• Journal of the Korean Chemical Society
• /
• v.28 no.5
• /
• pp.293-301
• /
• 1984

-ray fluorescence analysis of $Ta_2O_5$, $Nb_2O_5$ and $ZrO_2$ in tin-slag samples using the simple dilution method was studied. The method is to correct mathematically the calibration curve to the linear line by the dilution. One synthesized standard having similar composition to the sample and tin slag samples were diluted with anhydrous $Li_2B_4O_7$ at the level of 1%, 2% and 3% of the sample content respectively. The diluted samples were fused at $1150^{\circ}C$ for 30 minutes and these glass beads were finely ground and pelletized. Measuring the X-ray intensities with these pellets, analytical results were calculated by the equation derived from J. Scherman's equation for the characteristic X-ray intensity of an element. Analytical results agreed with the reference values obtained by the standard calibration method within allowable error range and were reproducible.

• Journal of Applied Biological Chemistry
• /
• v.58 no.4
• /
• pp.345-348
• /
• 2015

Dried Rehmannia Radix Preparat, produced in different geographic origins of Korea and China, were investigated for the trace element contents using X-ray fluorescence spectrometry. When the estimated data for 35 kind of elements including K, P, S, Cl, Si, Al, Fe, Sn, etc on 143 samples were analyzed by canonical discrimination technique, the average classification correct rate was 92.3% and the significance was less than 0.0001. In case of reducing the number of elements for statistic analysis from 35 to 8 and to 3, the correct rates were also reduced to 88.1% and to 84.6%. The correct rate for Chinese samples ranged from 94.6-96.0%, while those for Korean ranged from 72.5-89.9%.

• Fire Science and Engineering
• /
• v.29 no.6
• /
• pp.76-83
• /
• 2015

EPS sandwich panel contains flame retardants that slow down ignition during fires,reduce the amount of heat generated, and block the spread of combustion. However, if a sandwich panel does not satisfy standards for fire-retardant performance, it may increase damage to property and human life. It is difficult to test the fire-retardant performance of a finishing material with the naked eye, so it is necessary to develop convenient and fast evaluation methods that are convenient and fast. In this study, a fire safety evaluation method for EPS sandwich panel was analyzed using X-ray to detect specific components related to the fire-retardant performance X-ray fluorescence analysis (XRF) indicated that suitable panel products contained more aluminum in comparison to unsuitable products. Gibbsite was identified as the main crystalline material of flame retardant EPS through X-ray diffraction analysis (XRD) and was included in both suitable products and unsuitable products, but there was a difference in crystalline structure. This study was verifies the possibility of evaluating fire-retardant performance using ultimate analysis and crystal analysis through these X-ray methods.

• Magazine of the Korea Concrete Institute
• /
• v.19 no.2
• /
• pp.55-60
• /
• 2007

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.10a
• /
• pp.54.1-54
• /
• 2000

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.10
• /
• pp.1770-1778
• /
• 2001

황토는 대표적인 천연 무기염재의 일종으로서 바람에 의해 운반되어 퇴적된 담황색 내지는 황회색을 띠는 실트질의 퇴적물을 일컫는다. 황토의 구성물질은 주로 석영, 장석, 산화철광물, 깁사이트 등의 여러 가지 점토광물을 포함하는데, 주로 적색을 띠는 것은 소량의 산화철 광물에 기인되는 경우가 많으며 황토를 구성하는 점토광물로는 버미큘라이트, 카오린 광물인 캐올리나이트와 할로이사이트, 일라이트 등이 있다. 본 연구에서는 면직물에 천연 무기염재인 황토를 사용한 염색시에 황토 단독염색과 콩즙 전처리 후 황토염색으로 나누어 염색을 실시하고, 원료 황토와 황토염색 후 면직물에 부착된 성분 간에 차이가 있는지를 확인하기 위해 X선 형광분석(X-ray fluorescence analysis, XRF)을 이용하여 염색 전.후 황토의 성분을 분석하였고, X선 회절분석(X-ray diffraction analysis, XRD)을 이용하여 황토 및 염색 전 후 면직물에 부착된 광물질의 주성분을 분석하였으며, energy dispersive spectrometer (EDS)가 장착된 주사전자현미경을 이용하여 면직물에 부착된 광물의 성분을 조사하였다. 그 결과, 황토로 면직물을 염색하는 경우 면직물에 부착되는 황토의 양과 K/S 값은 거 의 비례하여 증가하는 것으로 나타났다. 황토 염색 후 면직물에 부탁되는 주성분은 주로 SiO$_2$, A1$_2$O$_3$, Fe$_2$O$_3$등인 것으로 나타났으며, X선 회절분석과 EDS분석에 의해 캐올리나이트, 일라이트 등의 점토광물의 형태로 존재하는 것이 확인되었다.

