• 한국전기화학회:학술대회논문집
• /
• 1999.04a
• /
• pp.14-14
• /
• 1999

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.4
• /
• pp.71-80
• /
• 2005

As local flash flood exceeding planned capacity occurs frequently, localized preparedness and response to flood inundation are increasingly important. Using XP-SWMM model and GIS techniques, this study analyzes inundation areas by local flash flood and develops rainfall standards for evacuation with the case of Sadang-Cheon area, a local stream and its nearby highly populated watershed in the southern part of metropolitan Seoul, Flood inundation areas overflowed from drainage systems are analyzed and mapped by amount of rainfall that is derived from reference levels of stream flow. Rainfall standards for evacuation are comprised of 'watch' (40mm/hr) in preparing for near-future inundation and 'evacuation' (65mm/hr) in responding to realized inundation. The methods suggested by this case study may be applied to other urban areas for sound flood prevention policy measures and thus risk minimization.

• Journal of Wetlands Research
• /
• v.13 no.3
• /
• pp.623-631
• /
• 2011

In recent decade, the occurrences of typhoon and severe storm events are increasing trend due to the climate change. And the intensity of natural disaster is more and more stronger and the loss of life and damage of property are also increasing. Therefore, this study tried to understand the impact of climate change on urban drainage system for prevention and control of natural disaster and for this, we selected Gyeyang-gu, Incheon city as a study area. We investigated the climate models and scenarios for the selection of proper model and scenario, then we estimated frequency based rainfall in hourly unit considering climate change. The XP-SWMM model was used to estimate the future flood discharge on urban drainage system using the estimated frequency based rainfall. As a result, we have known that the study area will be overflown in the future and so we may need prepare proper measures for the flood prevention and control.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1125-1131
• /
• 2012

According to abrupt decrese in number of farmer and ageing society, there has been a need for development of low cost agricultural robot. In this paper, a H/W and S/W platform of caterpillar type agricultural chemical dusting robot based on XP embedded system were described. The developed agricultural robot has 2 d.o.f caterpillar type driving wheel and 2 d.o.f chemical dusting spray mechanical system. The H/W platform of the agricultural robot consists of robot controller, remote controller and sensor controller. In S/W platform, 5 processes work concurrently, which are task manager, TCP-IP communication process, localization process, wheel control, and sensor control process. This robot platform has been developed for chemical dusting robot. We proved this system's validity through field test.

• Journal of Wetlands Research
• /
• v.18 no.1
• /
• pp.16-23
• /
• 2016

The purpose of this study is to analyze quantitatively the inundation causes by applying the prevention of performance objectives using the urban storm water runoff model XP-SWMM. The model was built by using DTM and storm sewer-network with the storm sewer and geo-data of the study area as input-data to assess the current performance of prevention. An analysis of the causes of the inundation by the frequency and the rainfall-duration. As a result, lack of pipe capacity due to flooding, as well as inundation heavier that the backwater rainfall occurs due to the rise of water level of outside. For solve the inundation damage, It is necessary to improvement pipe of capacity lack and installation of a flood control channel.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.1
• /
• pp.11-18
• /
• 2008

We created a cDNA microarray representing approximately 3,500 pig genes for functional genomic studies. The array elements were selected from 6,494 cDNA clones identified in a large-scale expressed sequence tag (EST) project. These cDNA clones came from normalized and subtracted porcine adipose tissue cDNA libraries. Sequence similarity searches of the 3,426 ESTs represented on the array using BLASTN identified 2,790 (81.4%) as putative human orthologs, with the remainder consisting of "novel" genes or highly divergent orthologs. We used the gene microarray to profile transcripts expressed by adipose tissue of fatty Chinese Xiang pig (XP) and muscley Large White (LW). Microarray analysis of RNA extracted from adipose tissue of fatty XP and muscley LW identified 81 genes that were differently expressed two fold or more. Transcriptional differences of four of these genes, adipocyte fatty acid binding protein (aP2), stearyl-CoA desaturase (SCD), sterol regulatory element binding transcription factor 1 (SREBF1) and lipoprotein lipase (LPL) were confirmed using SYBR Green quantitative RT-PCR technology. Our results showed that high expression of SCD and SREBF1 may be one of the reasons that larger fat deposits are observed in the XP. In addition, our findings also illustrate the potential power of microarrays for understanding the molecular mechanisms of porcine development, disease resistance, nutrition, fertility and production traits.

• Journal of the Korean Vacuum Society
• /
• v.1 no.1
• /
• pp.106-114
• /
• 1992

Abstract-Quantitative surface analysis of Co-Ni and Au-Cu alloys by XPS and SIMS was studied. For Co-Ni alloy, quantitative XPS analysis could be done within 1-2% relative error with pure element standards without any correction. For Au-Cu, quantitative XPS analysis was not possible without any correction. But it could be done with standard alloys of various composition within 1-2% relative error. Without standard alloys, Au-Cu alloys could be analyzed by XPS within 10% relative error with pure element standards. For SIMS analysis of Co-Ni alloys, the relative secondary ion yields of Co+/Nit has linear relation with ratio of each composition so that quantitative SIMS analysis was possible for Co-Ni alloys. Preliminary results of XPS round robin test of VAMAS-SCA Japan Project are given.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.38-38
• /
• 2017

