• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.11a
• /
• pp.158-160
• /
• 2001

본 연구는 레이저 처리기술에 의한 Li$_2$O-A1$_2$O$_3$-SiO$_2$계 유리의 미세가공과 레이저에 의한 유리의 광활성반응에 관한 것으로서, 1064nm와 355nm의 파장을 갖는 Nd:YAG laser를 유리에 조사하여 유리의 파괴특성 및 광학적변화를 관찰하였다. 1064nm 레이저에 의한 유리의 파괴 부분은 광학현미경과 주사전자현미경(SEM)으로서 파괴특성을 평가하였으며, 355nm 레이저에 의한 유리의 변화는 흡수대역을 측정함으로 그 광학적 특성을 나타내었다. 이와 같은 레이저에 의한 가공은 유리내부의 3차원적인 미세구조물 형성이나, internal waveguide, 또는 광 흡수대역의 변화에 따른 광기록방법으로 응용될 것으로 예상된다.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.07a
• /
• pp.104-109
• /
• 2001

A 355 nm (3.5 eV) neodymium:yttrium aluminum gamet laser, produced by a harmonic generator, was used to create silver metallic particles as seeds for nucleation in photosensitive glass containing Ag+ and Ce3+ ions. The pulse width and frequency of the laser were 8 ns and 10 Hz, respectively. Heat treatment was conducted at 570 C for 1 h, following laser irradiation, to produce crystalline growth, after which a LiAlSi3O8 crystal phase appeared in the laser-irradiated Li2O A1203 SiO2 glass. For the Present study, we compared the effect of laser-induced crystallization on glass crystallization with that of spontaneous crystallization by heat treatment.

• Coupled systems mechanics
• /
• v.7 no.5
• /
• pp.627-634
• /
• 2018

Laser beam welding is more advantageous compared to conventional methods. Titanium/Aluminium dissimilar alloy thin sheet metals are difficult to weld due to large difference in melting point. The performance of the weldment depends upon interlayer formation and distribution of intermetallics. During welding, aluminium gets lost at the temperature below the melting point of titanium. Therefore, it is needed to improve a new metal joining techniques between these two alloys. The present work is carried for welding TI6AL4V and AA2024 alloy by using Nd:YAG Pulsed laser welding unit. The performance of the butt welded interlayer structures are discussed in detail using hardness test and SEM. Test results reveal that interlayer fracture is caused near aluminium side due to low strength at the weld joint.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.3
• /
• pp.365-370
• /
• 2004

Simultaneous measurement with PLIF(Planar Laser-Induced Fluorescence) and Stereo-PIV(Stereo Particle Image Velocimetry) was performed to investigate the structural characteristics of flow field in Rushton Turbine Mixer. Instantaneous 3D velocity fields are measured by two 2K${\times}$2K CCD cameras focused on an object plane with the angular displacement methods while the concentration fields are obtained through the measurement of the fluorescence intensity of Rhodamine B tracer excited by the second pulse of Nd:Yag laser light. Image distortion due to the camera view-angle is compensated by a mapping function. Finally, the spatial structures of turbulent flow around Rushton turbine were identified by the calculation of synchronized data of the velocity field and concentration field.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.644-646
• /
• 2004

We have investigated luminescence properties of Ln-SiAlON materials doped with $Ce^{3+}$. Low-energy 4f${\leftrightarrow}$5d transitions were observed as compared to the luminescence of this ion doped in oxidic host-lattices.$^1$ Ce-doped Y-a-SiAlON show bright long wavelength luminescence with high absorption for 305 and 455nm excitation. In our experiment, the sintering temperature of this material(1400$^{\circ}C$) was lower than that of normal sintering temperature (1700$^{\circ}C$). However, Single phase of SiAlON was not composed we observed the YAG phase.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.676-678
• /
• 2004

In order to develop new yellow phosphor that emit efficiently under the 450 - 470 nm excitation range, we have synthesized a $Eu^{2+}$-activated $Sr_3SiO_5$ yellow phosphor and investigated an attempt to develop white LEDs by combining it with a InGaN blue LED chip (460 nm). Two distinct emission bands from the InGaN-based LED and the $Sr_3SiO_5$:Eu phosphor are clearly observed at 460 nm and at 570 nm, respectively. These two emission bands combine to give a spectrum that appears white to the naked eye. Our results showed that InGaN (460 nm chip)-based $Sr_3SiO_5$:Eu exhibits a better luminous efficiency than that of the industrially available product InGaN (460 nm chip)-based YAG:Ce.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04a
• /
• pp.125-128
• /
• 2000

ZnO thin films on silicon substrates have been deposited by pulsed laser deposition technique(PLD). A Nd:YAG laser was used with the wavelength of 355 nm. In order to investigate the effect of oxygen post-annealing treatment on the property of ZnO thin films, deposited film has been annealed at the substrate temperature of $440^{\circ}C$. After post-annealing treatment in the oxygen ambient, the stoichiometry of ZnO film has been characterized be improved which results in higher UV emission intensity of photoluminescence.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.6
• /
• pp.551-557
• /
• 2002

Carbon nitride films have been deposited on Si(100) substrate by a high voltage discharge plasma combined with laser ablation in a nitrogen atmosphere. The films were grown both with the without the presence of an assisting focused Nd:YAG laser ablation. The laser ablation of the graphite target leads to vapor plume plasma expending into th ambient nitrogen arc discharge area. X-ray photoelectron spectroscopy and Auger electron spectroscopy were used to identify the binding structure and the content of the nitrogen species in the deposited films. The nitrogen content of the films was found to increase drastically with an increase of nitrogen pressure. The surface morphology of the films was studied using a scanning electron microscopy. Data of infrared spectroscopy and x-ray photoelectron spectroscopy indicate the existence of carbon-nitrogen bonds in the films. The x-ray diffraction measurements have also been taken to characterize the crystal properties of the obtained films.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.4
• /
• pp.60-67
• /
• 2005

Compared with conventional welding, laser spot welding offers a unique combination of high speed, precision and low heat distortion. This combination of advantages is attractive for manufacturing industries including automotive and electronics companies. In this paper, a real time monitoring scheme fur a pulsed Nd:YAG laser spot welding was suggested. Acoustic emission (AE) signals were collected during welding and analyzed for given process conditions such as laser power and pulse duration. A back propagation artificial neural network, with AE frequency content inputs, was used to predict the weldability of stainless steel sheets.

• Journal of ILASS-Korea
• /
• v.13 no.3
• /
• pp.149-155
• /
• 2008

An experimental study was performed to understand spray characteristics of the rotary atomizer for the slinger combustor. In this fuel injection system, fuel is injected and atomized in the combustor by centrifugal forces to engine shaft. The experimental apparatus consists of a high speed rotational spindle, rotary atomizer, pressure tank and acrylic case. The droplet size and velocity were measured by PDPA (phase Doppler particle analyzer), and spray was visualized by using high speed camera and Nd:Yag laser-based flash photography. From the test results, the droplet size (SMD) is largely affected by rotational speed, mass flow rate and the number of orifice. As the experimental results, we could understand the spray characteristics of the rotary atomizer for the slinger combustor and obtain the optimum shape of the rotary atomizer which is suitable for the small gas turbine engine.