• Management & Information Systems Review
• /
• v.22
• /
• pp.211-229
• /
• 2007

The ISO/TS16949 APQP goal of defect prevention and decrease of spread waste, is the customer satisfaction which leads a continuous improvement and profit creation. The quality expense where the most is caused by but with increase of production initial quality problem occurrence is increasing to is actuality. Like this confirmation amendment. with the problem which is forecast in the place development at the initial stage which it does completeness it does not confront not to be able, production phase to be imminent, the problem accumulates and it talks the development shedding of which occurs. In opposition, prediction confrontation. is forecast in development early stage to and it is a structure which does not occur a problem to production early stage. Like this development is a possibility of accomplishing competitive company from production phase. Which attains an goal of, chance cause it leads a APQP activity (common cause) with special cause prevention & detection the connection characteristic of the focus technique against a interaction is important. And the customer requirement satisfaction and must convert a APQP goal of attainment at the key characteristics action step. (1) The Prevention - with Design FMEA application prevention of the present design management/detection, (2) the Detection (prevention/detection) - with Process FMEA application prevention of the present process control/detection, (3) Special Cause - statistical process control (SPC) 4M cause spread removal, (4) Common Cause - statistical process control (SPC) the nothing zero defect which leads the continuous improvement back of spread with application it will be able to attain with application.

• Journal of the Korean Ceramic Society
• /
• v.54 no.3
• /
• pp.211-216
• /
• 2017

ZnO nanopowder was synthesized using a relatively facile and convenient glycol process. ZnO nanopowder was successfully synthesized at temperatures as low as $125^{\circ}C$ using zinc acetate as the Zn source and 1,4-butanediol as the solvent. Then, the effects of water content on the growth process and morphological evolution of ZnO powders were investigated using 1,4-butanediol and water as binary solvent mixtures. Using pure 1,4-butanediol at a temperature above $125^{\circ}C$, the prepared hexagonal ZnO nanopowder exhibited a quasi-spherical shape with average crystalline size of approximately 30 - 50 nm. It is also demonstrated that the morphology of ZnO powders can be controlled by the addition of various water content in 1,4-butanediol. With increasing water content, the morphologies of the ZnO powders changed sequentially from quasi-spherical to hexagonal plate and pyramid, and finally to hexagonal prismatic with a pyramidal tip. A sharp peak centered at 384 nm in the UV region and a weak broad peak in the visible region between 450 and 700 nm were shown in the room temperature PL spectra of the ZnO synthesized using the glycol process, regardless of the addition of water, suggesting that ZnO nanopowders with the best crystallinity were obtained under these conditions.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.4
• /
• pp.141-144
• /
• 2005

[ $(Y_{0.5}Sm_{0.25}Nd_{0.25})Ba_2Cu_3O_y$ ] [(YSN)-123] high $T_c$ composite superconductors with $CeO_2$ addition were systematically investigated by top seeded melt growth (TSMG) process in air atmosphere. A melt textured $NdBa_2Cu_3O_y$ (Nd-123) single crystal was used as a seed for achieving the c-axis alignment large grains perpendicular to the surface of (YSN)-123 composite oxides. The size of $(Y_{0.5}Sm_{0.25}Nd_{0.25})_2BaCuO_5$ [(YSN)211] nonsuperconducting inclusions of the melt textured (YSN)-123 samples with $CeO_2$ addition were remarkably reduced and uniformly distributed within the (YSN)123 superconducting matrix except in the region very close to the Nd-123 seed crystal. The sample showed a sharp superconducting transition of 91 K.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.5
• /
• pp.188-192
• /
• 2005

High $T_c(Y_{0.5}Nd_{0.25}Sm_{0.25})Ba_2Cu_3O_y[(YNS)-123]$ superconductors with/without $CeO_2$ additive were systematically investigated by the zone melt growth process in air. Cylindrical green rods of (YNS)-123 oxides were fabricated by cold isostatic pressing (CIP) method using rubber mould. A sample prepared by this method showed well-textured microstructure, and $(Y_{0.5}Nd_{0.25}Sm_{0.25})_2BaCuO_5[(YNS)211]$ nonsuperconducting inclusions were uniformly dispersed in large $(Y_{0.5}Nd_{0.25}Sm_{0.25})Ba_2Cu_3O_y$[(YNS)123] superconducting matrix. In this study, optimum melting temperature and growth rate were $1100^{\circ}C$ and 3 mm/hr, respectively. The directionally melt-textured (YNS)-123 sample with $CeO_2$ additive showed an onset critical temperature $(T_c)\;T_c{\geq}93K$ and sharp superconducting transition.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.90-96
• /
• 1994

In this paper, an experiment about the fabrication method of superconductor was made in order to obtain crystal structure by making High T$\sub$C/, superconductor Y$_1$Ba$_2$Cu$_3$O$\sub$x/ to Y$_2$Ba$_1$Cu$_1$O$\sub$x/ of nonsuperconductor phase was added. 211 phase, which can approach crystal structure and growth-orientatoun, was used as seed in the 123 phase which shows the properties of superconductor. Therefore crystal growth effect was able to be attained. And the effect is expected to eleminate thin crack in the growth-process and to improve electrical properties by adding Ag to High T$\sub$c/ superconductor Y$_1$Ba$_2$Cu$_3$O$\sub$x/ combined with Y$_2$Ba$_1$Cu$_1$O$\sub$x/ .

