• 제목/요약/키워드: Y$\u{o}$ju

검색결과 309건 처리시간 0.025초

백서 두개골결손모델에서 실크단백과 골형성단백 이식체가 골재생에 미치는 영향 (The effect of silk fibroin and rhBMP-2 on bone regeneration in rat calvarial defect model)

  • 남정훈;노경록;방은오;유우근;강응선;권해용;김성곤;박영주
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제36권5호
    • /
    • pp.366-374
    • /
    • 2010
  • Introduction: This study evaluated the capability of silk fibroin (SF) and recombinant human bone morphogenetic protein-2 loaded SF (SF-BMP) as a bone defect replacement matrix when grafted in a calvarial bone defect of rats in vivo. Materials and Methods: A total 70 calvarial critical size defects (5.0 mm in diameter) made on 35 adult female Sprague-Dawley rats were used in this study. The defects were transplanted with (1) rhBMP-2 loaded silk fibroin graft (SF-BMP: 0.8+$10\;{\mu}g$), (2) Silk fibroin (SF: $10\;{\mu}g$), and (3) no graft material (Raw). The samples were evaluated with soft x-rays, alkaline phosphatase activity, calcium/phosphate quantification, histological and histomorphometric analysis at postoperative 4 and 8 weeks. Results: The SF-BMP group ($48.86{\pm}14.92%$) had a significantly higher mean percentage bone area than the SF group ($24.96{\pm}11.01%$) at postoperative 4 weeks.(P<0.05) In addition, the SF-BMP group ($40.01{\pm}12.43%$) had a higher % bone area at postoperative 8 weeks than the SF group ($33.26{\pm}5.15%$). The mean ratio of gray scale levels to the host bone showed that the SF-BMP group ($0.67{\pm}0.08$) had a higher mean ratio level than the SF group ($0.61{\pm}0.09$) at postoperative 8 weeks. These differences were not statistically significant.(P=0.168 and P=0.243, respectively) The ratio of the calcium and phosphate contents of the SF-BMP ($0.93{\pm}0.22$) group was lower than that of the SF ($1.90{\pm}1.42$) group at postoperative 4 weeks. However, the SF-BMP group ($0.75{\pm}0.31$) had a higher Ca/$PO_4$ ratio than the SF ($0.68{\pm}0.04$) at postoperative 8 weeks. These differences were not statistically significant.(P=0.126 and P=0.627, respectively) For the bone-specific alkaline phosphatase (ALP) activity, which is recognized as a reliable indicator of the osteoblast function, the SF-BMP ($23.71{\pm}8.60\;U/L$) groups had a significantly higher value than the SF group ($12.65{\pm}6.47\;U/L$) at postoperative 4 weeks.(P<0.05) At postoperative 8 weeks, the SF-BMP ($21.65{\pm}10.02\;U/L$) group had a lower bone-specific ALP activity than the SF group ($16.72{\pm}7.35\;U/L$). This difference was not statistically significant.(P=0.263) For the histological evaluation, the SF-BMP group revealed less inflammation, lower foreign body reactions and higher bone healing than the SF group at postoperative 4 and 8 weeks. The SF group revealed more foreign body reactions at postoperative 4 weeks. However, this immunogenic reaction decreased and the remnant of grafted material was observed at postoperative 8 weeks. For histomorphometric analysis, the SF-BMP group had a significantly longer bone length to total length ratio than those of the SF group at postoperative 4 and 8 weeks.(P<0.05) Conclusion: The rhBMP-2 loaded silk fibroin graft revealed fewer immunoreactions and inflammation as well as more new bone formation than the pure silk fibroin graft. Therefore, silk fibroin may be a candidate scaffold for tissue engineered bone regeneration.

인산염계 기능성 단량체가 첨가된 수종의 자가 접착 레진시멘트와 지르코니아 세라믹 사이 열순환 전후 전단결합강도 비교 (Evaluation of shear-bond strength between different self-adhesive resin cements with phosphate monomer and zirconia ceramic before and after thermocycling)