• Korean Journal of Food Science and Technology
• /
• v.48 no.5
• /
• pp.418-423
• /
• 2016

This study was conducted to identify the geographical origin of soybeans in Cheonggukjang by analyzing its organic components and inorganic elements with Fourier transform near-infrared spectroscopy (FT-NIRS) and with energy dispersive X-ray fluorescence (ED-XRF) coupled with multivariate statistical analysis. For method development, 280 samples from various regions were collected and analyzed. The discriminant accuracy for the developed methods was 97.5% for FT-NIRS and 98.0% for ED-XRF with multivariate statistical analysis. A validation test confirmed the discriminant accuracy to be 96.3% for FT-NIRS and 95.0% for ED-XRF. Overall, the results showed that methods using FT-NIRS and ED-XRF could be used to identify the geographical origin of Cheonggukjang.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.75-80
• /
• 1999

In this study, clay sampled from Yangsan$.$Mulkum site were used to analyze mineral properties. Mineral and chemical properties of clay were investigated through X-ray fluorescence spectrometer(XRF), X-Ray Diffraction(XRD), and Scanning Electron Microscope(SEM) analysis. The result of this test represents that Yangsan$.$Mulkum clay are composed of quartz, albite, anorthite, orthocalse and illite.

• Journal of the Korean Chemical Society
• /
• v.26 no.5
• /
• pp.320-325
• /
• 1982

Utilyzing the solution prepared for the sulfur determination, the amounts of iron, copper and cobalt in the sulfide ore were determined by X-ray fluorescence spectrometry. The samples were dissolved with the mixed solutions of ,$Br_2\;and\;HNO_3$ and a major constituent of $SiO_2$was repelled from the solution by HF treatment several times. The analytical results agreed with the data obtained by conventional methods within ${\pm}$1.5% for Fe of the range of 20 to 50%, ${\pm}$1.0% for Cu of 10 to 15%, and ${\pm}$0.4% for Co of 1 to 5%. The present method was tolerably found to be reproducible.

• Analytical Science and Technology
• /
• v.9 no.4
• /
• pp.382-391
• /
• 1996

In this study, 12 different chemical species of fine ceramic($BaTiO_3$) were synthesized as the standard materials for the fast and accurate measurements of X-ray fluorescence spectrometry. Samples were diluted to sixteen times with the filling compound ($Li_2B_4O_7+LiBO_2$) in order to remove the matrix effect, and to get the convenient storage and homogeneity of ingredients. The matrix effects among the ingredients were corrected by the empirical coefficient method based on the Lucas-Tooth and Price model. The standard curve on 12 standard materials containing 15 elements were obtained by using X-ray fluorescence spectrometry at three different laboratories. The correlation factors of BaO, PbO, SrO, $Fe_2O_3$, $La_2O_3$, $SnO_2$, ZnO, $ZrO_2$, CaO indicated the relati vely good agreement over 0.995 among the three different laboratories. $SiO_2$ and $Al_2O_3$ showed the poor linearity because of their low fluorescence intensities.