• Progress in Superconductivity and Cryogenics
• /
• v.20 no.3
• /
• pp.1-4
• /
• 2018

The effect of sulfate substitution on the formation of (Pb,S)-1201 type phase was investigated. Polycrystalline samples with nominal compositions of $(Pb_{0.5}B_{0.5-x}S_x)(Sr_{2-y}La_y)CuO_z$, (x = 0 - 0.5, y = 0.7 - 1.0) and $(Pb_{0.5}S_{0.5})(Sr_{2-y}La_y)CuO_z$ (y = 0.5 - 1.0) were prepared by using a solid-state reaction method. The samples were characterized by powder X-ray diffraction (XRD) and resistivity measurements. XRD data revealed that almost-single (Pb,S)-1201 phase samples could be obtained for x = 0.5 and y = 0.9-1.0, judging from the similar results of the XRD patterns between the (Pb,S)-1201 and (Pb,B)-1201 phases. Each of the samples has a crystal structure with tetragonal symmetry. The sample with x = 0.5 and y = 0.9 is found to show an onset of resistivity dropping at over 23 K and zero resistivity at 12 K.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.10
• /
• pp.33-39
• /
• 2010

A self-organized nano-structured, photocatalytic $TiO_2$ membrane with large surface area of anatase crystallites was successfully fabricated by anodization. The nano-structured anodized $TiO_2$ membrane was characterized using EDX, SEM and XRD techniques and the effect of electrolyte type and concentration to fabricate $TiO_2$ metal membrane was also investigated. Regular nano tubular arrays were obtained By the EDX, SEM and XRD patterns, the anodized $TiO_2$ membrane showed the enhanced photocatalytic properties of anatase phase. Photocatalytic activities of fabricated $TiO_2$ metal membrane was also experimentally investigated as model compound of humic acid.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.533-536
• /
• 2001

Single crystal cubic silicon carbide(3C-SiC) thin film were deposited on Si(100) substrate up to a thickness of $4.3{\mu}m$ by APCVD(atmospheric pressure chemical vapor deposition) method using hexamethyildisilane(HMDS) at $1350^{\circ}C$. The HMDS flow rate was 0.5 sccm and the carrier gas flow rate was 2.5 slm. The HMDS flow rate was important to get a mirror-like. The growth rate of the 3C-SiC films was $4.3{\mu}m/hr$. The 3C-SiC epitaxical layers on Si(100) were characterized by XRD(X-ray diffraction), raman scattering and RHEED(reflection high-energy electron diffraction), respectively. The 3C-SiC distinct phonons of TO(transverse optical) near $796cm^{-1}$ and LO(longitudinal optical) near $974{\pm}1cm^{-1}$ were recorded by raman scattering measurement. The deposition films were identified as the single crystal 3C-SiC phase by XRD spectra($2{\theta}=41.5^{\circ}$). Also, with increase of films thickness, RHEED patterns gradually changed from a spot pattern to a streak pattern.

• Analytical Science and Technology
• /
• v.26 no.5
• /
• pp.340-351
• /
• 2013

The chemical element and structural characterization of different types of cements and its brick stones are been investigated under forensic aspects using X-ray florescence (XRF) and X-ray diffraction (XRD) spectrometer. The XRF provides rapid compositional data for controlling almost all stages of raw materials, clinker and cement. The decisive advantage of XRD methods is based on the unique character of the diffraction patterns of crystalline substances, the ability to distinguish between elements and their oxides, and the possibility to identify chemical compounds, polymeric forms, and mixed crystals by non-destructive examination. Therefore, combination of these examinations is useful and able to apply for the forensic analysis in comparison of cements and brick stones. There are more study remained to determine the viability of method for forensic analysis of brick stones and the limits of the discrimination that can be achieved.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.543-545
• /
• 2016

Four different hydroxyapatites (HAP) were prepared by a solvothermal method under different pHs and solvent species. The synthesized hydroxyapatites were analyzed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Four HAPs exhibited similar XRD patterns regardless of synthetic conditions. However, the morphology of hydroxyapatites was dependent of pH and solvent species under synthetic condition. The HAP prepared in pH 12 showed an elongated shape along the [001] direction compared to that prepared in pH 8. Also, the morphology of the HAPs synthesized in the presence of methanol and ethanol exhibited the more elongated hexagonal rod shape along the [001] direction with the high aspect ratio.