  • 이지훈;김민경;이정진;안승근;박주미;서재민
    • 대한치과보철학회지
    • /
    • 제53권4호
    • /
    • pp.318-324
    • /
    • 2015
  • 목적: 본 연구에서는 서로 다른 인산염계 기능성 단량체가 첨가된 5종의 자가 접착 레진시멘트와 지르코니아 사이의 열순환 전후 전단결합강도를 비교 평가하고자 하였다. 재료 및 방법: Airborne particle abrasion ($50{\mu}m$ $Al_2O_3$)을 시행한 디스크 모양의 Y-TZP 지르코니아 블록을 총 100개 준비하였다. 그리고 composite resin cylinder ($Filtek^{TM}$ Z250, 3M ESPE, St. Paul, MN, USA) 100개를 준비하였다. 서로 다른 인산염계 기능성 단량체가 첨가된 5종의 이중 중합형 자가 접착 레진시멘트 즉, Permacem 2.0 (DMG, Hamburg, Germany), $Clearfil^{TM}$ SA Luting (Kuraray Medical, Tokyo, Japan), $Multilink^{(R)}$ Speed (Ivoclar Vivadent, Schaan, Liechtenstein), $RelyX^{TM}$ U200 Automix (3M ESPE, Neuss, Germany), G-Cem $LinkAce^{TM}$ (GC Corporation, Tokyo, Japan)를 이용하여 지르코니아 블록과 composite resin cylinder를 접착하고 1군당 20개의 시편을 갖는 5개의 군을 만들었다. 시편을 $37^{\circ}C$ 의 증류수에 24시간 동안 보관한 후 각 군의 시편 절반(n=10)은 곧 바로 그리고 나머지 절반(n=10)은 5000회 열순환(5 - $55^{\circ}C$) 후에 전단결합강도를 측정하였다. 파절면은 FE-SEM을 이용하여 관찰하였다. 통계분석은 레진시멘트 종류 및 열순환 유무에 따른 전단결합강도의 비교를 위해 Two/One-way ANOVA를 시행하고 Tukey HSD post-hoc test를 이용하여 사후 검정하였으며, 열순환 전후의 비교를 위해 paired t-test를 이용하였다($\alpha$=.05). 결과: 열순환 전과 후 모두 $Multilink^{(R)}$ Speed 군은 나머지 4종류의 시멘트 군 보다 큰 전단결합강도를 나타내었다. G-Cem $LinkAce^{TM}$ 군은 열순환 전과 비교하여 열순환 후에 유의하게 낮은 전단결합강도를 나타내었지만, 다른 4종류 군은 열순환 전후 유의한 차이가 없었다. 결론: 인산염계 단량체를 포함한 대부분의 이중 중합형 자가 접착 레진시멘트는 지르코니아와 높은 전단결합강도를 보이고 열순환에 의해 유의한 영향을 받지 않아 지르코니아 보철물의 접착에 유용할 것이라고 사료된다.

RTP 공정을 통한 태양전지용 AZO 박막의 후열처리 특성연구 (A Study on Properites of PV Solar cell AZO thin films post-annealing by RTP technique)

  • 양현훈;김한울;한창준;소순열;박계춘;이진;정해덕;이석호;백수웅;나길주;정운조
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2011년도 춘계학술대회 초록집
    • /
    • pp.127.1-127.1
    • /
    • 2011
  • In this paper, ZnO:Al thin films with c-axis preferred orientation were prepared on Soda lime glass substrates by RF magnetron sputtering technique. AZO thin film were prepared in order to clarify optimum conditions for growth of the thin film depending upon process, and then by changing a number of deposition conditions and substrate temperature conditions variously, structural and electrical characteristics were measured. For the manufacture of the AZO were vapor-deposited in the named order. It is well-known that post-annealing is an important method to improve crystal quality. For the annealing process, the dislocation nd other defects arise in the material and adsorption/decomposition occurs. The XRD patterns of the AZO films deposited with grey theory prediction design, annealed in a vacuum ambient($2.0{\times}10-3$Torr)at temperatures of 200, 300, 400 and $500^{\circ}C$ for a period of 30min. The diffraction patterns of all the films show the AZO films had a hexagonal wurtzite structure with a preferential orientation along the c-axis perpendicular to the substrate surface. As can be seen, the (002)peak intensities of the AZO films became more intense and sharper when the annealing temperature increased. On the other hand, When the annealing temperature was $500^{\circ}C$ the peak intensity decreased. The surface morphologies and surface toughness of films were examined by atomic force microscopy(AFM, XE-100, PSIA). Electrical resistivity, Gall mobility and carrier concentration were measured by Hall effect measuring system (HL5500PC, Accent optical Technology, USA). The optical absorption spectra of films in the ultraviolet-visibleinfrared( UV-Vis-IR) region were recorder by the UV spectrophotometer(U-3501, Hitachi, Japan). The resistivity, carrier concentration, and Hall mobility of ZnS deposited on glass substrate as a function of post-annealing.