• Journal of Environmental Science International
• /
• v.9 no.3
• /
• pp.261-266
• /
• 2000

A kinetic study for nitrate removal by anion exchange resin was performed using continuous column reactors. Kinetic approach from the packed bed showed the reaction rate constant k$_1$ was 0.07~0.17 $\ell$/mgㆍhr and maximum exchange quantity q$_{o}$ was 27.75~31.81 mg/g. The results from the continuous column well agreed with that from the batch reactor. An economic analysis of the water treatment plant by anion exchange resin with a regenerating system was performed to design plant and process. Based on the treatment of 20 mg/$\ell$ nitrate-contained wastewater of 10,000 gallons per day to 2 mg/$\ell$, total capital cost and total annual cost are estimated to be 836 million wons and 211 million wons, respectively.y.

• Korean Journal of Agricultural Science
• /
• v.38 no.1
• /
• pp.11-16
• /
• 2011

In this study, we report the generation and analysis of a total of 1,211 expressed sequence tags (ESTs) from Pinus koraiensis. A cDNA library was generated from the young leaf tissue and a total of 1,211 cDNA were partially sequenced. EST and unigene sequence quality were determined by computational filtering, manual review, and BLAST analyses. In all, 857 ESTs were acquired after the removal of the vector sequence and filtering over a minimum length 50 nucleotides. A total of 411 unigene, consisting of 89 contigs and 322 singletons, was identified after assembling. Also, we identified 77 new microsatellite-containing sequences from the unigenes and classified the structure according to their repeat unit. According to homology search with BLASTX against the NCBI database, 63.1% of ESTs were homologous with known function and 22.2% of ESTs were matched with putative or unknown function. The remaining 14.6% of ESTs showed no significant similarity to any protein sequences found in the public database. Gene ontology (GO) classification showed that the most abundant GO terms were transport, nucleotide binding, plastid, in terms biological process, molecular function and cellular component, respectively. The sequence data will be used to characterize potential roles of new genes in Pinus and provided for the useful tools as a genetic resource.

• The Journal of the Korea Contents Association
• /
• v.14 no.4
• /
• pp.211-226
• /
• 2014

The purpose of this research is to reveal the essential meaning of deviant peer through Phenomenological approach method on experiences of the teenagers. For an in-depth understanding of the experience world of the teenagers, researcher sought the essential meaning structure about the four Life-world Existentials of constructing human's live-world. Data had been collected through the researcher, the participants' observation, field note, content analysis, as well as in-depth interview "With them. Based on an analytical process of hermeneutical phenomenology of van Manen, researcher analysed essential meanings of the data in light of the four Existential categories through separating thematic statement, decision of essential theme and rewriting. The structure of the deviant peer experienced by the teenagers has been analyzed by the hermeneutical phenomenology so as to extract 28 composition meanings, 30 phenomenon and 18 structure of experience. The results examined by each theme are as follows. This study demonstrates that essential meaning structure of the study participants in the world is the experience of boundary, alert'.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.2
• /
• pp.211-216
• /
• 2018

Separation technology combining adsorption and membrane is expected to be applied in many fields such as water treatment. In this fusion technique, a functional carbon membrane having a carbon whisker grown on the surface of the membrane was developed to inhibit membrane fouling, which is a problem in the membrane separation process. In this study, to elucidate the mechanism of manufacturing the functional carbon membrane, the membrane was pretreated with the polymer latex of each mixing ratio and the membrane was formed by the CVD (Chemical Vapor Deposition) method. The membrane was analyzed by scanning electron microscope (SEM), CHN analyzer (Elemental Analyzer), and X-ray diffraction (XRD). As a result, the diameter and density of carbon whiskers were higher in case of polyvinyl di-chloride (PVdC): polyvinyl chloride (PVC) = 4.5: 55. It seems possible to control the diameter and density of the carbon whiskers according to the hydrogen content of the polymer latex.

• Journal of Korea Spatial Information System Society
• /
• v.5 no.1 s.9
• /
• pp.27-38
• /
• 2003

Recently, because of the extensive use of geographic information in the various fields, the requirement for the easy circulation and utilization of the various geographic information among the individuals, organizations, societies and countries is raised. In order to support the interoperability of the heterogeneous geographic information in the various fields, OGC(Open GIS Consortium) proposed the GML(Geography Markup Language) specification that defines the XML encoding rule about the heterogeneous geographic information. In addition, ISO/TC 211 adopted the GML specification to make it as the international standard. Therefore, in this paper we first analyzed the GML 3.0 specification in detail that can support the interoperability of the heterogeneous geographic information. And then we suggested and applied the mapping rule that define the encoding method to improve the encoding process easily and efficiently. Finally we designed and implemented the GML 3.0 encoding system using the mapping rule to encode the geographic information that was constructed in spatial databases into the GML 3.0 document. Especially, we used ZEUS as a spatial database system to test our encoding system in this paper.