains the new trend of block division in shipbuilding.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.2
• /
• pp.278-281
• /
• 2008

Linear motor (LM) based shuttle cars will play an important role in the future transportation systems of marine terminals to cope with increasing container flows. These systems are known as agile port terminals because of their significant advantages. However, routing for multiple shuttle cars is still an open issue. We present a network model of a container yard and propose constrained dynamic programming (DP) for its routing strategy with collision avoidance. The algorithm is a modified version of typical DP which is used to find an optimal path for a single traveler. We evaluate the new algorithm through simulation results for three shuttle cars in a mesh-type container yard.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.154-155
• /
• 2019

항만 내 대표적인 하역장비로는 RTG와 YT가 있으며 주로 디젤엔진을 사용하고 있다. 항만의 그린화 및 무인화를 위해 물류장비의 전기동력 전환의 필요성 증가 및 전기동력 충전을 위한 유선 또는 무선 충전기술 등이 고려 되고 있다. 본 논문에서는 항만에서 운영되는 전기식 YT의 운영 패턴을 고려해 수시로 충전이 가능한 무선전력 전송시스템을 제안하였다. 또한 제안한 시스템의 검증을 위해 실험용 시스템을 구축하여 전력전송 용량 및 효율실험 결과를 통하여 타당성을 확인하였다.

• Journal of the Korea Society for Simulation
• /
• v.7 no.2
• /
• pp.91-104
• /
• 1998

This paper describes the simulation study which evaluates operation plans of container terminal. The operation plans of container terminal consist of berth plan, load plan, unload plan, yard plan, and equipment plan. It is discussed how to apply the simulation method to evaluate those plans that are interrelated with each other. This paper also deals with the assignment and coordination problems of container-handing equipment such as container cranes, transfer cranes, yard tractors, and trailers used in the transportation of containers. Simulation analysis is bases on data about plans from the operation planning system through an interface program. It is discussed what we should got the statistics about container-handing equipment in the simulation.

• Journal of the Korea Society for Simulation
• /
• v.14 no.3
• /
• pp.109-118
• /
• 2005

The purpose of this paper is to analyze transport ability of AGV(Automated Guided Vehicle) and SHC(SHuttle Carrier). The main difference between two types of transport vehicles is that AGV depends on container crane or transfer crane to do loading/unloading container, but SHC is very independent to it. Therefore, the transport ability of SHC is expected to be higher than AGV. So, in this paper, we established simulation model to evaluate two types of transport vehicles and analyzed the results. Simulation model was established to automated container terminal with perpendicular yard layout, and applied closed loop operation of transport vehicle between apron and stacking yard. In the result, SHC showed very superior than AGV aspect of container crane productivity and vehicle fleets.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2005.05a
• /
• pp.57-63
• /
• 2005

The purpose of this paper is to analyze transport ability of AGV(Automated Guided Vehicle) and SHC(SHuttle Carrier). The main difference between two types of transport vehicles is that AGV depends on container crane or transfer crane to do loading/unloading container, but SHC is very independent to it. Therefore, the transport ability of SHC is expected to be higher than AGV, So, in this paper, we established simulation model to evaluate two types of transport vehicles and analyzed the results. Simulation model was established to automated container terminal with perpendicular yard layout, and applied closed loop operation of transport vehicle between apron and stacking yard. In the result, SHC showed very superior than AGV aspect of container crane productivity and vehicle fleets,