  • PDF

Amorphous Indium-Tin-Zinc-Oxide (ITZO) Thin Film Transistors

  • 조광민;이기창;성상윤;김세윤;김정주;이준형;허영우
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2010년도 제39회 하계학술대회 초록집
    • /
    • pp.170-170
    • /
    • 2010
  • Thin-film transistors (TFT) have become the key components of electronic and optoelectronic devices. Most conventional thin-film field-effect transistors in display applications use an amorphous or polycrystal Si:H layer as the channel. This silicon layers are opaque in the visible range and severely restrict the amount of light detected by the observer due to its bandgap energy smaller than the visible light. Therefore, Si:H TFT devices reduce the efficiency of light transmittance and brightness. One method to increase the efficiency is to use the transparent oxides for the channel, electrode, and gate insulator. The development of transparent oxides for the components of thin-film field-effect transistors and the room-temperature fabrication with low voltage operations of the devices can offer the flexibility in designing the devices and contribute to the progress of next generation display technologies based on transparent displays and flexible displays. In this thesis, I report on the dc performance of transparent thin-film transistors using amorphous indium tin zinc oxides for an active layer. $SiO_2$ was employed as the gate dielectric oxide. The amorphous indium tin zinc oxides were deposited by RF magnetron sputtering. The carrier concentration of amorphous indium tin zinc oxides was controlled by oxygen pressure in the sputtering ambient. Devices are realized that display a threshold voltage of 4.17V and an on/off ration of ${\sim}10^9$ operated as an n-type enhancement mode with saturation mobility with $15.8\;cm^2/Vs$. In conclusion, the fabrication and characterization of thin-film transistors using amorphous indium tin zinc oxides for an active layer were reported. The devices were fabricated at room temperature by RF magnetron sputtering. The operation of the devices was an n-type enhancement mode with good saturation characteristics.

  • PDF

원자로 상부헤드 제어봉구동장치 관통노즐 형상이 J-Groove 용접잔류응력에 미치는 영향 (Effects of Geometry of Reactor Pressure Vessel Upper Head Control Rod Drive Mechanism Penetration Nozzles on J-Groove Weld Residual Stress)

  • 김주희;김윤재;이성호;허남용;배홍열;오창영;김지수;박흥배;이승건;김종성;허남수
    • 대한기계학회논문집A
    • /
    • 제35권10호
    • /
    • pp.1337-1345
    • /
    • 2011
  • 가압경수로형 원자로의 원자로압력용기 상부헤드에는 많은 제어봉구동장치(CRDM) 노즐이 분포한다. 최근 10 여 년 동안 제어봉구동장치 alloy 600 CRDM 노즐에서 균열 발생 사례가 증가하고 있으며, 이는 용접과 연관성이 매우 깊은 것으로 알려져 있다. CRDM 노즐에서 발생하는 축 및 원주방향 균열은 유럽과 미국의 원자력 발전소에서 발견되었으며, 사고의 원인은 용접 잔류응력 및 작용하중에 기인하는 일차수응력부식균열(PWSCC)임이 확인되었다. 이러한 이유로 본 연구에서는 유한요소해석을 통해 한국형 원자로의 CRDM 관통 노즐 용접부를 대상으로 용접 잔류응력을 예측하였으며, 특히, 관통노즐의 위치와 형상, 용접부 필렛 형상 및 인접노즐 용접에 의한 영향을 분석하였다.

Synthesis of High-Quality Monolayer Graphene on Copper foil by Chemical Vapor Deposition

