• 한국결정학회지
• /
• 제8권2호
• /
• pp.105-110
• /
• 1997

CdS/CuInSe2 태양전지에서 창측재료로 1μm 두께의 CdS박막을 1x10-3mTorr의 진공하에서 CdS source 온도를 800-1100'C로 하고 기판의 온도를 50-200℃로하여 진공증차겁으로 제조하였다. 증착된 CdS박막의 구조적, 전기적, 광학적 특성조사는 x-ray diffractometer(XRD), scanning electron microscope(SEM), 전기비저항 측정, Hall measurement 그리고 optical transmission spectra로 행하였고, 각막들의 성분분석은 energy dispersive analysis of X-ray (EDAX)를 가하나, 광투과도는 감소하였다. 이때 증착된 CdS 박막들은 모두 hexagonal 구조를 가지고 있었으며, 결정성은 기판유리를 딸 (002)면으로 형성되었다. CdS Source 온도가 1000℃에서 증착된 CdS 박막이 0.9(S/cm)의 가장 높은 전기 전도도를 나타내었다. 또한 기판온도를 100'C로 제조한 CdS 박막이 전기비저항은 40(Ω,cm)이었고 광투과도는 80% 이상의 값을 나타내어 CdS/CuInSe2 태양전지의 창측재료로 적합했다.

• 한국재료학회지
• /
• 제11권8호
• /
• pp.671-678
• /
• 2001

$RuO_2$ 박막을 전극으로 하여 Pt/Ti/Si 기판 위에 $RuO_2$ /LiPON/$RuO_2$의 다층 구조로 이루어진 전고상의 박막형 마이크로 슈퍼캐패시터를 제작하였다. 전극용 $RuO_2$박막은 반응성 dc 마그네트론 스퍼터를 이용하여 $O_2$/[Ar+$O_2$]비를 증가시키며 성장시켰고, 비정질 LiPON 고체전해질 박막은 순수한 질소분위기 하에서 rf 스퍼터링으로 성장시켰다. 상온에서의 충-방전 측정을 통해 $RuO_2$ 박막의 미세구조에 따라 슈퍼캐패시터의 사이클 특성이 영향을 받는 것을 알 수 있었다. Glancing angle x-ray diffraction(GXRD)과 transmission electron microscopy (TEM) 분석을 통해 산소 유량의 증가가 $RuO_2$박막의 미세 구조의 영향을 주는 것을 알 수 있었고, X-ray photoelectron spectroscopy (XPS) 분석을 통해 산소 유량 비의 증가가 Ru과 산소간의 결합에도 영향을 줌을 알 수 있었다. 또한 사이클 후 슈퍼캐패시터의 TEM 및 AES depth profiling 분석을 통해, 충-방전 시 $RuO_2$와 LiPON과의 계면반응에 의해 형성된 계면 층이 사이클 특성에 영향을 줌을 알 수 있었다.

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.563-569
• /
• 1996

Degradation of $Zn_3N_2$ films is studied by using several analytical techniques. Polycrystalline $Zn_3N_2$ films prepared by reactie rf magnetron sputtering are kept in the air. Electrical and optical properties are measured by using van der Pauw technique and double-beam spectrometry. Structure and chemical bonding states are studied by X-ray diffraction(XRD), Fourier transfer infrared ray spectroscopy(FT-IR) and X-ray photoelectron specroscopy (XPS). Significant differences are observed in optical properties between the degraded film and the ZnO film. XRD analysis reveals that the degraded film contains very small ZnO grains because very weak and broad ZnO peaks are observed. XPS and FT-IR measurements reveal the formation of $Zn(OH)_2$ in the degraded film. The existence of N-H bonds in degraded films is exhibited from the N 1s spectra. $Zn_3N_2$ change into the mixture of ZnO, $Zn(OH)_2$ and an ammonium salt.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.913-916
• /
• 2006

