• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2005년도 High Temperature Superconductivity Vol.XV
• /
• pp.100-100
• /
• 2005

• Progress in Superconductivity
• /
• 제13권1호
• /
• pp.34-39
• /
• 2011

본 연구를 통해서 초전도 선재 시료의 국소적인 영역에 대한 전류 밀도의 공간적인 분포를 시료의 손상 없는 비파괴적인 방법으로 LTSHPM을 통해서 1차원 2차원으로 형상화해 보았다. 그 결과 외부자기장에 의한 차폐전류의 흐름을 분석할 수 있었다. 또한 MPMS에서 외부자기장에 따른 자기모멘트를 측정한 결과와 LTSHPM을 통해 전류 밀도 분포를 분석한 결과를 비교해 볼 때 외부자기장에 의한 반자성의 크기와 자기모멘트로 인해 생기는 차폐전류가 100 Oe에서 최댓값을 가지는 일치하는 결과를 얻을 수 있었다. 그리고 세 가지의 평행한 브릿지에 흐르는 차폐전류를 2차원적으로 분석해 본 결과 시료 전체적으로 가장 바깥쪽으로 차폐전류가 흐르는 공통점을 확인해 볼 수 있었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권4호
• /
• pp.39-43
• /
• 2013

To reduce the magnetization loss of a coated conductor, the striation and the transposition have to be accomplished for magnetic decoupling. The loss reduction effect in incomplete as well as complete striated YBCO CCs was reported in previous research. At the case of the incomplete striated sample, the end region of the sample is non-striated. So, it is not jointed with each other. In power applications, the joint is needed because current leads must be connected with HTS coils. In this research, the influence of end-joint methods with copper and superconducting joint on magnetization loss in striated YBCO CC and spiral winding samples are presented and compared with non-striated measured result.

• Progress in Superconductivity
• /
• 제7권2호
• /
• pp.135-139
• /
• 2006

We fabricated YBCO coated conductors (CCs) by TFA-MOD process and evaluated microstructure, texture formation, and critical temperature ($T_c$) and current ($I_c$). YBCO precursor solution was synthesized using metal-trifluoroacetates and dip coated on $LaAlO_3$(LAO) substrate. The phase formation and microstructure was characterized by X-ray diffraction and scanning electron microscopy (SEM) and the degree of texture was evaluated by pole-figure analysis. The CC was heat-treated in various calcining temperatures ($370^{\circ}C-460^{\circ}C$) and firing temperatures ($750^{\circ}C-800^{\circ}C$). As fired at $775^{\circ}C$ for 4h, the CC had the highest $T_c$ of 89.5 K and $I_c$ of 40 A/cm-width ($J_c=2.0\;MA/cm^2$). Microstructural observation indicated that the YBCO film was dense and homogeneous and had a strong cube texture without formation of second phase and its in-plane full-width at half-maxima; $5.2^{\circ}$ under optimum condition.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.806-807
• /
• 2008

2세대 고온초전도 선재는 전기적, 기계적 특성이 1세대 고온초전도 선재보다 더 우수하지만, 1세대 고온초전도 선재보다 더 높은 교류손실 밀도를 발생시킨다는 단점이 있다. 본 논문에서는 2세대 초전도 선재인 박막형 YBCO CC(Coated Conductor)에서 발생하는 교류 손실을 감소하기 위한 방법으로 선재의 초전도층을 분할하여 단면의 종횡비를 줄이는 방법을 제안하였으며, 실제로 제작 및 특성 측정을 통해 제안된 방법의 타당성을 보였다. 박막형 선재의 초전도층을 분할하기 위해 포토마스킹을 이용한 에칭 방법을 이용하였다. 샘플의 제작을 위해 안정화층이 없는 폭 12mm 의 YBCO CC를 사용하여 샘플의 길이는 15cm로 하고 선재의 분할수를 다르게 하여 각 샘플에 대한 자화 손실과 각 소선의 임계전류를 측정한 후 선재의 전기적 특성 변화를 알아보았다.

• Progress in Superconductivity
• /
• 제8권1호
• /
• pp.27-32
• /
• 2006

[$YBa_2Cu_3O_{7-x}$] thin films were deposited on various buffered-templates by a metal organic chemical vapor deposition(MOCVD). Three different templates of $CeO_2/YSZ/CeO_2/pure-Ni(CYC),\;CeO_2/YSZ/Y_2O_3/Ni-3at.%W(YYC)$ and $CeO_2/IBAD-YSZ$/stainless steel were used. The Ni and Ni-W alloy tapes were biaxially textured by cold rolling and annealing heat treatment. The dense YBCO films were grown on both the IBAD and YYC templates with no microcrack, while the YBCO films on the CYC templates were grown with the formation of microcracks and NiO. The YBCO film on the YYC template showed the higher $I_c$ than that on CYC template. Especially, the IBAD templates with a thin $CeO_2$(type I) and thick $CeO_2$(type II) top layer were used to compare the deposition nature of the YBCO on them. Comparing the current property of the YBCO films on IBAD templates, the YBCO film deposited on thick $CeO_2$ layer was better than the film on thin $CeO_2$ layer.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2006년도 High Temperature Superconductivity Vol.XVI
• /
• pp.7-7
• /
• 2006

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2003년도 High Temperature Superconductivity Vol.XIII
• /
• pp.86-86
• /
• 2003

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권2호
• /
• pp.24-28
• /
• 2013

In this study, the homogeneity of critical current, $I_c$, along the lengthwise direction in the coated conductor (CC) tape under uniaxial tension was investigated using a multiple voltage tap configuration. Initially, a gradual and homogeneous $I_c$ degradation occurred in all subsections of the tape up to a certain strain value. This was followed by an abrupt $I_c$ degradation in some subsections, which caused scattering in $I_c$ values along the length with increasing tension strain. The $I_c$ degradation behaviour was also explained through n-value as well as microstructure analyses. Subsections showed $I_c$ scattering corresponding to damaged areas of the CC tape revealed that transverse cracks were distributed throughout the gauge length. This homogeneous $I_c$ degradation behaviour under tension is similar with the case under torsion strain but different with the case under hard bending which were previously reported. This behaviour is also different with the case using Bi-2223 HTS tapes under tension strain.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2004년도 High Temperature Superconductivity Vol.XIV
• /
• pp.93-93
• /
• 2004