  • 이수일;김유석;송우석;조주미;김성환;박종윤
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
    • /
    • pp.351-352
    • /
    • 2011
  • 그래핀(Graphene)은 2차원 평면구조의 $sp^2$ 탄소 결합으로 이루어진 물질이다. 일반적으로 그래핀은 탄소 원자 한층 정도의 얇은 두께를 가지면서 강철의 100배 이상 높은 강도, 다이아몬드보다 2배 이상 뛰어난 열 전도성, 그리고 규소보다 100배 이상 빠른 전자이동도 등의 매우 우수한 특성을 지닌다. 그래핀을 합성하거나 얻는 방법에는, 기계적 박리법(Micro mechanical exfoliation), 산화흑연(graphite oxide)을 이용한 reduced graphene oxide(RGO)방법과 탄화 규소(SiC)를 이용한 epitaxial growth 방법 등이 있지만, 대 면적화가 어렵거나 구조적 결함이 큰 문제점이 있다. 반면, 탄화수소(hydrocarbon)를 탄소 공급원으로 하는 열화학 기상 증착법(Thermal chemical vapor deposition, TCVD)은 구조적 결함이 상대적으로 적으면서 대 면적화가 가능하다는 이점 때문에 최근 가장 많이 이용되고 있는 방법이다. TCVD를 이용, 니켈, 몰리브덴, 금, 코발트 등의 금속에서 그래핀 합성연구가 보고되었지만, 대부분 수 층(fewlayer)의 그래핀이 합성되었다. 하지만, 구리 촉매를 이용하는 것이 단층 그래핀 합성에 매우 효율적이라는 연구결과가 보고되었다. 구리의 경우, 낮은 탄소융해도(solubility of carbon) 때문에 표면에서 self limiting 과정을 통하여 단층 그래핀이 합성된다. 그러나 단층 그래핀 일지라도 면저항(sheet resistance)이 매우 높고, 이론적 계산값에 비해 전자이동도(electron mobility)가 낮게 측정된다. 이러한 원인은 구조적 결함에서 기인된 것으로써 산업으로의 응용을 어렵게 만들기 때문에 양질의 단층 그래핀 합성연구는 필수적이다[1,2]. 본 연구에서는 TCVD를 이용하여 구리 포일(25 ${\mu}m$, Alfa Aeser) 위에 메탄가스를 탄소공급원으로 하여 수소를 함께 주입하고, 메탄가스의 양과 합성시간, 열처리 시간을 조절하면서 균일한 단층 그래핀을 합성하였다. 합성된 그래핀을 $SiO_2$ (300 nm)기판위에 전사(transfer)후 라만 분광법(raman spectroscopy)과 광학 현미경(optical microscope)을 통하여 분석하였다. 그 결과, 열처리 시간이 증가할수록 촉매로 사용된 구리 포일의 grain size가 커짐을 확인하였으며, 구리 포일 위에 합성된 그래핀의 grain size는, 구리 포일의 grain size에 의존하여 커짐을 확인하였다. 또한 동일한 grain 내의 그래핀은 균일한 층으로 합성되었다. 이는 기계적 박리법, RGO 방법, epitaxial growth 방법으로 얻은 그래핀과 비교하여 매우 뛰어난 결정성을 지님이 확인되었다. 본 연구를 통하여 면적이 넓으면서도 결정성이 매우 뛰어난 양질의 단층 그래핀 합성 방법을 확립하였다.

  • PDF

가미지황환이 저산소성 신경세포 손상에 미치는 영향 (Influence of Kamijihwang-hwan on the Hypoxic Damage of Cultured Cerebral Neurons from mouse and SK-N-MC cells)

  • 백은경;주성민;김근중;김대근;강정호;이영찬;이준;김영목;전병훈
    • 동의생리병리학회지
    • /
    • 제17권4호
    • /
    • pp.1082-1091
    • /
    • 2003
  • To elucidate the neuroprotective effect of Kamijihwang-hwan(KSH) on nerve cells damaged by hypoxia, the cytotoxic effects of exposure to hypoxia were determined by XTT, NR, MTT and SRB asssay. The activity of catalase and SOD was measured by spectrophometry, and TNF-α and PKC activity was measured after exposure to hypoxia and treatment of Kamijihwang-hwan(KSH) water extract(KJHWE). Also the neuroprotective effect of KJHWE was researched for the elucidation of neuroprotective mechanism. The results were as follows ; Hypoxia decreased cell viability measured by XTT, NR assay when cultured cerebral neurons were exposed to 95% N2/5% CO₂ for 2~26 minutes in these cultures and KJHWE inhibited the decrease of cell viability. H₂O₂ treatment decreased cell viability measured by MTT, and SRB assay when cultured cerebral neurons were exposed to 1-80 uM for 6 hours, but KJHWE inhibited the decrease of cell viability. Hypoxia decreased catalase and SOD activity, and also TNF-α and PKC activity in these cultured cerebral neurons, but KJHWE inhibited the decrease of the catalase and SOD activity in these cultures. Hypoxia triggered the apoptosis via caspase activation and internucleosomal DNA fragmentation. Also hypoxia stimulate the release of cytochrome c form mitochondria. KJHWE inhibited the apoptosis via caspase activation induced by hypoxia. From these results, it can be suggested that brain ischemia model induced hypoxia showed neurotoxity on cultured mouse cerebral neurons, and the KJHWE has the neuroprotective effect in blocking the neurotoxity induced by hypoxia in cultured mouse cerebral neurons.