In this study, we conducted machinery analysis, such as differential thermal analysis, X-ray diffraction analysis and scanning electron microscope analysis, in order to predict fire temperature and to analyze fire damage in the case of fire on concrete structure. according to the machinery analysis and differential thermal analysis, concrete bought big creak over $300^{\circ}C$. these result can be utilized as good data in design for repair and reinforcement through rationally evaluating fire damage on concrete structure exposed to high heat or fire in the future.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.371-374
• /
• 2002

Bismuth lanthanum titanate thin films with excess Bi contents were prepared onto Pt/Ti/$SiO_2$/Si substrate by metalorganic decomposition (MOD) technique. The structure and morphology of the films were analyzed using X-ray diffraction (XRD) and atomic force microscopy (AFM), respectively. From the XRD analysis, BLT thin films show polycrystalline structure and the layered-perovskite phase was obtained over 10% excess of Bi contents. As a result of ferroelectric characteristics related to the Bi content of the BLT thin film, the remanent polarization and dielectric constant decreased with increasing over Bi content of 10 % excess. The BLT film with Bi content of 10% excess was measured to have a dielectric constant of n9 and dielectric loss of 1.85[%]. The BLT thin films showed little polarization fatigue test up to 3.5 x $10^{9}$ bipolar switching cycling.

• 천문학회보
• /
• 제36권2호
• /
• pp.89.1-89.1
• /
• 2011

We have investigated a coronal jet near the limb on 2010 June 27 by Hinode/X-Ray Telescope (XRT), EUV Imaging Spectrograph (EIS), Solar Optical Telescope (SOT), SDO/Atmospheric Imaging Assembly (AIA), and STEREO. From EUV (AIA and EIS) and soft X-ray (XRT) images we identify the erupting jet feature in cool and hot temperatures. It is noted that there was a small loop eruption in Ca II images of the SOT before the jet eruption. Using high temporal and multi wavelength AIA images, we found that the hot jet preceded its associated cool jet. The jet also shows helical-like structures during the rising period. According to the spectroscopic analysis, the jet structure changes from blue shift to red one with time, implying the helical structure of the jet. The STEREO observation, which enables us to observe this jet on the disk, shows that there was a dim loop associated with the jet. Comparing the observations from the AIA and STEREO, the dim loop corresponds to the jet structure which implies the heated loop. Considering that the structure of its associated active region seen in STEREO is similar to that in AIA observed 5 days before, we compared the jet morphology on the limb with the magnetic fields extrapolated from a HMI vector magnetogram observed on the disk. Interestingly, the comparison shows that the open field corresponds to the jet which is seen as the dim loop in STEREO. Our observations (XRT, SDO, SOT, and STEREO) are well consistent with the numerical simulation of the emerging flux reconnection model.

• 한국정보전자통신기술학회논문지
• /
• 제15권5호
• /
• pp.321-327
• /
• 2022

본 논문에서는 UV/Ozone 처리를 통해 Polydimethylsiloxane(PDMS) 표면에 주름 구조를 형성하고, 물리화학적 특성 분석을 통해 줄금 구조 형성 메커니즘을 밝혔다. 30분의 UV/Ozone 처리를 통해 PDMS 표면에 주름 구조를 형성하였으며, 주사전자현미경의 단면 촬영으로 PDMS 표면의 주기적인 주름 형성을 확인할 수 있었다. 또한, XPS 스펙트럼 분석을 통해 PDMS 표면에 SiOx의 실리카 경질 표면이 UV/Ozone에 의해 만들어지는 것을 확인하였고, PDMS 표면의 경질층과 내부의 연질층 사이의 탄성 계수 불일치는 PDMS의 주름 형성의 팽윤 메커니즘을 확인시켜 준다. 본 연구 결과는 UV/Ozone 처리에 의한 PDMS 표면의 주름 구조 형성 메커니즘의 이해도를 향상시킬 뿐만 아니라, 향후 UV/Ozone 조사 조건에 따라 주름 구조의 진폭과 주기를 조정하는데 기초 연구로 쓰일 수 있을 것이다.

