• 제목/요약/키워드: X70~X100

검색결과 318건 처리시간 0.029초

$NO_x$ Chemistry Over Rutile $TiO_2$(110) Surfaces

  • 김유권
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.131-131
    • /
    • 2012
  • We present our recent temperature-programmed desorption (TPD) study on catalytic reductions of $NO_x$ such as NO, $NO_2$, and $N_2O$ over rutile $TiO_2$(110) surfaces. Our results indicate that $NO_2$/NO readily reacts to give NO/$N_2O$ desorption at the substrate temperature as low as 100 K/70 K. Interestingly, $N_2O$, however, does not dissociate into $N_2$ and $O_{BBO}$ over the oxygen vacancy on the $TiO_2$(110) surface. Successive reduction of NO and $NO_2$ into $N_2O$ and NO, respectively, leaves oxygen atoms on the $TiO_2$(110) surface in a form of $O_{ad}$, which can induce additional reductive channels of NO and $NO_2$ at higher temperatures up to 400 K. During the repeated TPD cycles of $NO_x$, our x-ray photoelectron spectroscopy (XPS) analysis indicates that no N atom accumulates on the $TiO_2$ surface.

  • PDF

향류식 열교환기에 의하여 멸균된 된장의 미생물군 및 색도 (Microflora and Color of Soybean Paste Sterilized by Counterflow Hat Exchanger)

  • 유승곤;김인호;김종생;최성현;오만진;김용국;이인기
    • KSBB Journal
    • /
    • 제13권6호
    • /
    • pp.724-729
    • /
    • 1998
  • To develop a large scale countercurrent single pass heat exchanger for continuous transportation and sterilization of soybean paste, microflora and color value of sterilized soybean paste were examined at various sterile condition. Aerobes, anaerobes, molds, yeasts and lactic acid bacteria were 5.1 x 107 CFU/g, 7.1 x 107 CFU/g, 2.6 x 105 CFU/g, 4.3 x 106 CFU/g, 1.3 x 107 CFU/g, respectively in raw soybean paste. In gold band ampoule test, aerobes and anaerobes of soybean paste were viable up to 90$^{\circ}C$, but become unviable at 100$^{\circ}C$. Molds decreased rapidly and yeasts decreased slowly from 70$^{\circ}C$. Lactic acid bacteria were unviable at 60$^{\circ}C$ within 10 min. In color test, Hunter L, a, and b values of soybean paste were 50.2, +5.6, and +17.8, respectively. After heating in polyethylene film bag at 80$^{\circ}C$, Hunter values were not so much changed and become 50.2, +4.7, and +19.7, respectively. The micorflora and color of soybean paste sterilized in a large scale heat exchanger system resulted in very similar to those of gold band ampoule and polyethylene film bag by effective heat transfer.

  • PDF

수분함량, 가열온도 및 가열시간에 따른 전분 반죽의 호화특성 (Gelatinization Properties of Starch Dough with Moisture Content, Heating Temperature and Heating Time)

