• Bulletin of the Korean Chemical Society
• /
• v.20 no.6
• /
• pp.689-695
• /
• 1999

Supercritical fluid extraction (SFE), ultrasonic extraction (USE), and accelerated solvent extraction (ASE) were compared with the well known Soxhlet extraction for the extraction of polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins(PCDDs) from the XAD-2 resin which was used to adsorb PCDDs in the atmosphere. XAD-2 resin spiked with five PCDDs was chosen as a sample. The optimum conditions for the extraction of PCDDs by SFE were turned out to be the use of CO2 modified with 10% toluene at 100 ℃ and 350 atm, with 5 min static extraction followed by 20 min dynamic extraction. SFE gave a good extraction rate with good reproducibility for PCDDs ranging from 68 to 98%. The ultrasonic extraction of PCDDs from XAD-2 was investigated and compared with other extractions. A probe type method was compared with a bath type. Two extraction solvents, toluene and acetone were compared with their mixture. The use of their mixture in probe type, with 9 minutes of extraction time, was found to be the optimum condition. The average recovery of the five PCDDs for USE was 82-93%. Accelerated solvent extraction (ASE) with a liquid solvent, a new technique for sample preparation, was performed under elevated temperatures and pressures. The effect of tem-perature on the efficiency of ASE was investigated. The extraction time for a 10 g sample was less than 15 min, when the organic solvent was n-hexaneacetone mixture (1 : 1, v/v). Using ASE, the average recoveries of five PCDDs ranged from 90 to 103%. SFE, USE, and ASE were faster and less laborious than Soxhlet extraction. The former three methods required less solvent than Soxhlet extraction. SFE required no concentration of the solvent extracts. SFE and ASE failed to perform simultaneous parallel extractions because of instrumental limitations.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.319-323
• /
• 1998

Conversion of Gardenia jasminoides yellow pigment into blue-green pigment by 8 bacterial species was examed. Bioconversion pattern can be categorized into three types according to absorption spectra characteristics. The same pattern of the value of ${\Delta}E$ estimated by color differencemeter was also observed. Conversion rate by S. epidermidis was faster than other bacterial species. It took 16 hour for S. epidermidis to convert pigment at $37^{\circ}C$. Gardenia jasminoides yellow pigment and conversion pigment were completely separated by Amberlite XAD column chromatography with $H_2O-MeOH$ solvent system. Storage stability of the conversion pigment was better than Gardenia jasminoides yellow pigment.

• Microbiology and Biotechnology Letters
• /
• v.22 no.1
• /
• pp.85-91
• /
• 1994

The characteristcs of monascus fermentation using a hyperpigment-producing mutant, Monascus sp. J101, were analyzed, and the extractive fermentations employing permeabilizing agents and resin were carried out to increase the productivity of red pigment. And the kinetic analysis was also carried out in case of the monascus fermentation using Amberlite XAD-7. The extracellular content of the red pigment produced by Monascus sp. J101 was about 17% of the total, and the production of pigment was regulated by its own product. The cell growth reached a stationary phase at 48 hours ofter inoculation, whereas the pigment production continued up to 100 hours, which showed the pattern of a mixed growth-associated type. During the fermentation, various permeabilizing agents were added to the culture medium and their effects on pigment production were examined. By adding 0.05% Triton X-100 at 48 hours of cultivation, about an 18% increase in pigment production was accomplished as compared to the control, 12% ethyle acetate and 15% for 0.05% deoxycholate, respectively. When a nonionic adsorbent, Amberlite XAD-7 was added to the culture medium at a concentration of 12.0% at 48 hours of cultivation, the pigment production was enhanced by about 48.9% as compared to the control.

• Archives of Pharmacal Research
• /
• v.27 no.5
• /
• pp.539-543
• /
• 2004

An efficient analytical method was devised for the accurate L-muscone assay in aqueous samples. It involves solid-phase extraction of L-muscone in adsorption mode using XAD-4 as the sorbent and dichloromethane modified with 10% (v/v) methanol as the eluting solvent. The gas chromatographic analysis of the eluate residue dissolved in toluene on a DB-5MS capillary column provided complete resolution of L-muscone from the co-extracted interferences. The overall method showed excellent linearity ($r^2{\geq}$ 0.9994) in the range of 0.1 to 2.0 $\mu\textrm{g}$/mL with good intra- and inter-day precisions (% RSD = 2.5～7.3) and with high extraction recovery rates ($\geq$ 98.1 %). When the present method was applied to a L-muscone herbal drink product, the within-batch RE (%) in the labeled concentration (1.5 $\mu\textrm{g}$/mL) for the three randomly chosen bottles were -2.4, -1.3 and -3.3 with high precision (% RSD $\leq$ 3.1). The present method is considered to be suitable for quality control evaluation on liquid drinks and other complex formulations fortified with L-muscone.

