• 한국멀티미디어학회논문지
• /
• 제12권9호
• /
• pp.1233-1241
• /
• 2009

골다공증은 45세 이상의 여성 50% 이상이 갖고 있는 질환이다. 더욱이 질병의 증상을 환자가 느끼지 못하여 병을 심화시키기 때문에 조기 진단으로 골다공증을 예방하는 것이 중요하다. 이를 위해 골밀도(Bone Mineral Density)의 효과적인 측정을 위한 다양한 연구가 국내외적으로 수행되고 있다. 골밀도 측정을 위해서는 X-선 영상이 활용되고 있으며, 이 중에서 이중 에너지 X 선 흡수법(DEXA)을 이용하여 골밀도를 측정하는 방법은 많은 관심을 받고 있는 분야이다. DEXA 영상은 서로 다른 두 에너지준위의 X선으로부터 영상을 획득함으로써 생체조직의 중첩에 의한 잡음을 효과적으로 줄여 진단효과를 높이는데 유용하다. 하지만, DEXA 영상에서 골영역을 추출하기 위해서는 실험적으로 계수를 결정해야 하는 문제점이 있다. 본 논문에서는 두 에너지 흡수 영상에서 골영역을 추출하기 위해 실험적으로 결정하는 변수를 X-선 영상의 물리적 의미와 각 에너지에 반응하는 생체조직들의 감쇠상수 특성을 기반으로 분석하여 골영역을 효과적으로 검출하는 방법을 제안한다. 더불어 다양한 영상을 적용한 실험으로 제안한 알고리즘의 효율성을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.572-576
• /
• 1997

X-ray laminography and DT(digital tomosynthesis) that can form a cross-sectional image of 3-D objects promise to be good solutions for inspecting interior defects of industrial products. The major factors of the digital tomosynthesis that influence on the quality of x-ray cross-sectional images are also discussed. The quality of images acquired from the DT system varies according to image synthesizing methods, the number of images used in image synthesizing, and X-ray projection angles. In this paper, a new image synthesizing method named 'log-root method' is proposed to get clear and accurate cross-sectional images, which can reduce both artifact and blurring generated by materials out of focal plane. To evaluate the quality of cross-sectional images, two evaluating criteria: (1) shape accuracy and (2) clearness in the cross-sectional image are defined. Based on this criteria, a series of simulations were performed, and the results show the superiority of the new synthesizing method over the existing ones such as averaging and minimum method.

• Imaging Science in Dentistry
• /
• 제30권3호
• /
• pp.183-188
• /
• 2000

Purpose: This study was to evaluate the beam quality of intraoral X-ray equipments used at Yonsei University Dental Hospital (YUDH) using the half value layer (HVL) and the characteristic curve of intraoral standard X-ray film. Materials and Methods : The study was done using the intraoral X -ray equipments used at each clinical department at YUDH. Aluminum filter was used to determine the HVL. Intraoral standard film was used to get the characteristic curve of each intraoral X-ray equipment. Results: Most of the HVLs of intraoral X-ray equipments were higher than the least recommended thickness, but the REX 601 model used at the operative dentistry department and the X-707 model used at the pediatric dentistry department had HVLs lower than the recommended thickness. The slopes of the characteristic curves of films taken using the PANP AS 601 model and REX 601 model at operative dentistry department, the X-70S model of prosthodontic dentistry department, and the REX 601 model at the student clinic were relatively low. Conclusion: HVL and the characteristic curve of X-ray film can be used to evaluate the beam quality of intraoral X-ray equipment. In order to get the best X-ray films with the least radiation exposure to patients and best diagnostic information in clinical dentistry, X -ray equipment should be managed in the planned and organized fashion.

