• The Research Journal of the Costume Culture
• /
• v.6 no.3
• /
• pp.46-55
• /
• 1998

The purpose of this study was to develop the better fitting and more comfortable slacks pattern for women. 10 types of slacks pattern were made and worn compared with the sensory evaluations method. The main results of this study were as follows 1. Sensory evaluation for appearance; According to the result of means among the 10 slacks patterns, Type 2 method slacks was most satisfactory, and the next was the Type 4 slacks followed by Type 3, Type 5,6, Type 8, Type 1, Type 7, Type 9 Type 10 method slacks. 2. Sensory evaluation for comfort; The result of means showed that the Type 5 method slacks was most comfortable, and the next was the Type 3,8 slacks followed by Type 6,9 Type 7, Type 1,2,3, Type 10 method slacks.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.463-469
• /
• 2015

In this study, to improve bending strength performance of Korean white pine, we made the curved composite glulam that was reinforced with glass fiber materials and larch lamina. Five types of Korean white pine curved glulams were made depending on whether they had been reinforced or not and how they had been reinforced. Type-A, reference specimen, was produced only with Korean white pine lamina, and Type-B was with larch lamina in the same thickness. Type-C was made by inserting a glass fiber cloth of textile shape between the each layer. Type-D was reinforced with two glass fiber cloths, which were placed inside and outside of the outermost lamina. Type-E was reinforced with GFRP sheet in the same way as Type-D. As a result of this bending strength test, the modulus of rupture (MOR) of Type-B, Type-C and Type-E were increased by 29%, 6%, and 48% in comparison with Type-A. However, MOR of Type-D was decreased by 2% in comparison with Type-A. In the failure modes, Type-A, Type-B and Type-C were totally fractured at the maximum load. However, load values of Type-D and Type-E decreased slowly because of reinforcement of fracture suppression, and the GFRP sheet (Type-E) had better reinforcing effect on compressive stress and tensile stress than the glass fiber cloth (Type-D).

• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.1-14
• /
• 1994

Dental calculus which is calcifing and/or calcified dental plaque is divided into supragingival calculus and subgingival calculus according to the position of deposit to gingival margin. Subgingival calculus has more important clinical significance in diagnosis and treatment of periodontal disease than supragingival calculus. In order to investigate the deposition pattern of subgingival calculus on each root surface of different tooth type, extracted 192 teeth due to excessive destruction of periodontal tissue were divided according to tooth type and the deposition pattern of subgingival calculus was classified into linear type, veneer type, scattered type, and aggregated type according to the configuration and the extent of deposit. The difference of percentage between each deposition pattern was statistically analyzed by Chi-Square test. Following results were obtained : l. In maxillary incisors, linear type and aggregated type were predominant deposition pattern of subgingival calculus on labial(45.5%, 36.4%) and palatal(36.4%, 36.4%) root surface, aggreated type(72.7%) was on mesial surface, and aggregated type(54.5%) and scattered type(36.4%) was on distal suface. 2. In mandibular incisors, scattered type, linear type and aggregated type were predominant deposition pattern of subgingival calculus on labial(33.3%, 30.6%, 27.8%) and lingual(36.1%, 30.6%, 25.0%) root surface, aggregated type(33.3%), scattered type(27.8% ), and veneer type(27.8%) were on mesial surface, and aggregated type(38.9%) and scattered type(33.3%) on distal surface. 3. In maxillary peremolars, the predominant deposition patterns of subgingival calculus were linear type(28.6%) on buccal root suface, scattered type(35.7%) and linear type(28.6%) on palatal surface, scattered type(39.3%) on mesial surface, aggregated type(46.4%) on distal surface, and aggregated type(53.6%) on furcation area. 4. In mandibular premolars, scattered type was predominant deposition pattern of subgingival calculus on buccal(39.3%) and lingual(50.0%) root surface, scattered type(32.1%) and aggregated type(32.1% ) were on mesial surface, and aggregated type(42.9%) was on distal surface. 5. In maxillary molars, aggregated type(40.0%) and scattered type(32.5%) were predominat deposition pattern of subgingival calculus on buccal root surface, aggregated type was on distal(40.0%) and furcation area(50.0%), but there was no predominat pattern on palatal and mesial root surfaces. 6. In mandibular molars, aggregated type(39.5%) and scattered type(28.9%) were predominant deposition patterns of subgingival calculus on buccal root surface, aggregated type(36.8%) was on lingual surface, linear type(39.5%) and aggregated type(34.2%) were on furcation area, but there was no predominant pattern on mesial and distal root surfaces.

