• Electrical & Electronic Materials
• /
• v.7 no.4
• /
• pp.289-293
• /
• 1994

Thin films of YB $a_{2}$C $u_{3}$$O_{7-x}$ supercondYB $a_{2}$C $u_{3}$$O_{7-x}$uctor were prepared on (100) SrTi $O_{3}$ substrates by pulsed laser deposition using visible light laser. Q-switched Nd:YAG(532 nm, 30 ns) pulsed laser was used for deposition. The effects of substrate temperature and oxygen pressure during deposition on films were studied. Critical current density of 2.93*10$^{6}$ A/c $m^{2}$ at 77K and Tc(zero)=91.7K were obtained from the film prepared with Tsub=745.deg. C and $P_{02}$=200 mTorr. XRD analysis showed that the grown film has c-axis normal orientation to the substrate surface and has single phase. Surface morphology of the film has been improved by interfering the plume ejected from YB $a_{2}$C $u_{3}$$O_{7-x}$ target.arget.t.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.3
• /
• pp.190-197
• /
• 2008

It was experimentally studied that the stabilization mechanism of turbulent, lifted jet flames in a non-premixed condition to reveal the newly found liftoff height behavior of hydrogen jet. The objectives are to report the phenomenon of a liftoff height decreasing as increasing fuel velocity, to analyse the flame structure and behavior of the lifted jet, and to explain the mechanisms of flame stability in hydrogen turbulent non-premixed jet flames. The hydrogen jet velocity was changed from 100 to 300m/s and a coaxial air velocity was fixed at 16m/s with a coflow air less than 0.1m/s. For the simultaneous measurement of velocity field and reaction zone, PIV and OH PLIF technique was used with two Nd:Yag lasers and CCD cameras. As a result, it was found that the stabilization of lifted hydrogen diffusion flames is correlated with a turbulent intensity and Karlovitz number.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2444-2447
• /
• 2008

A new 3D-PTV algorithm (a Volume PTV) based upon a hybrid fitness function has been constructed. A coherency fitness function is introduced using the information of space and time to sort out the correct particle pairs between the two camera images. The measurement system consists of two-high-definition-cameras($1k{\times}1k$), a Nd-Yag laser and a host computer. The developed algorithm has been employed to investigate the flow features of the cylinder wake. The Reynolds numbers with the cylinder diameter (d=10mm) are 360, 720, 900 and 1260. Two-dimensional displacements of the particles of each camera's image and neighbouring constraints were introduced to reduce the calculation loads. More than 10,000 instantaneous 3D vectors have been obtained by the constructed algorithm. The constructed algorithm could recover more than $80{\sim}90%$ of the particle numbers in the image.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.09a
• /
• pp.251-265
• /
• 2000

S $m_{2}$F $e_{17}$ $N_{x}$ film magnets using a S $m_{2}$F $e_{17}$ target were prepared at $N_{2}$ gas atmosphere using a Nd-YAG laser ablation technique. The effect of nitrogen pressure, deposition temperature, pulsation time and film thickness on the structure and magnetic properties of S $m_{2}$F $e_{17}$ $N_{x}$ film were studied. Increasing the nitrogen pressure up to 5 atm. was confirmed to lead the formation of complete S $m_{2}$F $e_{17}$ $N_{x}$ compound. Optimized magnetic properties with the nitrogenation temperature ranging over 500-53$0^{\circ}C$ could be obtained by extending the nitrogenation time up to 4 hours. Relatively low coercivities of 400~600 Oe were exhibited from the S $m_{2}$F $e_{17}$ $N_{x}$ films having the thickness of 50~100 nm while 4$\pi$ $M_{s}$ of 10~12 kG could be achieved. In-plane anisotropic characteristic, which was the basic goal in this study, was achieved by controlling the nitrogenation parameters.ameters.ers.ameters.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.611-616
• /
• 2004

In this study, microfabrication of a micro-arcjet nozzle with Fifth-harmonic generation Nd：YAG pulses (wavelength 213 nm) and its thrust performance tests were conducted. A micro-arcjet nozzle was machined in a 1.2 mm thick quartz plate. Sizes of the nozzle were 0.44 mm in width of the nozzle exit and constrictor diameter of 0.1 mm. For an anode, a thin film of Au (~100 nm thick) was deposited by DC discharge PVD in vacuum on divergent part of the nozzle. As for a cathode, an Au film was also coated on inner wall surface. In operational tests, a stable discharge was observed for mass flow of 1.0mg/sec, discharge current of 6 ㎃, discharge voltage of 600 V, or 3.6 W input power (specific power of 3.6 MW/kg). In this case, plenum pressure of the discharge chamber was 80 ㎪. With 3.6 W input power, thrust obtained was 1.4 mN giving specific impulse of 138 sec with thrust efficiency of 24 %.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.41.1-41.1
• /
• 2009