본 연구는 내수침수에 의한 침수면적 예측을 위한 강우특성과 1차원 유출모형의 유출특성 및 월류특성 자료를 이용한 침수면적의 정확도를 다양한 호우사상을 적용하여 분석하였다. 국내에서 침수 취약지역 예측을 위해서 강우-유출모형의 유출량 예측 즉 홍수추적을 중심으로 이루어지고 있는 실정이다. 기존 모형이 홍수추적을 중심으로 이루어진 것은 대유역의 경우에 XP-SWMM 모형과 같은 정밀모형을 이용할 경우 긴 모의시간으로 인하여 예경보 발령을 위한 골든타임 확보가 어려우며, 홍수량 예측을 통하여 예측된 침수피해에 대한 정밀도 확보가 어렵기 때문에 실제 상황에 적용하기 어려운 문제점이 발생하고 있다. 컴퓨터 하드웨어의 발전에 따른 연산속도의 증가와 빅데이터 처리기술을 발전에 따라서 10년 전과 비교하여 2차원 침수면적 예측시간이 단축되기는 하였지만, 실제 침수면적 예측에 적용하기는 어려운 실정이다. 따라서, 모의시간이 짧은 1차원 강우-유출모형, 1차원 도시유출모형을 이용한 침수면적 예측방법에 대하여 연구하였다. 홍수피해 예측을 위하여 다양한 수문학적 인자의 영향 분석을 위해서 XP-SWMM 모형의 다양한 형태의 강우입력자료에 따른 1차원 유출 모의결과와 2차원 지표류 모의결과를 이용하여, 2차원 침수면적 예측결과를 추정하기 위한 수문학적 인자의 적용방법에 대하여 분석하였다. 모의시간이 짧은 강우-유출모형과 1차원 도시유출모형을 이용하여 도출한 수문학적 인자를 이용한 침수면적의 추정방법을 분석을 비교분석함으로써 침수면적 예측 시스템 구축방안에 대하여 구체적인 수문학적 인자들 생성을 위한 단계적 모형 적용방안 수립을 위한 자료로 활용할 수 있을 것이다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.289-289
• /
• 2019

연안지역의 침수예상도 작성은 풍수해저감종합계획 수립 시 진행되었으며. 풍수해저감종합계획을 통해 상습적으로 침수가 발생하는 구역에 대한 조사 결과 및 침수피해 이력 등을 알 수 있다. 본 연구에서는 침수 발생 원인을 하천, 강 등의 범람에 의한 외수침수, 유역 내 관로의 문제에 의해 발생하는 내수침수, 조위 상승, 해수의 역류 등에 의한 해수침수로 구분하였다. 대상 지역인 여수시 여수시청 인근 지역은 남해와 인접하고 있어 조위에 의한 영향을 받기 때문에, 유역 내 관로와 함께 해수 내수 복합원인에 의한 침수피해가 발생한다. 침수가 발생했을 때의 피해 발생 범위를 가시적으로 나타내기 위해 침수예상도를 작성하며, 이는 XP-SWMM을 통해 작성할 수 있다. XP-SWMM에 입력하는 자료는 강우재현기간에 따른 조위(해일고), 강우지속기간에 따른 강우분포 자료 등을 입력한다. 강우자료는 실강우 자료를 사용하는 경우 많은 시나리오를 반영하는데 한계가 있기 때문에 Huff 3분위 분포시킨 자료를 사용하였다. 또한, 침수가 발생하는 지역의 강우지속시간 및 강우량에 의한 침수위를 산정하여 재해상황 대응 기준표를 작성하였다. 본 연구에서는 강우재현기간 100년에 따른 재해상황 대응 기준표 작성과 강우재현기간 10년-강우지속기간 60분-50mm, 110mm을 기준으로 침수예상도를 작성하였다. 본 연구를 통해 여수시청 인근(학동지구 및 도원지구)에 대한 침수예상도를 얻어낼 수 있으며, 침수예상도를 응용한 기대효과가 있을 것으로 판단된다. 침수예상도를 통해 침수 발생 범위를 예측하여 이를 고려한 침수 시 대피경로 작성, 침수 피해를 저감하기 위한 구조적 대책 수립 방안마련 등에 응용이 가능하며, 여수지역을 제외한 연안도시 지역에도 적용하여 연안도시 침수특성분석 연구에 기여할 수 있을 것이다. 본 연구에서는 침수모의 조건을 한정하여 1개의 시나리오만을 고려했지만, 강우재현기간 및 강우지속시간 등을 보정하여 다양한 시나리오에 대한 분석이 가능하므로, 연안도시 재해 발생 시 대응 및 기준표 작성에 실질적인 기여가 가능할 것으로 판단된다.

• Restorative Dentistry and Endodontics
• /
• v.47 no.1
• /
• pp.13.1-13.13
• /
• 2022

Objectives: This study evaluated the efficacy of 3 reciprocating systems and the effects of 2 instruments for irrigant activation on filling material removal. Materials and Methods: Forty mesiobuccal roots of maxillary molars were prepared up to size 25.06 and obturated. Micro-computed tomography (micro-CT) examination #1 was performed. Teeth were then divided into 4 groups (n = 10), according to the retreatment protocol: (1) manual, (2) Reciproc Blue, (3) WaveOne Gold, and (4) X1 Blue. Micro-CT examinations #2 and #3 were performed after filling removal and repreparation, respectively. Next, all teeth were divided into 2 new groups (n = 20) according to the irrigant activation protocol: XP Clean (XP Clean size 25.02) and Flatsonic (Flatsonic ultrasonic tip). Micro-CT examination #4 was performed after irrigant activation. Statistical analysis was performed with a significance level set at 5%. Results: WaveOne Gold removed a significantly greater amount of filling material than the manual group (p < 0.05). The time to reach the WL was similar for all reciprocating systems (p > 0.05). X1 Blue was faster than the manual group (p < 0.05). Only manual group improved the filling material removal after the repreparation stage (p < 0.05). Both activation protocols significantly improved the filling material removal (p < 0.05), without differences between them (p > 0.05). Conclusions: None of the tested instruments completely removed the filling material. X1 Blue size 25.06 reached the working length in the shortest time. XP Clean and Flatsonic improved the filling material removal.