• Journal of the Korean Society of Tobacco Science
• /
• v.37 no.1
• /
• pp.8-17
• /
• 2015

The purpose of this study is to classify the tobacco names in the world, to investigate the regional distribution of the classified type, and to show origin of names according to the type. The names of tobacco used in this study was 50. The type of tobacco names was classified by the presence or absence of nasal sound(morn) on the first syllable, the Number of syllable, and the structure of consonants and vowels of tobacco names. Type I (Dambago) has the nasal sound on the first syllable. The proportion of Type I(Dambago) was 28%. And the rest(Type I~Type V ; 72%) has no nasal sound. Type II(Tabaco) has three syllables, and its proportion was 20%. Type III(Tabac) has the two syllables and the structure of T+vowels+B+vowels. And its proportion was 30%. Type IV(Tutun) has the two syllables and the structure of T+vowels+T+vowels. And its proportion was 12%. Type V(Duhan) has the two syllables and the structure of D+vowels+H(V)+vowels. And its proportion was 10%. The world's most widely distributed type was Type I(Dambago). regional distribution of the world's tobacco names were clustered by the type. 72% of Type I(Dambago) was distributed in Asia. The etymology of Type I(Dambago) was only 14% Tambaku and the other is not yet known. The etymology of Type I(Dambago) seems to be derived from the Haitian Tambaku(meaning a tobacco pipe). 88% of Type II(Tabaco) and III(Tabac) were distributed in Europe. The etymology of Type II(Tabaco) and Type III(Tabac) were 84% Spanish "Tabaco". 100% of Type IV(Tutun) and V(Duhan) were distributed in Europe. The etymology of Type IV(Tutun) and Type V(Duhan) were 100% Turkish tutun and duhan, respectively. This finding suggests that the etymology of Type I(Dambago) is certainly may be Haitian "Tambaku(meaning a tobacco pipe)".

• Journal of Environmental Science International
• /
• v.23 no.8
• /
• pp.1437-1446
• /
• 2014

This study, the urban energy used office building green roof type composition of the target by analyze building energy reductions. Green roof is total 6 types(type A~F) were selected, EnergyPlus the energy simulation programs were used. Top floor of green roof types evaluation, the reduction of the cooling peak load type E(1.26%), type D(1.30%), type C(1.37%), type B(1.45%), type F(1.49%), and heating peak load is type D(1.32%), type E(1.40%), type C(1.47%), type F(1.69%), type B(2.13%) order. Annual cooling load of heating load is reduced more than about 1% effect. The heating load reduction ratio for a maximum of 9% respectively. Cooling peak load of the building energy performance evaluation of type F > type B > type C > type D > type E in the order and in the case of peak loads heating type B > type F > type D > type E>type C order. Annual total energy use reduction of 1.07 to 1.22% and earn, type B in the best good. In primary energy use reductions in the presence of a green roof were in the 4249~4876 kWh/yr. Annual $CO_2$ emissions reductions of unapplied type A were analyzed on average 469.78 kg.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.4
• /
• pp.141-158
• /
• 2016

The objective of this study is to examine the type and characteristics of hat, and also to analyze the formative characteristics of hats shown in $Pr{\hat{e}}t-{\grave{a}}$-porter Collection. The literature review focused on the relevant technical books and preceding researches while the case study targeted 1,561 photos of hats shown in the 'Donga TV Collection'. The research range was from the S/S season of 2012 to the F/W season of 2015/16. The results of this study are as follows. 1. A hat is composed of crown and brim. In the results of classifying hats based on it, there were 572 crown-type hats, 533 hat-type, 219 cap-type, 156 irregular-type, and 81 brim-type in the order. 2. For the crown-type hats, they were mainly like cylindrical-type, bell-type, dome-type, and circle-type, using colors like black, beige, brown, red, mustard, and grey, and materials like wool, fur, velvet, straw, and metal while they were decorated with bead or lace. 3. For the hat-type hats, they were mainly like bell-type, ladder-type, and hemisphere-type, using colors like peach, white, gold, brown, and khaki, and materials like silk, cotton, straw, and wool while they were decorated with feather and ribbon. 4. For the cap-type hats, they were mainly like hemisphere-type, using colors like white, black, khaki, mustard, and purple, and materials like fur, leather, and wool while they were decorated with wappen and chain. 5. For the irregular-type hats, they were mainly like sandglass-type, box-type, animal-type, trumpet-type, and bell-type, using colors like purple, orange, pink, yellow, and sky-blue, and materials like metal, feather, mesh, plastic, straw, and linen while they were decorated with ribbon, net, bell, and flower. 6. For the brim-type visor, they were mainly like square-type, using colors like transparent, yellow, and black, and materials like plastic, cotton, leather, and metal.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.6 no.1
• /
• pp.45-50
• /
• 2012