• Journal of the Korean Society of Safety
• /
• v.16 no.3
• /
• pp.76-82
• /
• 2001

An aqueous solution of a commercial liquid synthetic detergent for kitchen use was photodecomposed in the presence of titanium dioxides ponder under an atmosphere of air at room temperature. Titanium dioxides were prepared by sol-gel method from titanium iso-propoxide at different R R ratio($H_2O$/titanium iso-propoxide) and calcined at $500^{\circ}C$. All titanium dioxides m characterized by XRD, BET surface area analyzer and UV-VIS spectrometer. The surface mea of titanium dioxides prepared at R ratio=6 appeared higher volume about 20% than commercial $TiO_2$ catalyses. XRD patterns of titania particles were observed mixing phase together with rutile and anatase type. Titanium dioxides prepared by sol-gel method show higher activity about 6% than commercial $TiO_2$ catalysts on the Photocatalytic foundation of a commercial liquid synthetic detergent for kitchen. The concentration of the detergent decreased to about 90%, of its initial value at illumination times of 2 hour. illumination for 30 minutes decreased the concentration of oxygen to about one-fifth of the initial value.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.533-536
• /
• 2001

Single crystal cubic silicon carbide(3C-SiC) thin film were deposited on Si(100) substrate up to a thickness of 4.3 $\mu\textrm{m}$ by APCVD(atmospheric pressure chemical vapor deposition) method using hexamethyildisilane(HMDS) at 1350$^{\circ}C$. The HMDS flow rate was 0.5 sccm and the carrier gas flow rate was 2.5 slm. The HMDS flow rate was important to get a mirror-like. The growth rate of the 3C-SiC films was 4.3 $\mu\textrm{m}$/hr. The 3C-SiC epitaxical layers on Si(100) were characterized by XRD(X-ray diffraction), raman scattering and RHEED(reflection high-energy electron diffraction), respectively The 3C-SiC distinct phonons of TO(transverse optical) near 796 cm$\^$-1/ and LO(longitudinal optical) near 974${\pm}$1 cm$\^$-1/ were recorded by raman scattering measurement. The deposition films were identified as the single crystal 3C-SiC phase by XRD spectra(2$\theta$=41.5$^{\circ}$). Also, with increase of films thickness, RHEED patterns gradually changed from a spot pattern to a streak pattern

• Bulletin of the Korean Chemical Society
• /
• v.21 no.1
• /
• pp.56-60
• /
• 2000

The mechanism of a matrix modification for the trace determination of volatile lead and bismuth by an electro-thermal atomic absorption spectrophotometry was studied by a X-ray diffractometry (XRD). For the investigation of structures, the ash products of the elements were produced by using a palladium as a matrix modifier with or without aluminum or nickel as an auxiliary modifier. The same charring conditions as in the analysis of samples were applied together with much concentrated solution of analytical elements and modifiers in a graphite furnace to get a large amount of the product for XRD. The XRD patterns showed PbPd3 for lead and BiPd3 for bismuth. These mean that the reaction procedures through the charring and atomization were changed from $Pb^{2+}$ ${\rightarrow}$ PbO ${\rightarrow}$$Pb^0$ to $Pb^{2+}$ ${\rightarrow}$ PbO ${\rightarrow}PbPd_3$ ${\rightarrow}$ Pb o for lead and from $Bi^{3+}$ ${\rightarrow}$ BiO ${\rightarrow}$ Bi o to $Bi^{3+}$ ${\rightarrow}$ BiO ${\rightarrow}$ $BiPd_3$ ${\rightarrow}$ $Bi^0$ for bismuth by the addition of modifiers. The volatile elements were stabilized by the formation of palladium alloys through a charring process. Charring temperatures were raised about 500 $^{\circ}C$ by the alloying and the atomization was also stabilized for the enhancement of sensitivities.

• Journal of the Korean institute of surface engineering
• /
• v.56 no.4
• /
• pp.250-258
• /
• 2023

Ceramic oxide layer was formed on the surface of high silicon aluminum alloy by using PEO (plasma electrolytic oxidation) process. The microstructure of the oxide layer was analyzed using scanning electron microscopy (SEM) and x-ray diffraction patterns (XRD). The high silicon aluminum alloy prior to PEO process consists of Al, Si and Al₂Cu phases in XRD analysis, whereas Al₂Cu phase selectively disappeared after PEO treatment. Considerable decrease of relative intensity in most of peaks in XRD results of the high silicon aluminum alloy treated by PEO process was observed. It may be attributed to the formation of amorphous phases after PEO treatment. The corrosion behavior of the high silicon aluminum alloy treated by PEO process was investigated using electrochemical impedance spectroscopy (EIS) and other electrochemical techniques (i.e., open circuit potential and polarization curve). Electroanalytical studies indicated that the high silicon aluminum alloy treated by PEO process shows greater corrosion resistance than that untreated by PEO process.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.275-280
• /
• 1997

We have investigated the deposition characteristics of (Ni0.8Fe0.2)20Ag80 thin films as a function of chamber pressure and nitrogen flow rate with scanning electron microscopy(SEM), atomic force microscopy(AFM), XRD and $\alpha$-step. The deposition rate of these film is decreased with increasing the chamber pressure and the nitrogen flow rate. With raising the chamber pressure, the growth mode of thin film is changed from island growth to columnar one, which is probably due to energy of atom. Contrary, the nitrogen flow rate is raised, growth mode is changed from columnar to island one. According to the XRD patterns, the preferred orientation is inhibited as the nitrogen flow rate is kept above 10 sccm, but that is nearly independent on the chamber pressure. When the chamber pressure decrease or the nitrogen flow rate increase, phase separation into permoally and silver is occured.