• 대한방사선기술학회지:방사선기술과학
• /
• 제33권4호
• /
• pp.335-340
• /
• 2010

T형 금속판을 이용한 요골 원위부 골절 수술 후 나사못의 요골구 관통 유무를 확인하기 위한 요골구 촬영 방법을 알아보고자 하였다. Wrist CT 환자 51명의 3D 영상과 건조된 요골 표본 20본에서 요골구 각도를 분석하였고, 석고를 이용하여 요골 모형을 제작 한 다음 나사못이 요골구를 2.4 mm 관통 하도록 하고 요골구 원위부 거상 각도 및 외회전 각도를 0~30도까지 5도씩 변화시켜 X-선 영상으로 촬영하였다. 그 결과 요골구 각도는 Wrist CT 영상에서 평균 14.4도, 건조된 요골 표본에서 평균 16.3도였다. 요골 모형에서 요골구를 관통한 나사못의 길이는 거상 각도 및 외회전 각도에 따라 묘출 정도가 다름을 알 수 있었다. 결론적으로 T형 금속판을 이용한 요골 원위부 골절 수술 후 나사못의 요골구 관통을 알기 위한 접선방향촬영에서 요골 원위부 거상각은 $5^{\circ}$, 외회전 각은 $20^{\circ}$를 추천한다.

• Advances in concrete construction
• /
• 제9권5호
• /
• pp.449-457
• /
• 2020

The influence of subsequent curing on the performance of fly ash contained mortar under steam curing was studied. Mortar samples incorporated with different content (0%, 20%, 50% and 70%) of Class F fly ash under five typical subsequent curing conditions, including standard curing (ZS), water curing(ZW) under 25℃, oven-dry curing (ZD) under 60℃, frozen curing (ZF) under -10℃, and nature curing (ZN) exposed to outdoor environment were implemented. The unsteady chloride diffusion coefficient was measured by rapid chloride migration test (RCM) to analyze the influence of subsequent curing condition on the resistance to chloride penetration of fly ash contained mortar under steam curing. The compressive strength was measured to analyze the mechanical properties. Furthermore, the open porosity, mercury intrusion porosimetry (MIP), x-ray diffraction (XRD) and thermogravimetric analysis (TGA) were examined to investigate the pore characteristics and phase composition of mortar. The results indicate that the resistance to chloride ingress and compressive strength of steam-cured mortar decline with the increase of fly ash incorporated, regardless of the subsequent curing condition. Compared to ZS, ZD and ZF lead to poor resistance to chloride penetration, while ZW and ZN show better performance. Interestingly, under different fly ash contents, the declining order of compressive strength remains ZS>ZW>ZN>ZD>ZF. When the fly ash content is blow 50%, the open porosity grows with increase of fly ash, regardless of the curing conditions are diverse. However, if the replacement amount of fly ash exceeds a certain high proportion (70%), the value of open porosity tends to decrease. Moreover, the main phase composition of the mortar hydration products is similar under different curing conditions, but the declining order of the C-S-H gels and ettringite content is ZS>ZD>ZF. The addition of fly ash could increase the amount of harmless pores at early age.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.163.2-163.2
• /
• 2010

In this work, nano-flake shaped nickel oxide (NiO) films were synthesized by chemical bath deposition technique for electrochemical capacitors. The deposition was carried out for 1 and 2 h at room temperature using nickel foam as the substrate and the current collector. The structure and morphology of prepared NiO film were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). And, electrochemical properties were characterized by cyclic voltammetry, galvanostatic charge-discharge, and AC impedence measurement. It was found that the NiO film was constructed by many interconnected NiO nano-flakes which arranged vertically to the substrate, forming a net-like structure with large pores. The open macropores may facilitate the electrolyte penetration and ion migration, resulted in the utilization of nickel oxide due to the increased surface area for electrochemical reactions. Furthermore, it was found that the deposition onto nickel foam as substrate and curent collector led to decrease of the ion transfer resistance so that its specific capacitance of a NiO film had high value than NiO nano flake powder.

• Corrosion Science and Technology
• /
• 제18권6호
• /
• pp.232-242
• /
• 2019

In this study, hydrophobically modified fumed silica was added to the PVDF coating to improve corrosion protection performance. Two types of silane modifiers, trimethylchlorosilane (TMCS) and hexamethyldisilazane (HMDZ), were used for hydrophobic modification of the fumed silica. The composition of modified fumed silica was analyzed by Fourier transform infrared, X-ray photoelectron spectroscopy, and elemental analysis. The dispersion of modified fumed silica in the PVDF coating was observed by the transmission electron microscopy, and the hydrophobicity of PVDF coating was analyzed by the water contact angle. Surface properties were examined by the field emission scanning electron microscopy and scanning probe microscopy. Potentiodynamic polarization was conducted to confirm corrosion protection performance of PVDF coating in terms of hydrophobically-modified fumed silica contents. As a result, the average surface roughness and the water contact angle of the PVDF coating increased with modifier contents. The results of the potentiodynamic polarization test showed an increase of the E_corr values with increase of the hydrophobicity of PVDF coating. Thus, it clearly indicates that the corrosion protection performance of PVDF coating improved with the addition of the hydrophobic-modified fumed silica that prevents the penetration of moisture into the PVDF coating.

