• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.951-954
• /
• 2001

We investigated the aligning capabilities for nematic liquid crystal (NLC) using a in-situ photodimerization method on various photopolymer surfaces. High Pretilt angle of the NLC can be measured by obliquely polarized UV exposure of 30$^{\circ}$on a photo-crosslinkable polyimide (PI) based polymer surface for 3 min. The pretilt angle of the NLC generated on the photopolymer surface using the in-situ photodimerization method was higher than that of a blending photopolymers (PI and cinnamate materials).

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.37 no.4
• /
• pp.303-308
• /
• 2011

Lemon and eucalyptus oils were known to have various biological effects such as anti-aging and sterilizing action. However these essential oils were not well studied about their antioxidant activity and antimicrobial activity against specific skin flora. In this study, we investigated antioxidant activity and antimicrobial activity of lemon and eucalyptus oils by using DPPH radical scavening activity and paper disc method. Lemon oil showed the high DPPH scavenging activity, while eucalyptus oil did not. Blending oils of lemon and eucalyptus had little enhancememt onantioxidant activity. Paper disc method demonstrated that each oil had a high antimicrobial effect against C. albicans and P. acnes in a concentration dependent manner. The blending oils had enhancememt on antimicrobial effect against P. acnes. In conclusion, the blending oil of lemon and eucalyptus can be used as a more effective natural agents for cure of skin trouble and acne.

• Journal of the Korean Home Economics Association
• /
• v.50 no.7
• /
• pp.67-79
• /
• 2012

This study analyzed the characteristics of morphing in fashion design through the documentaries on morphing and fashion. The characteristics of morphing in fine art, media, and design area were categorized as reversible metamorphosis, sequential dissolve and blurring of interpolation boundaries. The results were as follow in fashion design. Reversible metamorphosis showed an automatic silhouette transformation by remote control, the metamorphosis of folding method by wearer's own movements and the automatic silhouette transformation by the air pressurizing method. It represented the thoughts of omnipotence as in the feeling of the magical world, the human desire for control in life, the rationalization of magical thinking and imaginative power, the creation of a new dress space and the extension of dress function. Sequential dissolve showed juxtaposition in the same area by the time order, juxtaposition in virtual space through the computer graphics, the series of fashion photography by steel cut of the dress making process and the blending of digital film and fashion design. It represented the approach for the storytelling of fashion show, implication of creative fashion design process and the creation of organic forms and the feeling of fantasy through artificial technology. The blurring of interpolation boundary showed an overlay of different fabrics with transparent boundaries, an overlay of different patterns with transparent boundaries and the blending of fabrics through the visual mixing of color. It represented the obfuscation of the object, the connotation of the space order, the connotation of the extensive and various meanings and the integrative property of objects.

• Journal of the Korean Society of Tobacco Science
• /
• v.33 no.1
• /
• pp.28-38
• /
• 2011

This experiment was conducted as a part of Asia collaborative study on purpose of verifying the difference between CM6 and CM7 including 3R4F for reference. It carried out using various analytical categories for example, main stream, sidestream and Av. smoke. Additional analysis such as physical properties, blending ratio, combustibility and general leaf component analysis also implemented in order to investigate the difference. We complied with ISO standard and CORESTA recommended method during analytical operating procedures. In this study, we described that comparative analytical result for CM6 and CM7 known as reference or monitoring cigarettes including 3R4F for reference. All sample cigarettes were conditioned at $22^{\circ}C$, 60% relative humidity for 48 hours. Av. Smoke, MS and SS smoke analysis were performed over five times with two smoking condition, ISO and Health Canada with the exception of Av. smoke analysis. We complied with ISO standard method during analytical operating procedures. And, we conducted additional analysis, such as physical properties, blending ratio, combustibility and leaf component analysis also in order to investigate the difference. In conclusion, we found out some differences between CORESTA monitoring cigarette No. 6 and No 7. The smoke components such as total particulate matters, NFDPM, nicotine and carbon monoxide contents of CM7 were a little lower than CM6. And, these phenomena were the same as not only main stream smoke but also side stream smoke and Av. smoke. This tendency was consistent with ISO and Health Canada smoking condition. Besides, leaf constituents' color of CM7 was darker than CM6. In case of combustibility, it showed short combustion time approximately 30 seconds.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1082-1082
• /
• 2001