• 전자공학회논문지
• /
• 제52권10호
• /
• pp.97-107
• /
• 2015

디지털 엑스레이 기기로부터 처음 획득된 엑스레이 영상은 데이터 범위가 일반 영상에 비해 넓고 밝기 레벨이 고르지 못하다. 특히 흉부 엑스레이 영상의 경우 다양한 이유로 촬영하기 때문에 갈비뼈와 혈관, 척추 뼈 등 특성이 다른 모든 부위들을 자연스럽게 개선할 필요가 있다. 이러한 엑스레이 영상의 경우 일반 영상과 특성이 다르기 때문에 기존의 화질 개선 알고리즘으로는 진단에 적합한 화질을 얻을 수 없다. 따라서 본 논문은 특정 밝기에 밀집된 정보들의 히스토그램 범위를 확장시키고, 주파수 대역 별 가중치 조절을 통한 선명도 개선 및 고주파 성분의 특성을 이용한 영상 융합 기법을 통해 최종적으로 영상의 대비를 적절하게 개선하는 흉부 엑스레이 영상용 화질 개선 방법을 제안한다. 또한 기존의 기법들과 비교하여 흉부 엑스레이 영상을 보다 자연스럽게 개선하는 것을 확인하고 discrete entropy와 saturation을 통해 정량적 평과 결과를 보인다.

• 한국화재소방학회논문지
• /
• 제29권6호
• /
• pp.76-83
• /
• 2015

EPS 샌드위치 패널은 난연제의 첨가로 화재 시 발화를 늦춰주며 발열을 적게 발생시켜 연소의 확대를 막는다. 하지만 난연성능 기준에 미달하는 샌드위치 패널을 사용할 경우, 재산 및 인명 피해가 확대되는 사례가 발생할 수 있다. 마감재료의 난연성능은 육안으로는 확인이 어려워 간편하면서도 빠른 평가방법의 개발이 요구된다. 본 연구에서는 X-선 분석법(XRF, XRD)을 이용하여 EPS 샌드위치 패널의 화재안전평가 방법에 대해 분석하였다. X-선 분석법을 적용한 결과 화재시험을 통한 난연 성능에 따라 특정 성분이 검출되는 것을 확인하였다. X-선 형광분석(XRF)을 통해 알루미늄성분이 부적합제품에 비해 적합제품에 훨씬 많이 함유되어있는 것을 알 수 있었다. X-선 회절분석(XRD)을 통해 난연 EPS의 주된 결정성 물질로 확인된 깁사이트(gibbsite)는 적합제품과 부적합제품에 공통으로 함유되어 있었지만 결정성에 있어 차이가 나는 것을 확인하였다. 이러한 X-선 분석을 통한 원소분석과 결정분석으로 난연성능 평가 가능성을 확인하였다.

• Journal of Radiation Protection and Research
• /
• 제41권2호
• /
• pp.93-99
• /
• 2016

Background: Industrial X-ray CT system is normally applied to non-destructive testing (NDT) for industrial product made from metal. Furthermore there are some special CT systems, which have an ability to inspect nuclear fuel assemblies or rocket motors, using high power and high energy (more than 6 MeV) pulsed X-ray source. In these case, pulsed X-ray are produced by the electron linear accelerator, and a huge number of photons with a wide energy spectrum are produced within a very short period. Consequently, it is difficult to measure the X-ray energy spectrum for such accelerator-based X-ray sources using simple spectrometry. Due to this difficulty, unexpected images and artifacts which lead to incorrect density information and dimensions of specimens cannot be avoided in CT images. For getting highly precise CT images, it is important to know the precise energy spectrum of emitted X-rays. Materials and Methods: In order to realize it we investigated a new approach utilizing the Bayesian estimation method combined with an attenuation curve measurement using step shaped attenuation material. This method was validated by precise measurement of energy spectrum from a 1 MeV electron accelerator. In this study, to extend the applicable X-ray energy range we tried to measure energy spectra of X-ray sources from 6 and 9 MeV linear accelerators by using the recently developed method. Results and Discussion: In this study, an attenuation curves are measured by using a step-shaped attenuation materials of aluminum and steel individually, and the each X-ray spectrum is reconstructed from the measured attenuation curve by the spectrum type Bayesian estimation method. Conclusion: The obtained result shows good agreement with simulated spectra, and the presently developed technique is adaptable for high energy X-ray source more than 6 MeV.

