• Korean Journal of Food Science and Technology
• /
• v.48 no.5
• /
• pp.418-423
• /
• 2016

This study was conducted to identify the geographical origin of soybeans in Cheonggukjang by analyzing its organic components and inorganic elements with Fourier transform near-infrared spectroscopy (FT-NIRS) and with energy dispersive X-ray fluorescence (ED-XRF) coupled with multivariate statistical analysis. For method development, 280 samples from various regions were collected and analyzed. The discriminant accuracy for the developed methods was 97.5% for FT-NIRS and 98.0% for ED-XRF with multivariate statistical analysis. A validation test confirmed the discriminant accuracy to be 96.3% for FT-NIRS and 95.0% for ED-XRF. Overall, the results showed that methods using FT-NIRS and ED-XRF could be used to identify the geographical origin of Cheonggukjang.

• Journal of the Korean Chemical Society
• /
• v.43 no.6
• /
• pp.682-690
• /
• 1999

The quaternary random copolyesters of poly (butylene glutarate-co-adipate-co-succinate-co-terephthalate)(PBGAST) were synthesized and charaterized by $^1H-NMR$ spectrometry, DSC method, and X-ray diffractometry. Thus the melting point trends and crystallization behaviors of PBGAST copolyesters were obviously depended on terephthalate content in copolymers as well as reaction condition.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.12
• /
• pp.2477-2480
• /
• 2007

MgAl2O4:Eu3+ red-light emitting powder phosphor was prepared at temperature as low as 500 oC within a few minutes by using the combustion route. The prepared powder was characterized by X-ray diffraction, scanning electron microscopy and Fourier-transform infrared spectrometry. The luminescence of Eu3+-activated MgAl2O4 shows a strong red emission dominant peak around 611 nm, which can be attributed to the 5D0-7F2 transition of Eu3+ ions from the synthesized phosphor particles under excitation (394 nm). Electron paramagnetic resonance (EPR) measurements at the X-band showed that no signal could be attributed to Eu2+ ions in MgAl2O4.

• Journal of the Korean Vacuum Society
• /
• v.12 no.S1
• /
• pp.56-59
• /
• 2003

Wurtzite GaN films are grown by low-pressure MOCVD on (0001)-plane sapphire substrates. The GaN films have a total thickness of 4 $\mu$m with a surface Mg-doped p-type layer, which has a thickness of 0.5 $\mu$m. 90k eV $Mn^{+}$ ions are implanted into the GaN films at room temperature with doses ranging from $1 \times10^{15}$ to $1 \times 10^{16}\textrm{cm}^{-2}$. After an annealing step at $770^{\circ}C$ in flowing $N_2$, the structural characteristics of the $Mn^{+}$ implanted GaN films are studied by X-ray diffraction (XRD), Rutherford backscattering spectrometry (RBS) and atomic force microscopy (AFM). The structural and morphological changes brought about by $Mn^{+}$ implantation and annealing are characterized.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.285-288
• /
• 1997

Generally the high dielectric films, such as PZT(Pb(Z $r^{1-x}$ $Ti_{x}$ ) $O_3$) and BST(B $a_{l-x}$S $r_{x}$ Ti $O_3$) have been formed on the Pt thin films. However it is generally known that the dry etching of Pt is difficult because of its chemical stability. So, the dry etching of Pt remains at the preliminary work. Therefore, in this study, Pt etching mechanism was investigated with Ar/C $l_2$gas plasma by using XPS(X-ray photoelectron spectroscopy) and QMS(Quadrupole mass spectrometry). Ion current density was measured with Ar/C $l_2$gas plasma by using single Langmuir probe. XPS results shoved that the atomic % of Cl element on the etched Pt sample increased with increasing Ar/(Ar+C $l_2$). And QMS results showed that the increase of Ar partial pressure in the plasma resulted in the improvement of C $l_2$dissociation and Cl redical formation and simultaniously the increase of ion bombardment effects.s.s.

• Korean Journal of Food Science and Technology
• /
• v.52 no.2
• /
• pp.125-129
• /
• 2020

In this study we developed a method for determining the geographic origin of soybeans by combining energy dispersive X-ray fluorescence spectrometry with statistical analysis. In 2018, 197 soybean samples (100 Korean domestic samples and 97 foreign samples) were collected for the construction of a geographic origin model. The mineral concentrations of 26 elements were measured and determined via the fundamental parameters approach. One-way analysis of variance, t-test, and canonical discriminant analysis were employed to reveal five elements (P, Ni, Br, Zn, and Mn) that could be used for the determination of geographic origins. The sensitivity, specificity, and efficiency for the above method were 91.0, 95.9, and 93.4%, respectively. Validation results from 60 samples collected in 2019 showed a predictive rate of 93.3% for Korean domestic soybeans and 100.0% for foreign soybeans. In conclusion, the combination of energy dispersive X-ray fluorescence spectrometry and chemometrics could be used to effectively determine the geographic origin of soybeans.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.6
• /
• pp.722-726
• /
• 1993