Thoracolumbar orthosis has been used for the rehabilitation of the patients with senile kyphosis. Recently, a number of different thoracolumbar orthosis designs have been introduced but its biomechanical effectiveness still remain unknown. In this study, we compared the pressure distribution on the surface of the trunk and stresses on the orthosis in relation to changes in connecting frame designs (Type 1, one-connecting frame type; Type 2, two-connecting frame type; Type 3, all-in-one type) using finite element (FE) models under different motions of the trunk. The results showed that Type 3 distributed the pressure on the trunk most evenly followed by Type 2 and Type 1 and the difference between Type 1 and Type 2 was negligible. ROM was limited most effectively by Type 3 ($8.5{\sim}9.4^{\circ}$), followed by Type 2 ($11.3{\sim}13.9^{\circ}$) and Type 1 ($12.1{\sim}15.4^{\circ}$). The ratio between the peak von Mises stress and yield strength of each material remained less than 20% regardless of orthosis type indicating low likelihood of component failure. In conclusion, our study found that all-in-one type of orthosis was the most effective design for the conservative treatment of spinal deformity in terms of function and comfort.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.1
• /
• pp.125-131
• /
• 2001

In this study, we compared the properties of 23 high and 55 low price sunglass lenses with the standards in the ordinary optical properties, materials, coloration, UV, IR and luminous transmittance, color acceptance for traffic signal, chromaticity and contrast sensitivity. The ordinary optical properties of the lenses met comparatively the requirements of the KS standard. The HIGH-type and LOW-type lenses were primarily made by glass and acrylate, respectively. In the coloration, HIGH-type was in group around neutral color but LOW-type was distributed widely on the line between 570 nm and 485 nm. There are fails in 7% of HIGH-type and 18% of LOW-type in the stimulus purity of the luminous transmittance. Wavelength of the UV/VIS cut-off was over 350 nm for HIGH-type but 6% of LOW-type was under 350 nm. In the erythemal UV, all HIGH-type met the needs of standards but 5 LOW-type failed with DIN standard In the near UV, KS standard worked in stringency, and HIGH-type showed more failure than LOW-type. The characteristics of the IR transmittance of HIGH-type was better than that of LOW-type. In the color acceptance of traffic signal, all HIGH-type met the needs of ANSI standards but 21.8% of LOW-type failed with the standard. In the contrast sensitivity tested with various coloured sunglasses, the value increased with increasing of Land decreasing of test distance. In view of the results so far, HIGH-type met with excellent properties as compared with LOW-type.

• The Korean Journal of Nuclear Medicine
• /
• v.9 no.1
• /
• pp.45-50
• /
• 1975

A knowledge of the wide ranges in shape of liver is important in the interpretation of hepatic scintigraphy as some variants may be easily confused with pathological abnormalities. In this study, the variations in shape in 250 cases of normal liver obtained by scintiphoto were categorized into 9 types by means of the arbitrary standard for classification. Following were the results; 1) Among 250 normal cases, type 5 was 118(47.2%) with the highest prevalence and type 3 was 2 (0.8%) with the lowest. 2) A high incidence of obesity was noted in type 1, type 4 and type 8. That of ideal weight was noted in type 2, type 5 type 6 and type 9. 3) A high ratio of cardiac impression in scintiphoto was noted in type 4, type 7 and type 8. That of square left lobe was noted in type 2, type 6 and type 9. Finally that of tailed left lobe was in type 4, type 7 and type 8.

• Journal of the Korean Solar Energy Society
• /
• v.25 no.2
• /
• pp.35-43
• /
• 2005

This study aims to evaluate the natural lighting performance in the sound barrier tunnel. Therefore, to evaluate the daylighting performance, the combinations of 3 tunnel roof types which are flat-roof-type(type A), slope-roof-type(type B), arch-roof-type(type C) and 3 window types which are side-window-type(type 1), one-window-roof type(type 2), two-window-roof type(type 3) are evaluated by experimenting small scaled models. In this 9 cases of experiment, illuminance levels of each case are analyzed and evaluated. The conclusion of this study is that slope-roof-type(B) and arch-roof-type(C) is preferable to flat-roof-type(A) and one-window-roof-type(B) and two-window-roof-type(C) is preferable to side-window-type(A) for daylighting in the sound barrier tunnel.