• Journal of Radiation Protection and Research
• /
• 제47권1호
• /
• pp.39-49
• /
• 2022

Background: For proper monitoring of the eye lens dose, an appropriate calibration factor of a dosimeter and information about the mean energies of X-rays are indispensable. The scattered X-ray energy spectra should be well characterized in medical practices where eye lenses of medical staffs might be high. Materials and Methods: Scattered X-ray energy spectra were experimentally derived for three different types of X-ray diagnostic and therapeutic equipment, i.e., the computed tomography (CT) scan, the angiography and the fluoroscopy. A commercially available CdZnTe (CZT) spectrometer with a lead collimator was employed for the measurement of scattered X-rays, which was performed in the usual manner. Results and Discussion: From the obtained energy spectra, the mean energies of the scattered X-rays lied between 40 and 60 keV. This also agreed with that obtained by the conventional half value layer method. Conclusion: The scattered X-rays to which medical workers may be exposed in the region around the eyes were characterized by means of spectrometry. The obtained mean energies of the scattered X-rays were found to match the flat region of the dosimeter response.

• 전자공학회논문지SC
• /
• 제44권6호
• /
• pp.42-48
• /
• 2007

X-ray 영상 시스템에서는, 크게 2 종류의 noise 성분이 함유되어있다. 먼저 x-ray 방사선이 조사되어질 때, 검출기에서의 방사선의 상호작용으로부터 발생되어지는 것으로서 랜덤하게 발생되어지는 Poisson noise 성분이다. 다음으로 noise 성분은 readout electronics noise, pixel pattern noise 그리고 off-set noise 등으로부터 발생되어지는 Gaussian noise 성분이다. 그러나, x-ray 영상에서는 Gaussian noise가 아닌, Poisson noise로 모델링 되어진다. Gaussian noise에 의해서 발생되어지는 noise 성분은 위너필터 혹은 웨이브렛을 사용하여 쉽게 제거가 가능하지만, Poisson noise와 같은 랜덤 noise를 제거하기 위해서는 복잡한 분석기법이 필요하게 한다. 이 논문에서는 웨이브렛 영역에서 x-ray 영상의 Poisson noise를 제거하고자 하였으며, 적용된 분석 기법은 최적화된 웨이브렛 분석기법인 IBS(Improved BayesShrink)을 사용하였다. 적용된 IBS 기법은 cone-beam CT의 x-ray 영상에서의 기존의 방법에 비해 향상된 결과를 보여주었다.

• Imaging Science in Dentistry
• /
• 제37권3호
• /
• pp.149-156
• /
• 2007

Purpose: The purpose of this study was to measure the absorbed dose and to calculate the effective dose for periapical radiography done by portable intraoral x-ray machines. Materials and Methods: 14 full mouth, upper posterior and lower posterior periapical radiographs were taken by wall-type 1 and portable type 3 intraoral x-ray machines. Thermoluminescent dosemeters were placed at 23 sites at the layers of the tissue-equivalent ART woman phantom for dosimetry. Average tissue absorbed dose and radiation weighted dose were calculated for each major anatomical site. Effective dose was calculated using 2005 ICRP tissue weighted factors. Results: On 14 full mouth periapical radiographs, the effective dose for wall-type x-ray machine was 30 Sv; for portable x-ray machines were 30 Sv, 22 Sv, 36 Sv. On upper posterior radiograph, the effective dose for wall-type x-ray machine was 4 Sv; for portable x-ray machines doses were 4 Sv, 3 Sv, 5 Sv. On lower posterior radiograph, the effective dose for wall type x-ray machine was 5 Sv; for portable x-ray machines doses were 4 Sv, 4 Sv, 5 Sv. Conclusion: Effective doses for periapical radiographs performed by portable intraoral x-ray machines were similar to doses for periapical radiographs taken by wall type intraoral x-ray machines.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.126-126
• /
• 2009

X-ray high-voltage generator is the most important part that can decide the radiation exposure dose affecting a patient or operator according to the characteristic. If decrease of X-ray radiation exposure dose and output characteristic of high-voltage generator is unstable, a patient or operator must be exposed to more radiation. This study measures and analyzes the exposure dose reproducibility and output characteristic according to a change of tube current on the various rectification methods of diagnostic X-ray equipment. It can find that quality bastardize and output is increased if voltage of X-ray tube is increased. Exposure dose reproducibility according to output of X-ray equipment is extremely excellent in inverter type, and is stable in order of following three-phase, a single-phase and condenser method. This study can find that the reply incidence of high-voltage generator is generated due to difference in rectification method, noise occurs in X-ray due to that, quality of an image is decreased due to that, and medical diagnosis can be failed due to that.