• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.3-3
• /
• 2009

In order to investigate the possibility of using mixed rare earth $(Nd_{1/3}Eu_{1/3}Gd_{1/3})Ba_2Cu_3O_{7-x}$ (NEG123) as the superconducting layer of the HTS coated conductor, the NEG123 thin film was deposited epitaxialy on LAO(100) single crystal and IBAD_YSZ metal templates by pulsed laser deposition. Systematic studies were carried out to investigate the influences of deposition parameters of PLD on the micro structure, texture and superconducting properties of NEG-123 coated conductor. Deposition at oxygen partial pressure of 600 mTorr was needed to routinely obtain high quality NEG123 films with $J_c$'s (77K) over 2 MA/$cm^2$ and Tc's over 90K (${\Delta}T{\sim}2\;K$). We verified from magnetization study that the NEG123 has an improved in-field Jc as the field increases at temperatures between 10 K and 77 K compared with Gd123. The $J_c$ (77K, self field) and the value of onset $T_c$ of NEG123 thin film on LAO substrate was $4.0MA/cm^2$ and 92K, respectively. This is the first report, to the best of our knowledge, of coated conductors with NEG123 film as the superconducting layer which have Ic and Jc over 40 A/cm-width and 1.6 MA/$cm^2$ at 77K, self field. This study shows the possibility of using NEG123 film as the superconducting layer of the HTS coated conductor which can be used in high magnetic field power electric devices.

• 한국재료학회지
• /
• 제5권7호
• /
• pp.880-887
• /
• 1995

융체방사법으로 제작한 YB $a_2$C $u_3$A $g_{15}$과 YbB $a_2$C $u_3$A $g_{x}$(x=5, 16 and 53) 예비 합금 리본(precursor alloy ribbon)을 263~322$^{\circ}C$에서 산화시키고, 산소 1기압 온도 872~89$0^{\circ}C$에서 열처리하였다. 또한 약 10개의 리본을 층으로 쌓아 프레스로 압축.접착시켜 다층 시편(multilayered specimen)을 제작하였다. 이 다충 시편도 위의 리본과 같은 조건에서 열처리하였다. YB $a_2$C $u_3$ $O_{7-{\delta}}$ 혹은 YbB $a_2$C $u_3$ $O_{7-{\delta}}$상이 모든 리본과 모든 다층 시편에서 형성되었다. 이 1-2-3상들은 모든 리본에서 집합조직(texture)을 나타내지 않았으나, 다층 시편들에서는 약간의 집합조직을 나타내었다. 모든 리본은 0 자장 77K에서 임계 전류 밀도 $J_{c}$가 0을 나타내었다. 다층 시편 중에서 YB $a_2$C $u_3$A $g_{15}$과 YbB $a_2$C $u_3$A $g_{16}$시편이 각각 260, 180A/$\textrm{cm}^2$의 임계 전류 밀도를 나타내었다. 여러 리본들 중에서 YB $a_2$C $u_3$A $g_{15}$ 과 YbB $a_2$C $u_3$A $g_{16}$ 리본이, 프레스 변형으로 집합조직을 가지게 함으로써 향상된 $J_{c}$를 가진 초전도 산화물을 만들 수 있는 적절한 조성을 가지고 있다. 다층 YB $a_2$C $u_3$A $g_{15}$ 시편의 개시 임계 온도 ( $T_{on}$ )는 92K 이었으며, 다층 YbB $a_2$C $u_3$A $g_{x}$(x=5, 16 and 53)의 $T_{on}$ 은 88~90K이었다.

• Progress in Superconductivity
• /
• 제9권1호
• /
• pp.91-95
• /
• 2007

[ $YBa_2Cu_3O_{7-{\delta}}$ ] films have been prepared on $LaAlO_3$ (100) single-crystal substrates by the metal organic deposition using dichloroacetate precursors (DCA-MOD). DCA precursor solutions with different composition such as; Yttrium-excess(15 at%), barium-poor(25 at%), and a stoichiometric(Y:Ba:Cu=1:2:3) were prepared in order to investigate the effects of precursor composition on the properties of YBCO films prepared by DCA-MOD method. Coated films were calcined at low temperature up to $500^{\circ}C$ in flowing humid oxygen atmosphere. Conversion heat treatment was performed $800^{\circ}C$ for 2 h in flowing Ar gas containing 1000 ppm oxygen with a humidity of 9.45%. For the film prepared using excess yttrium composition, high critical current density ($J_c$) of $>2MA/cm^2$ was obtained whereas, for the films prepared using barium-poor composition, $J_c$ was lower than $1MA/cm^2$.