Extrusion is one of the most important processes in polymer industry. The characterization of the polymer melt during processing will improve this process noticeably, One possibility of characterizing the actual processed polymer melt is the inline near infrared (NIR) spectroscopy, With this method several polymer properties can be observed during processing, e.g. composition, moisture ormechanical properties of the melt. For this purpose probes for transmission and reflection measurements have been developed, withstanding the high temperatures and pressures appearing during extrusion process (tested up to 300$^{\circ}C$ and 10 ㎫). For the transmission system an optical bypass was developed to eliminate disturbing spectral influences and hence increase the long term stability, which is the prerequisite for an industrial application. Measurements in transmission and reflection produced comparable results (or blending processes, where the prediction error was less than 1%. An optimum RMSEP of only 0.24% was found for preprocessed polymer blends measured in transmission on a laboratory extruder. A transflection measurement allowed for the first time the recording of relevant NIR-spectra in the screw area of an extruder. The application to a (PE+PP) blending process delivered promising results. This new measurement mode allows the observation of the ongoing processes within the screw area, which is of maximum Interest for reactive extrusion processes. Due to economic reasons the calibration transfer between different extrusion systems is also of high importance. Investigations on simulated and real-world spectra showed that a calibration transfer is possible. A new method alternatively to the well-known direct standardization procedures was developed, which is based on an automatic data pretreatment. This procedure delivers comparable results for the calibration transfer. Overall this paper presents concepts, components and algorithms for the inline near infrared (NIR) spectroscopy for polymer extrusion, which allows the use of it in a real industrial extrusion process.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.8
• /
• pp.1194-1205
• /
• 1999

The hand characteristics of bast blended fabrics are studied by a subective evaluation method. To offer basic data for development of better hand of bast fiber fabrics customer's hand preference surveys are executed as well. IN this study 51 varieties of linen or ramie blended fabrics of various blending ratio density and thickness and Hansan ramie Chinese ramie and a Shingosen fabics of various blending ratio density and thickness and Hansan ramie Chinese ramie and a Shingosen farbic and used. To evaluate the hand of the fabrics subjectively nine ranks' semantic differential scale questions of 26 items are developed with adjective pairs. A seven ranks' scale is also developed to evaluate hand preferences in blouse and jacket cloths, Through subjective evaluation of bast blended fabrics the 26 items could be classified into seven kinds of hand classification : surface characteristics extensibility/drapability felling of heaviness stiffness resilience moisture property and feeling of density. The cumulative variance value explained by these seven factors is 67.18% According to the results of fabrics' preference by age groups no significant differences are found in blouse cloths but a few significant differences are found among different age groups in jacket clothes. However experts and non-experts show considerable differences on preference It can be concluded that fabrics' preference I more dependent on professionality than on age. In the survey experts. However more drapery cloths are preferred by experts and cloths with drier touch are preferred by non-experts. Experts prefer rougher less even less winding heavier and sparser fabrics but non-experts prefer rougher lighter thinner and stiffer fabrics as jacket cloths.

• Structural Engineering and Mechanics
• /
• v.19 no.1
• /
• pp.43-53
• /
• 2005

The linearized buckling problem is considered for an isotropic clamped-clamped cylindrical shell with an oblique end. A theoretical solution based on the Budiansky shell theory is developed, and numerical results are determined using the differential quadrature method. In formulating the solutions, the surface of the shell is developed onto a plane, and the resulting irregular domain is then mapped, using blending functions, onto a square parent domain. The analysis is carried out in the parent domain. Convergence, validation, and parametric studies are conducted for a uniform external pressure loading. Results determined are compared with finite element results. The paper ends with an appropriate set of conclusions.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.510-512
• /
• 1999

In this paper, we present a method for the analysis and design of fuzzy controller for nonlinear systems. In the design procedure, we represent the dynamics of nonlinear systems using a Takagi-Sugeno fuzzy model and formulate the controller rules, which shares the same fuzzy sets with the fuzzy system, using parallel distributed compensation method. Then, after the feedback gain of each local state feedback controller is obtained using the existing optimal pole-placement scheme, we construct an overall fuzzy logic controller by blending all local state feedback controller. Finally, the effectiveness and feasibility of the proposed fuzzy-model-based controller design method has been evaluated through an inverted pendulum system.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.4
• /
• pp.1271-1278
• /
• 2000

A general curve and surface is a basic method to generate Free-form object using the fundamental properties of blending function. In typical method, there is an overhead of calculating to present Free-form object with the line segments and interpolation algorithm, In this paper, for resolving this problem efficiently, it will propose the flexible Free-form curves/surfaces using Ball curve shape-preserving property. This method includes Geometric Continuity that is needed to design Free-form Surface of high degree consisted with many curves. Also, when lots of data are reduced using Geometric Property of Free-form curves, the shape-preserving property of resulting object can be maintained, then it can represent any Free-form object with less calculating .

• Journal of Sensor Science and Technology
• /
• v.13 no.3
• /
• pp.244-251
• /
• 2004

In general, the braking system of high speed train has an important role for the safety of the train. To stop safely the train at its pre-decided position, it is necessary to combine properly the various brakes. Korean high speed train (HSR 350x) has adopted a combined electric and mechanic (friction) braking system. Electric brakes are consist of rheostatic brake, regenerative brake and eddy current brake and mechanical brakes are composed of disc brake, wheel disc brake and tread brake. In this paper, the measuring method that can take a measurement of the braking forces for disc brake and wheel disc brake has been suggested and we have verified that this method is valid through on-line test of HSR 350x.