• 한국재료학회지
• /
• 제19권12호
• /
• pp.667-673
• /
• 2009

The electrocatalytic characteristics of oxygen reduction reaction of the $PtxM_{(1-x)}$ (M = Co, Cu, Ni) supported on multi-walled carbon nanotubes (MWNTs) have been evaluated in a Polymer Electrolyte Membrane Fuel Cell (PEMFC). The $Pt_xM_{(1-x)}$/MWNTs catalysts with a Pt : M atomic ratio of about 3 : 1 were synthesized and applied to the cathode of PEMFC. The crystalline structure and morphology images of the $Pt_xM_{(1-x)}$ particles were characterized by X-ray diffraction and transmission electron microscopy, respectively. The results showed that the crystalline structure of the Pt alloy particles in Pt/MWNTs and $Pt_xM_{(1-x)}$/MWNTs catalysts are seen as FCC, and synthesized $Pt_xM_{(1-x)}$ crystals have lattice parameters smaller than the pure Pt crystal. According to the electrochemical surface area (ESA) calculated with cyclic voltammetry analysis, $Pt_{0.77}Co_{0.23}$/MWNTs catalyst has higher ESA than the other catalysts. The evaluation of a unit cell test using Pt/MWNTs or $Pt_xM_{(1-x)}$/MWNTs as the cathode catalysts demonstrated higher cell performance than did a commercial Pt/C catalyst. Among the MWNTs-supported Pt and $Pt_xM_{(1-x)}$ (M = Co, Cu, Ni) catalysts, the $Pt_{0.77}Co_{0.23}$/MWNTs shows the highest performance with the cathode catalyst of PEMFC because they had the largest ESA.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제16권6호
• /
• pp.122-132
• /
• 2011

Mercury accumulates in biota mainly as methylmercury. In nature, methylmercury shows high affinity to organic matter and $CH_3Hg^+$-organic matter complexation affects the mobility and bioavailabiity of methylmercury. In this study, we examined the methylmercury binding sites in an aquatic humic acid as affected by the pH condition using Hg $L_{III}$-edge extended X-ray absorption fine structure (EXAFS). We evaluated methylmercury binding humic ligands using methylmercury-thiol, methylmerury-carboxyl, and methylmercury-amine complexation models. When $CH_3Hg^+$-to-humic reduced sulfur ratio is 0.3, we found that most of $CH_3Hg^+$ binds to thiol ligands at pH 5 and 7. At pH 7, however, some carboxyl or amine ligand contribution is observed, unlike at pH 5 where $CH_3Hg^+$ almost exclusively binds to thiol ligands. The carboxyl or amine ligand contribution may indicate that some types of thiol ligands in the natural organic matter have relatively low complexation constants or acid dissociation constants compared to those of some carboxyl or amine ligands. Analysis results indicate that ~0.2 fraction of methylmercury binds to amine or carboxyl ligands and ~0.8 to thiol ligands at pH 7.

• 한국잠사곤충학회지
• /
• 제39권1호
• /
• pp.67-72
• /
• 1997

As a condition for obtaining the silk I type crystal that has stability and high reproducibility, after dissolving silk fibroin crystalline part (Fcp), the changes of recrystallized crystal structure according to dialytic pH were examined by x-ray diffraction and differential thermal analysis. The Fcp was obtained from the aqueous solution of silk fibroin enzymatic proteolyzed by chymotrypsin. The crystal structure of Fcp showed silk II type. When the Fcp was dissolved by 10M LiBr aqueous solution, the Fcp1 showed the silk II type at pH 9. However, besides the silk II type, the silk I type structure begins to appear at pH 8 and only the silk I type structure was found below pH 6. On the other hand, the Fcp2 that calcium chloride was used in the dissolution found only the silk I type crystal structure below pH8.