  • 이부용;이창호;이철호
    • 한국식품과학회지
    • /
    • 제27권3호
    • /
    • pp.428-438
    • /
    • 1995
  • Corn starch와 waxy corn starch를 사용하여 중간수분계의 수분함량으로 반죽을 제조하고 수분함량과 가열온도, 가열시간에 따른 전분 반죽의 호화양상을 밝혀 보고자 하였다. Corn starch와 waxy corn starch의 amylograph 호화 특성은 1% CMC를 첨가하여 측정한 호화개시 온도가 모두 약 $64^{\circ}C$로 나타났다. DSC특성은 corn starch호화 개시 온도가 $68.15^{\circ}C$, 최대호화온도가 $74.01^{\circ}C$, 호화종결 온도가 $85.65^{\circ}C$, 호화엔탈피는 3.2 cal/gram이었으며, waxy corn starch의 호화개시온도는 $68.24^{\circ}C$, 최대호화온도 $75.43^{\circ}C$, 호화종결온도 $93^{\circ}C$, 호화엔탈피는 4.2 cal/gram으로 나타났다. 수분함량$(X_1)\;36{\sim}52%)$, 가열온도$(X_2)\;60{\sim}100^{\circ}C$, 가열시간$(X_3)$ $0{\sim}2.0$분으로 가열시 corn starch와 waxy corn starch 반죽의 호화도(Y) 변화를 실험계획법으로 조사한 반응표면 회귀 방정식은 corn starch 반죽의 경우 $Y=28.659+8.638\;X_1+15.675\;X_2+7.770\;X_3-1.620\;{X_1}^2+10.790\;X_1X_2-4.220\;{X_2}^2+0.510\;X_1X_3+1.980\;X_2X_3-6.850\;{X_3}^2$ $(R^2=0.9714)$ 이었고 waxy corn starch 반죽의 경우는 $Y=32.617+12.535\;X_1+20.470\;X_2+8.608\;X_3+4.093\;{X_1}^2+13.550\;X_1X_2-4.467\;{X_2}^2+1.560\;X_1X_3+2.160\;X_2X_3-9.527\;{X_3}^2$ $(R^2=0.9621)$이었다. 즉 수분함량과 가열온도, 가열시간이 증가할수록 반죽의 호화도는 모두 증가하는 경향을 나타내었고 같은 조건에서는 waxy corn starch가 corn starch 반죽보다 $10{\sim}20%$ 정도 더 호화되는 것을 알 수 있었다. Corn starch 와 waxy corn starch 반죽의 호화 속도를 보면 가열온도 $70^{\circ}C$$80^{\circ}C$에서는 가열시간 0.5분 이내에서 비교적 빠른 속도로 반죽이 호화되고 가열시간이 그 이상으로 증가할 때도 반죽의 호화가 약간은 진행되지만 $90^{\circ}C$ 이상의 가열온도에서는 가열시간 0.5분 이내에 반죽의 호화가 급속히 일어나고 가열 시간을 증가시켜도 더이상의 호화는 일어나지 않았다. 같은 조건에서는 waxy corn starch 반죽의 호화 속도가 corn starch보다 더 빠른 것으로 나타났다. 대표적으로 52% 수분함량에서 반응속도상수(k)와 가열온도(T)사이의 관계식은 corn starch의 경우 $logk=11.1140-4.1226{\times}10^3(1/T)$, waxy corn starch의 경우 $logk=10.1195-3.7090{\times}10^3(1/T)$이었다.

  • PDF

The study of physical properties of the metal / graphite composite

  • 박명성;전명표;조정호;남중희;최병현;남산;박수병
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 추계학술대회 논문집
    • /
    • pp.98-98
    • /
    • 2009
  • 본 연구에서는 금속과 Graphite로 구성된 (100-x) Fe - x Graphite (x=40, 50, 60, 70, 80 wt%) 복합체의 기계적 특성(열팽창계수, 압축강도) 및 미세구조를 조사하였다, Fe-Grphite 복합체 제조는 각각의 Fe와 graphite 분말을 건식 혼합한 후, Hot press 사용해 온도 $1100^{\circ}C$, 압력 7ton 에서 복합체를 제조하였다. 제작된 시편은 SEM을 통하여 미세구조를 관찰하였고, Grphite 함량에 따른 열팽창계수 및 압축강도의 측정 값이 변화를 조사하였다. Graphite 함량이 증가함에 따라 열팽창계수는 감소하였으며 또한 압축강도도 감소하였다.

  • PDF

고압용 적층 세라믹 캐패시터 설계 및 제작 (The Design and Fabrication of High Voltage Munltilayer Creamic Capacitors)

  • 윤중락;김민기;이헌용;이석원
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
    • /
    • pp.586-589
    • /
    • 2004
  • Ni 내부전극을 적용한 X7R의 온도특성을 가지는 고압용 적층 칩 캐패시터를 설계, 제작하였으며 제작된 캐패시터 신뢰성을 검토하였다. 고압용 캐패시터 설계시 절연파괴전압과 유전체 두께간의 최적의 두께가 있음을 볼 수 있으며 그린시트 두께 24 um의 경우 weibull 계수는 13.38, 단위 절연파괴전압은 70 [V/um]을 얻을 수 있었다. X7R 3216, 100 [nF] 정격전압 250[V] 캐패시터를 설계하여 절연파괴전압은 최고 1.29 [KV]인 고압용 칩 캐패시터를 제작하였다. 적층 칩 캐패시터 절연파괴 모드는 유전체 층간의 절연파괴와 더불어 내부전극과 외부 전극 또는 세라믹 소체와의 절연파괴 모드가 나타남을 볼 수 있다.

  • PDF

태양열 집속기 설계 및 열 특성시험 (A New Solar Concentrator Design and Its Characteristics Measurements)

  • 황우성;양윤섭
    • 한국에너지공학회:학술대회논문집
    • /
    • 한국에너지공학회 1998년도 추계 학술발표회 논문집
    • /
    • pp.216-221
    • /
    • 1998
  • Concentrators with concentration ratios between 1.2X-2.0X do not require sun-tracking or seasonal adjustments. Therefor, well designed such a system is more economical as well as abtainable much higher temperature (100-35$0^{\circ}C$) than a flat plate can achieve. In the present study, a 2X tubular concentrator is constructed and tested. The design was based on a new theory. The results of this preliminary study show that its efficiency is 60-70% at the operating temperature range of 80-10$0^{\circ}C$, and the U-value of -3.0 W/$m^2$$^{\circ}C$.