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권4호
• /
• pp.15-20
• /
• 2013

We investigated the flux pinning properties of both 10 mol% Zr-and Sn-doped $YBa_2Cu_3O_{7-{\delta}}$ (YBCO) films with the same thickness of ~350 nm for a comparative purpose. The films were prepared on the $SrTiO_3$ (STO) single crystal substrate by the metal-organic deposition (MOD) process. Compared with Sn-doped YBCO film, Zr-doped one exhibited a significant enhancement in the critical current density ($J_c$) and pinning force density ($F_p$). The anisotropic $J_{c,min}/J_{c,max}$ ratio in the field-angle dependence of $J_c$ at 77 K for 1 T was also improved from 0.23 for Sn-doped YBCO to 0.39 for Zr-doped YBCO. Thus, the highest magnetic $J_c$ values of 9.0 and $2.9MA/cm^2$ with the maximum $F_p$ ($F_{p,max}$) values of 19 and $5GN/m^3$ at 65 and 77 K for H // c, respectively, could be achieved from Zr-doped YBCO film. The stronger pinning effect in Zr-doped YBCO film is attributable to smaller $BaZrO_3$ (BZO) nanoparticles (the average size ${\approx}28.4$ nm) than $YBa_2SnO_{5.5}$ (YBSO) nanoparticles (the average size ${\approx}45.0$ nm) incorporated in Sn-doped YBCO film since smaller nanoparticles can generate more defects acting as effective flux pinning sites due to larger incoherent interfacial area for the same doping concentration.

• Progress in Superconductivity
• /
• 제10권2호
• /
• pp.133-138
• /
• 2009

The $Nd_{1+x}Ba_{2-x}Cu_3O_{7-{\delta}}$(Nd123) superconductor exhibits high performance in high magnetic field and high temperature. We have studied phase stability for Nd123 under reduced oxygen partial pressure and various heat-treatment conditions. The main phase is Nd123 and some samples contain small amounts of Nd422 depending on the temperature and oxygen partial pressure. The decomposition temperature decreases with decreasing oxygen partial pressure from $1052^{\circ}C(P(O_2)$=150 Torr) to about $845^{\circ}C(P(O_2)$=0.1 Torr). The liquidus line was steeper temperature with decreasing oxygen partial pressure. In same condition of oxygen partial pressure, the region of stable Nd123 phase was formed at slightly higher temperature than the region of stable YBCO phase.

• 한국세라믹학회지
• /
• 제36권2호
• /
• pp.203-209
• /
• 1999

Si 기판위에 Ba2YCu3O7-$\delta$ 고온초전도체를 응용하기 위해 요구되는 buffer층으로 유망한 재료인 LaAlO3 단일상 분말을 고상반응법과 자발착한 연소반응법으로 제조하였다. 제조된 LaAlO3 분말의 입자형태와 결정상태는 scanning electron microscope (SEM)과 X-ray diffractometer (XRD)를 이용하여 분석하였다. 분말의 비표면적과 소결특성은 각각 Brunauer-Emmett-Teller(BET) 방법과 dilatometer를 측정하였다. 고상반응법으로 LaAlO3 분말을 제조할 때에는 하소온도를 150$0^{\circ}C$까지 높게 하여도 단일상을 얻는 것이 어려웠으나 자발착한 연소반응법에 의한 분말제조는 $650^{\circ}C$의 저온에서 하소하여도 쉽게 얻을 수 있었다. Dilatometer 측정을 통하여 분석해 보면, 고상반응법에 의한 분말보다 자발착한 연소반응법에 의한 분말로 제조된 소결체가 고상반응법에 의한 소결체에 비해 1.4배나 큰 소멸밀도(98.87%)를 가졌다. 이렇게 소결밀도에서 큰 차이가 나는 것은 자발착한 연소방법에 의한 분말의 평균 입자크기가 nano crystal size이고 비표면적 값(56.54 $m^2$/g)이 매우 크기 때문이다. 두가지 방법으로 제조된 분말을 이용, LaAlO3 layer를 스크린 프린팅과 소결법으로 Si 기판상에 제조하였으며 자발착한 연소합성법으로 제조된 분말은 110$0^{\circ}C$에서 우수한 소결특성을 나타내었다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.189-192
• /
• 2000

We fabricated rapid single-flux-quantum RS flip-flop circuits with and without Y$_1$Ba$_2$Cu$_3$O$_{7-{\delta}}$(YBCO) ground plane. The circuit consists of SNS-type ramp-edge Josephson junctions that have cobalt-doped YBCO and Sr$_2$AITaO$_6$(SAT) for barrier layer and insulator layer, respectively. The fabricated Josephson junction showed a typical RSJ-like current-voltage(I-V) characteristics above 50K. We sucessfuly demonstrated RS flip-flop at temperatures around 50K. The RS flip-flop fabricated on ground plane showed more definite set and reset state in voltage-flux(V-${\phi}$) modulation curve for read SQUID, which may be attributed to a shielding effect of the YBCO ground plane.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 초전도 자성체
• /
• pp.46-49
• /
• 2002

The aim of this paper is to investigate the influence of various deformation ratio on texture of Ag tapes that can be used as a RE-$Ba_2Cu_3O_{7-{\delta}}$ coated conductor tapes without any buffer layer. We fabricated as-rolled Ag substrate with various deformation ratio per step. Thickness and total deformation ratio of Ag tapes were $100{\mu}m$ and >98%, respectively. And as-rolled Ag substrate was annealed at $750^{\circ}C$ for 30min. The as-rolled and recrystallization textures were measured using x-ray pole figures and orientation distribution function (ODF) analysis. With the increase of rolling ratio from 5 to 20%, deformation texture are changed from {1l0}<311> to {1l0}<112>, {032}<100>, {051}<211>. After recrystallization by annealing, main texture was observed to {013}<100> under present condition.