• Analytical Science and Technology
• /
• v.17 no.3
• /
• pp.199-210
• /
• 2004

A new polystyrene-divinylbenzene chelating resin containing 4,5-dihydroxy-naphthalene-2,7-disulfonic acid (chromotropic acid : CTA) as functional group has been synthesized and characterized. The sorption and desorption properties of this chelating resin for Cr(III) ion and Cr(VI) ion including nine metal bloodstain. As a results, FOB test kit could be effectively applied to identification of human blood at chelating resin was stable in acidic and alkaline solution. The Cr(VI) ion is selectively separated from Cr (III) ion at pH 2 and the maximum sorption capacity of Cr(VI) ion is 1.2 mmol/g. In the presence of anions such as $F^-$, $SO{_4}^{2-}$, $CN^-$, $CH_3COO^-$, $NO{_3}^-$, the sorption of Cr(VI) ion was reduced but anions such as $PO{_4}^{3-}$ and $Cl^-$ revealed no interference effect. The elution order of metal ions obtained from breakthrough capacity and overall capacity at pH 2 was Cr(VI)>Sn(II)>Fe(III)>Cu(II)>Cd(II)${\simeq}Pb(II){\simeq}Cr(III){\simeq}Mn(II){\simeq}Ni(II){\simeq}Al(III)$. Desorption characteristics for Cr(VI) ion was investigated with desorption agents such as $HNO_3$, HCl, and $H_2SO_4$. It was found that the ion showed high desorption efficiency with 3 M HCl. As the result, the chelating resin, XAD-16-CTA was successfully applied to separation and preconcentration of Cr (VI) ion from several metal ions in metal finishing works.

• Microbiology and Biotechnology Letters
• /
• v.17 no.2
• /
• pp.121-125
• /
• 1989

Actinomycetes GF 155-2, which produced an extracellular pepsin inhibitor, was isolated from soil samples. Optimal conditions of inhibitor production by flask-shacking culture were 2% glucose, 0.7% polypeptone, initial pH 1.0, culture time 60 hours and temperature 30%. Effect of in-organic salts was not observed. About 5mg of colorless crystalline inhibitor was obtained from 5L culture broth in jar tormentor by means of ammonium sulfate precipitation, methanol extraction, and column chromatographies on Amberlite IR-120, XAD-2 and silicagel 60.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.5
• /
• pp.693-698
• /
• 2002

A method has been described for the determination of Cu(Ⅱ), Pb(Ⅱ), Ni(Ⅱ), Cd(Ⅱ), Mn(Ⅱ) and Fe(Ⅲ) by flame atomic absorption spectrometry (FAAS) after preconcentration on Amberlite XAD-16 resin, using hexamethyleneammonium-hexamethylenedithiocarbamate (HMA-HMDTC) as a chelating agent, and NH3/NH4Cl buffer solution (pH 9). Influences of various analytical parameters such as pH, concentration of nitric acid, amount of analytes, diverse ions and sample volume were investigated. The relative standard deviation (RSD) and the detection limit (LOD) were found in the range of 0.8-2.9% and 0.006-0.277 ㎍/mL,respectively. Recoveries obtained by the column method were quantitative ( >95%) at optimum conditions.The method was applied to the determination of some metal ions in seawater and wastewater samples. A high preconcentration factor (about 150 for seawater and 75 for wastewater samples) and simplicity are the main advantages of this suggested method.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2002.10a
• /
• pp.153-153
• /
• 2002

수돗물의 염소소독 과정에서 부식질의 초기 분해생성물인 MX(Mutagen X)는 수돗물의 전체 돌연변이유발성의 최고 60%까지 차지하는 것으로 알려져 있다. 그러나 존재하는 농도는 수 ng/L로 정량분석을 위해서는 resin을 사용하여 10 ~ 20L의 물을 농축하여야 한다. 이 연구에서 MX의 농축에 사용된 resin은 XAD-4와 XAD-7HP의 1:1 mixture이었으며, 사용 전에 Soxhlet extractor를 사용하여 ethyl acetate와 methanol로 각각 12시간씩 세척하였다. 15L의 물 시료는 37%의 염산으로 pH 2에 맞춘 후 직경 2cm의 유리관에 15cm의 높이로 채워진 resin을 40mL/min의 유속으로 통과시켰다. 유리관에 잔류하는 물은 질소가스로 대부분 불어 제거한 후 ethyl acetate 200mL를 가해 1mL/min의 유속으로 흘려주어 MX를 용출시킨 후 회전증발기로 5mL의 부피까지 농축시키고 10% H$_2$SO$_4$ in MeOH 0.1mL를 가하여 6$0^{\circ}C$에서 methyl ester화하였다. 과포화된 $Na_2$SO$_4$ 수용액 0.3ml를 가한 후 MTBE 0.3mL로 추출하고 GC/ECD로 분석하였다. MX의 회수율은 60% 이상이었으며 일부수돗물 시료에 대해 분석하였다.

• KSBB Journal
• /
• v.9 no.4
• /
• pp.385-394
• /
• 1994

Large scale purification to get antifungal antibiotic KRF-001 of 90% purity, was investigated using preparative HPLC. Crude KRF-001 was purified by XAD-7 adsorption chromatography, acid precipitation and microfiltration. Microfiltration was the most effective isolation method of crude KRF-001. The purification methods using C18 chromatography was convenient compared with the conventional methods. Delta PAK C18 column and Bonda PAK C18 column were adapted large scale purification of KRF-001. Gradient system of prep HPLC using Delta PAK C18 column was more effective. With these conditions, final recovery of KRF-001 yielded 77%.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11a
• /
• pp.258-259
• /
• 2005