  • PDF

Sn 첨가에 따른 극미세 Ti-Fe-Sn 합금의 미세조직 및 기계적 성질 변화 (Sn Effects on Microstructure and Mechanical Properties of Ultrafine Ti-Fe-Sn Alloys)

  • 한준희;송기안;피동혁;방창욱;김기범
    • 한국주조공학회지
    • /
    • 제28권2호
    • /
    • pp.69-73
    • /
    • 2008
  • In the present study, microstructural evolution and mechanical properties of Ti-Fe-Sn ultrafine eutectic alloys have been investigated. Ultrafine eutectic microstructure consisting of a mixture of ${\beta}$-Ti solid solution and TiFe intermetallic compound homogeneously formed in $(Ti_{70.5}Fe_{29.5})_{100-x}Sn_x$ alloys with x = 0, 1 and 3. Addition of Sn is effective to modify the eutectic colony into the spherical shape with decreasing the lamellar spacing and colony size. This results in enhancing the macroscopic plasticity up to 3.1% of the Ti-Fe-Sn ultrafine eutectic alloys.

Simulating the impact of iodine as a contrast substance to enhance radiation to the tumor in a brain x-rayphototherapy

  • M. Orabi
    • Nuclear Engineering and Technology
    • /
    • 제55권5호
    • /
    • pp.1671-1676
    • /
    • 2023
  • The influence of adding iodine as a contrast substance to elevate radiation in a tumor is studied using simulation techniques of Monte-Carlo. The study is carried on a brain cancer by adopting an unsophisticated head phantom. The ionizing radiation source is an external beam of x-rays with energy range of a few tens of keV. The expected radiation dose increment due to adding the iodine is investigated by comparing the radiation in the tumor after and before adding the iodine and calculating the ratio between the two doses. Several concentrations of the contrast substance are used to quantify its impact. The change of the dose increment with the source energy is also examined. It is found that the radiation elevation in the tumor tends to saturate with increasing the iodine concentration, and for the studied domain of energies (30 keV-100 keV), the radiation dose enhancement factors (RDEF) for the different iodine concentrations (1%-9%) show peaked curves, with the peak occurring between 60 keV and 70 keV. For the highest concentration studied, 9%, the peak value is almost 7.

2 MWe 순환유동층 발전 플랜트에서 유연탄과 북한 무연탄 혼소시험 특성 연구 (A Study of Co-Combustion Characteristics of North Korean Anthracite and Bituminous Coal in 2 MWe CFBC Power Plant)

  • 한근희;현주수;최원길;이종섭
    • Korean Chemical Engineering Research
    • /
    • 제47권5호
    • /
    • pp.580-586
    • /
    • 2009
  • 본 연구에서는 2 MWe 규모 순환유동층 발전소에서 중국산 유연탄과 북한산 무연탄의 혼합연소특성을 실험적으로 고찰하였다. 중국유연탄과 호주유연탄을 과잉공기량과 층온도 등을 변수로 실험한 결과, 연소효율은 석탄입자의 입도와 석탄중의 휘발분의 영향을 받으며, 이 때 미연탄소분은 Fly ash 5~7%, 바닥회 0.3% 수준으로 중국 유연탄의 연소효율은 99.5% 이상을 보였다. 북한산 무연탄과 유연탄의 혼소시 혼합비 20%에서 무연탄의 평균입도가 작아 연소실에서 비산되는 입자로 인해 연소효율은 5% 이상 저하되었다, 그러나 $SO_2$와 NOx의 배출농도는 크게 변화하지 않았다. 배출되는 대기오염물질의 농도는 $NO_x$ 200~250 ppm($O_2$ 6%), $SO_2$ 100~320 ppm($O_2$ 6%)이었다. SCR 공정에서 2~13 l/min 범위의 $NH_3$ 공급으로 30~65%의 $NO_x$가 저감되었다. Limestone을 이용한 노내탈황에서 약 Ca/S 몰비 6.5를 공급했을 때 $SO_2$가 75% 제거되었고, $Mg(OH)_2$를 흡수제로 하는 FGD를 운전했을 때 pH 5.0 이상에서 100% 탈황효과를 보였다.