Organotin(IV) complexes of ylidenemalonates $(R_xSn)_{x-1}(O_2C)_2C=C(SR')_2\;(R=n-C_4H_9,\;C_6H_5,\;cyclo-C_6H_{11},\;CH_3OOCCH_2CH_2;\;x=2,3;\;R'=CH_3,\;R_2'=-CHCH-,\;-CH_2CH_{2^-})$ have been synthesized and characterized by means of various spectroscopic methods. The X-ray crystal structure of $(Ph_3Sn)_2(O_2C)_2C=C(SCH_3)_2$ has been determined (Pi; a= 9.704(2) ${\AA}$, b= 14.412(1) ${\AA}$, c= 14.760(3) ${\AA}$, ${alpha}$=74.26(1)$^{\circ}$, ${beta}$=99.38(l)$^{\circ}$, ${\gamma}$=79.09(1)$^{\circ}$, $V= 1950.7(7){\AA}^3$) and refined to R= 0.045. The crystal structure discloses a discrete molecule with bidentate-like carboxylate ligand. For diorganotin analogues, the structures are discussed in terms of IR, $^1H-NMR,\;^{13}C-NMR$, and FAB mass spectrometry. The mass spectrum indicates that the diorganotin complexes of ylidenemalonates are dimeric.

• Journal of Conservation Science
• /
• v.12 no.1 s.15
• /
• pp.1-14
• /
• 2003

Chemical characteristics of whitewares excavated from the of official kiln of the Choseon Dynasty period in Gwangju, Gyeonggido have been stuied using x-ray diffraction, inductively coupled plasma atomic absorption spectrometry and energy dispersive spectrometry. This study shows that most of whitewares excavated from the kiln site are similar in chemistry to each other regardless of their excavated positions and that the their bodies were not made of feldspar minerals. However, the whiteware from sedimentation 1 of waste articles shows mineralogical characters different from those of other sites. This result is in accordance with the report that the whitewares from sedimentation 1 of waste articles have characters different from other sites. The whiteware glaze was produced from raw minerals of both lime and alkali-lime system resulting in wide variation in chemical composition.

• Korean Journal of Materials Research
• /
• v.1 no.4
• /
• pp.191-197
• /
• 1991

The surface roughnesses of titanium silicide films and the diffusion behaviours of dopants in single crystal and polycrystalline silicon substrates durng titanium silicide formation by rapid thermal annealing(RTA) of sputter deposited Ti-filicide film from the composite $TiSi_{2.6}$ target were investigated by the secondary ion mass spectrometry(SIMS), a four-point probe, X-ray diffraction, and surface roughness measurements. The as-deposited films were amorphous but film prepared on single silicon substrate crystallized to the orthorhombic $TiSi_2$(C54 structure) upon rapid thermal annealing(RTA) at $800^{\circ}C$ for 20sec. There was no significant out-diffusion of dopants from both single crystal and polycrystalline silicon substrate into titanum silicide layers during annealing. Most of the implanted dopants piled up near the titanium silicide/silicon interface. The surface roughnesses of titanium silicide films were in the range between 16 and 22nm.

• Journal of Powder Materials
• /
• v.16 no.5
• /
• pp.363-369
• /
• 2009

The amorphization process and the thermal properties of amorphous Ti$_{40}$Cu$_{40}$Ni$_{10}$Al$_{10}$ powder during milling by mechanical alloying were examined by X-ray diffractometry (XRD), differential scanning calorimetry (DSC), and transmission electron microscopy (TEM). The chemical composition of the samples was examined by an energy dispersive X-ray spectrometry (EDX) facility attached to the scanning electron microscope (SEM). The as-milled powders showed a broad peak (2$\theta$ = 42.4$^{\circ}$) with crystalline size of about 5.0 nm in the XRD patterns. The entire milling process could be divided into three different stages: agglomeration (0 < t$_m$ $\leq$ 3 h), disintegration (3 h < t$_m$ $\leq$ 20 h), and homogenization (20 h < t$_m$ $\leq$ 40 h) (t$_m$: milling time). In the DSC experiment, the peak temperature T$_p$ and crystallization temperature T$_x$ were 466.9$^{\circ}C$ and 444.3$^{\circ}C$, respectively, and the values of T$_p$, and T$_x$ increased with a heating rate (HR). The activation energies of crystallization for the as-milled powder was 291.5 kJ/mol for T$_p$.