최근 금형은 자동차뿐만 아니라 여러 산업에서 필수적이며 제품의 품질은 물론 제조원가에 막대한 영향을 미친다. 이러한 금형은 침탄, 질화, 고주파담금질등에 의해 표면처리 되어져 왔으나, 이와 같이 기존의 처리 방법은 모두 처리물 전체를 가열하거나 균일한 가열을 하지 못하기 때문에 변형의 문제와 처리후의 후가공의 경비 문제, 그리고 극히 일부분만 경화가 필요한 부품에는 적용하기 어려운 문제점이 있다. 이러한 문제를 해결할 수 있는 표면처리로서 레이저 표면처리 방법이 대두되고 있으며, 레이저 표면처리는 레이저 빔을 피처리물의 표면에 조사하고 적당한 속도로 이동을 하게 되면 레이저조사부위가 급속하게 가열되고 레이저빔이 통과한 후에는 표면의 열이 내부로 열전도 되어 급속히 자기냉각(Self-quenching)됨으로서 표면에 새로운 기계적 성질을 갖게 하는 표면처리법이다. 이와 같이 레이저를 이용한 표면처리로 기존의 CW Nd:YAG 레이저 열원보다 효율이 좋은 HPDL(High Power Diode Laser)를 이용한 고효율, 고기능 금형 표면처리 후 재료적 물성을 평가하고자 한다. 평가방법은 레이저빔의 조사속도 및 온도변화에 따른 표면처리부, 열영향부 그리고 모재 부분에 대한 경도특성 및 미세조직 변화를 관찰하였다. 또한 조사속도 및 온도변화에 대해 경화깊이를 관찰하였다.

• Nuclear Engineering and Technology
• /
• v.49 no.4
• /
• pp.865-872
• /
• 2017

For more than 10 years, the laser process has been studied for dismantling work; however, relatively few research works have addressed the effect of high-power fiber laser cutting for thick sections. Since in the nuclear sector, a significant quantity of thick material is required to be cut, this study aims to improve the reliability of laser cutting for such work and indicates guidelines to optimize the cutting procedure, in particular, nozzle combinations (standoff distance and focus position), to minimize waste material. The results obtained show the performance levels that can be reached with 10 kW fiber lasers, using which it is possible to obtain narrower kerfs than those found in published results obtained with other lasers. Nonetheless, fiber lasers appear to show the same effects as those of $CO_2$ and ND:YAG lasers. Thus, the main factor that affects the kerf width is the focal position, which means that minimum laser spot diameters are advised for smaller kerf widths.

• Korean Journal of Bronchoesophagology
• /
• v.14 no.2
• /
• pp.10-16
• /
• 2008

Surgical resection and reanastomosis has been the treatment of choice in patients with tracheobronchial stenosis. Recent development of bronchoscopic intervention has been replacing the role of surgery in these patients. After summarizing the upto date data of bronchoscopic intervention, the proper management of tracheobronchial stenosis will be presented. Bronchoscopic intervention would be much effective when performed under rigid bron- choscopy, due to the stable patients' condition and endoscopic view. The usual method of intervention includes ballooning, Nd-YAG laser resection, bougienation, mechanical airway dilatation, stenting and photodynamic therapy. Silicone stents are very effective in patients with tracheobronchial stenosis to maintain airway patency. Bronchoscopic intervention provided immediate symptomatic relief and improved lung function in most of patients. After airway stabilization, stents were removed successfully in 2/3 of the patients at a 12-18 months post-insertion. Less than 5% of patients eventually needs surgical management. Acute complications, including excessive bleeding, pneumothorax, and pneumomediastinum develops in less than 5% of patients but managed without mortality. Stent-related late complications, such as, migration, granuloma formation, mucostasis, and restenosis are relatively high but usually controlled by follow-up bronchoscopy. In conclusion, bronchoscopic intervention, including silicone stenting could be a useful and safe method for treating tracheobronchial stenosis.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1673-1681
• /
• 2018

In this paper, the fabrication of a white light-emitting diode (WLED) package capable of producing different color rendering indexes (CRI ($R_a$)) using different types of phosphors (YAG:Ce, Silicate, Nitride, LuAG) for the LEDs is presented. The color quality is evaluated based on the current and temperature variation conditions. The evaluation method for color quality compares the existing CIE 13.3 method and the new IES TM-30-15 method. The CRI ($R_a$) defined in the conventional CIE 13.3 has the disadvantage. This cannot offer any information relevant to the user's preference. However, the newly proposed IES TM-30-15 method suggests the additional measure related to user's preference such as Color Gamut ($R_g$). The present experimental results obtained using the IES TM-30-15 show that the color quality of the WLEDs using green and red phosphors are better than that of the WLEDs using yellow phosphor, but their luminous efficacies are lower. The color quality of WLEDs using green and red phosphors are more stable than that of the WLEDs using yellow phosphor, for current and temperature variations, and it is verified that the phosphor causes this change. The evaluation method for color quality, based on IES TM-30-15, is proved to be capable of overcoming the problems of the existing evaluation methods by this study.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.30 no.3
• /
• pp.30-38
• /
• 2016

In this research, a 6W white LED package with a Glass Remote Phosphor was developed to improve the life of an LED package. The Glass Remote Phosphor was fabricated by the Phosphor in Glass (PiG) method, wherein phosphor YAG:Ce was mixed with glass frit and then heat treated. A paste with 75wt.% of a phosphor substance and 25wt.% glass frit was coated on a glass substrate two times using the screen-printing technique and heat-treated at $800^{\circ}C$ ; this structure gave a luminous efficacy of 136.1lm/W, color rendering index of 74Ra, and color temperature of 5,342K, thus satisfying the requirements as a light source for lighting. Moreover, an IES LM-80 accelerated life test was conducted on the same LED package for 6,000h in order to estimate the L70 lifetime based on IES TM-21. The results showed guaranteed lifetimes of 213,000h at $55^{\circ}C$, 245,000h at $85^{\circ}C$, and 209,000h at $95^{\circ}C$.