대동맥판 치환술의 임상 성적 (Clinical Results of Aortic Valve Replacement)

  • 나국주;오정우;안병희;김상형
    • Journal of Chest Surgery
    • /
    • 제30권2호
    • /
    • pp.152-157
    • /
    • 1997
  • 전남대학교병원 흉부외과학교실에서는 1986년 8월 부터 1995년 7월 까지 65례의 대동맥판치환술을 경험하였다. 48명이 남자였고 17명의 환자가 여자였으며 19세에서 68세의 연령분포를 보였다. 판막질환의 원인은 류마티성 질환이 29례 (44.6%), 선천성 판막질환이 6례 (6.2%), 심내막염이 6례 (6.2%) 등을 보였다 동반된 수술은 10례에서 있었는데 5례가 선천성 심장 질환의 교정술이었고심막절제술 1례, 관상동맥우회로 조성술 1례, 발살바 동맥동 수술 2례, 대동맥 판막하막 절제술이 1례 등이었다. 사용된 판막은 St. Jude-Medical판이 42개, Duromedics판막이 22개, Bjork-Shiley판막이 2개, Carpentier-Edward판막 이 1개 있었다. 병원내 사망은 3례(4.6%)있었고 만기사망이 2례(3.2%)있었다. 수술후 사망례를 제외하고 100%의 환자에서 추적 관리가 되었고 10년 생존율은 85.3%를 보였다. 술후 합병증은 저심박출증이 8례, 부정맥이 5례, 기계판막과 관련된 용혈이 1례 있었다. 수술후NYHA기능분류는 수술전 2.79$\pm$ 0.66에서 수술후 1.25 $\pm$ 0.49로 개선되었고 단기 및 중장기 추적 조사 결과 우수한 기계판의 혈역학적 동태를 보였고 혈전증의 발생율은 아주 낮았다.

  • PDF

전라북도 임실군 병아리꽃나무 자생지의 생태적 특성 (Ecological Characteristics of Rhodotypos scandens Habitat in Imsil-gun, Jeollabuk-do, Korea)

  • 박경욱;변무섭;오현경;유주한
    • 환경영향평가
    • /
    • 제24권4호
    • /
    • pp.352-366
    • /
    • 2015
  • 본 연구는 병아리꽃나무 자생지의 식물상, 식생구조 및 토양과 같은 생태적 특성을 조사 및 분석하여 자생지 보전과 관리를 위한 기초 자료를 제공하는데 목적이 있다. 식물상은 57과 99속 107종 1아종 17변종 6품종 등 총 131분류군이며, 생활형은 교목(MM) 21분류군, 아교목(M) 24분류군, 관목(N) 30분류군, 지표식물(Ch) 6분류군, 반지중식물(H) 20분류군, 지중식물(G) 17분류군, 일년생식물(Th) 12분류군, 수생식물(HH) 1분류군이었다. 군락유형은 느티나무군락, 갈참나무군락, 참느릅나무군락, 까마귀베개군락, 밤나무군락, 자귀나무군락, 팽나무군락, 아까시나무군락 등 8개이다. 층위별 우점종의 경우 교목층은 느티나무, 갈참나무, 참느릅나무, 밤나무, 자귀나무, 팽나무, 아까시나무, 아교목층은 까마귀베개, 갈참나무, 느티나무, 자귀나무, 참느릅나무, 닥나무, 관목층은 병아리꽃나무로 나타났다. 종다양도 분석 결과, 종다양성지수는 1.691~2.610, 최대종다양성지수는 2.197~3.466, 균재도는 0.646~0.903, 우점도는 0.097~0.354로 나타났다. 토양 분석 결과, 평균 산도는 5.6, 평균 전기전도도 0.5ds/m, 평균 유효인산 59.1mg/kg, 평균 유기물함량 49.7%, 평균 치환성칼륨 $0.4cmol^+/kg$, 평균 치환성칼슘 $13.5cmol^+/kg$, 평균 치환성마그네슘 $3.3cmol^+/kg$으로 분석되었다.