• 약학회지
• /
• 제54권4호
• /
• pp.300-308
• /
• 2010

Adrenoceptor has been considered to be an important target in psychiatric disorders. Based on x-ray structures of bovine rhodopsin, we established homology model of ${\alpha}_{2c}$-adrenoceptor (ADA2C_rat) and then analyzed docking from binding model of receptor-ligand complex with high-active compound No.29 in tricyclic isoxazole analogues (1-30). We observed that the N (1.907 $\AA$) and O (1.712 $\AA$) atoms of isoxazole ring on the docked ligand (No.29) formed H-bonding interaction with O-H of Ser5.32 and carmeron phenyl ring centroid of tricyclic isoxazole formed $\pi-\pi$ interaction at 3.342 $\AA$ distance with phenyl ring centroid of Phe6.52. According to predictions of blood-brain distribution (logBB) through penetration of blood-brain barrie (BBB) and polar surface area (PSA) of the ligands, the high-active compound No.29 has values of logBB=-0.203, PSA=67.50, respectively. These results suggest that the high-active compound No.29 is a novel anti-depressant with the characteristics such as dopamine and serotonin.

• Journal of the Korean Wood Science and Technology
• /
• 제34권4호
• /
• pp.9-14
• /
• 2006

PEG처리재의 치수안정성 기구를 조사하기 위해 에너지분산스펙트럼분석법(SEM-EDS)을 이용하여 세포벽 내에 존재하는 PEG분자들의 분포를 분석하였다. 주사전자현미경으로 관찰한 결과, 무처리재의 세포들은 건조에 의한 수축이 발생하여 세포들이 찌그러진 형태를 나타냈지만, PEG처리재의 세포는 세포벽이 무처리재에 비해 다소 팽윤되었고, 세포들은 거의 원형을 유지하고 있었다. SEM-EDS법으로 분석한 결과, 세포벽에 K이온이 고르게 분포되어 있는 것이 관찰되었다. 따라서 PEG분자는 세포벽 내까지 침투하여 목재의 치수안정성 증대에 기여하는 것이 확인되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제23권2호
• /
• pp.77-82
• /
• 1995

With the aim to utilize pine wood(Pinus densiflora Sieb. et Zucc.) as an interior building materials, such as flooring material, monoethylene glycol(MEG) resin solution was impregnated into greenwood. Specimens of three different qualities, that is, normal wood, resinous wood and compression wood, were prepared. Distribution of resin element(phosphorus) in MEG resin solution-impregnated woods and preservative effectiveness against brown rot fungi(Tyromyces palustris and Serpula lacrymans) of these woods were investigated. The results were as follows: 1. The concentration of phosphorus into cell walls of resinous wood and compression wood was lower compared to that of normal wood. This shows that the quality of wood has an influence on the penetration of MEG resin solution into the wood. It was shown from a leaching test that MEG resin could be leached out easily from the cell walls. 2. The resinous wood and compression wood, even without MEG resin solution impregnation had high decay resistance. For normal wood, significant improvement of preservative effectiveness was observed after impregnation of MEG resin solution. It was shown that MEG resin was leached out from the woods after leaching test, resulting in the reduction of preservative effectiveness. From this result, suitability of MEG resin solution-impregnated woods as an interior materials was recognized.

• Journal of Welding and Joining
• /
• 제31권5호
• /
• pp.64-70
• /
• 2013

The joining of Ti and SUS304 dissimilar metals is one of the effective measures to save rare metal. But Ti and SUS304 have differences in materials properties, and Ti and Fe intermetallic compounds such as TiFe and $TiFe_2$ are easily formed in weld fusion zone between Ti and SUS304. Nevertheless, in this study, full penetration lap dissimilar welding of Ti and SUS304 using single-mode fiber laser with ultra-high welding speed was tried, and it was found out that ultra-high welding speed could control the generation of intermetallic compound. To recognize the formation of intermetallic phase in the weld fusion zone and the compound zone of interface weld area were observed and analyzed using energy dispersive X-ray spectroscopy (EDX). And it was confirmed that the ultra-high welding speed could reduce amount of intermetallic compounds, but the intermetallic compounds were existed in the weld fusion zone under the all conditions.

• 한국철도학회논문집
• /
• 제10권1호
• /
• pp.39-44
• /
• 2007

This rafer explains a durability test of a large train car body made of carbon/epoxy composite material. The composite car body with the length of 23m was manufactured as a sandwich structure composed of an aluminum honeycomb core and CF1263 woven fabric carbon/epoxy faces. In order to evaluate durability of the composite car body, it was excited by two 500kN capacity hydraulic actuators installed underneath the body bolster. The natural frequency of the composite car body under full weight condition was found to be 4.33Hz. Based on this result, the excitation frequency and displacement of 5Hz and ${\pm}1.0mm$, respectively, were used as inputs for the durability test. The test was conducted for $2{\times}10^6$ cycles. During the test, the nondestructive tests using X-ray radiography and dye penetration method was performed to determine the presence of the cracks. Upon completion of the test, no cracks were found.

• 한국초전도ㆍ저온공학회논문지
• /
• 제26권1호
• /
• pp.5-9
• /
• 2024

This study investigated the effect of Kr ion beam irradiation on the superconducting properties of Nb thin films, which are known for their high superconducting transition temperature (T_c) at ambient pressure among single elements. Using the Stopping and Range of Ions in Matter (SRIM) program, we analyzed the distribution of Kr ions and displacement per atom (DPA) after irradiation, finding a direct correlation between irradiation amount and DPA. In samples with stronger beam energy, deeper ion penetration, fewer ions remained, and higher DPA values were observed. X-ray diffraction (XRD) revealed that the Nb (110) peak at 38.5° weakened and shifted with increasing irradiation. T_c decreased in all samples after irradiation, more significantly in those with higher beam energy. Irradiation raised resistivity of the film and lowered the residual-resistivity ratio (RRR). AC susceptibility measurements were also consistent with these findings. This research could potentially lead to more efficient and powerful superconducting devices and a better understanding of superconducting materials.