• 제목/요약/키워드: X-ray Structure Analysis

검색결과 1,125건 처리시간 0.025초

Structural Characterization of the Intermetallic Phase EuZnxIn4-x (x ≈ 1.1-1.2). Zn and In Site-Preferences in the BaAl4 Structure-Type from Computational Analysis

  • You, Tae-Soo;Nam, Gnu;Kim, Youngjo;Darone, Gregory M.;Bobev, Svilen
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권6호
    • /
    • pp.1656-1662
    • /
    • 2013
  • The ternary phase $EuZn_xIn_{4-x}$ has been identified as the main product of reactions of Eu, Zn, and In by using the In-flux method and characterized by both powder and single-crystal X-ray diffraction. The structure belongs to the common $BaAl_4$-type (tetragonal space group I4/mmm, Pearson code tI10) with lattice parameters of a = 4.5610(9) ${\AA}$, c = 12.049(3) ${\AA}$ for composition $EuZn_{1.10(12)}In_{2.90}$ and a = 4.5463(3) ${\AA}$, c = 12.028(2) ${\AA}$ for composition $EuZn_{1.18(2)}In_{2.82}$, respectively. In this structure, the Eu atoms are situated at the center of 18-vertex Fedorov polyhedra made of Zn and In atoms, where the 4d site is preferentially occupied by In and the 4e site is occupied by randomly mixed Zn and In atoms. Theoretical investigations using tight-binding linear muffintin orbital (TB-LMTO) method provide rationale for the observed site preferences and suggest potentially wider homogeneity range than the experimentally established for $EuZn_xIn_{4-x}$ ($x{\approx}1.1$).

$H_2SO_4$-Intercalated Graphite Fiber의 Deintercalation에 관한 연구 (Study on the Deintercalation of $H_2SO_4$--Intercalated Graphite Fiber)

  • 김인기;최상흘;고영신
    • 한국세라믹학회지
    • /
    • 제30권10호
    • /
    • pp.797-802
    • /
    • 1993
  • Graphite fiber intercalated compound was deintercalated at $25^{\circ}C$, 65% of humidity and its deintercalated compound was discussed, based on the X-ray diffraction analysis, electrical resistivity measurement, and UV/VIS spectrometer measurements. During deintercalation, the structure was changed in orderlongrightarrowdisorderlongrightarroworder, and resistivity was decreased in the disorder state of the structure, which reflectance minimum of the UV/VIS spectrum ranged from 660 to 750nm (1.88~1.65eV).

  • PDF

알칼리수용액안에서 셀룰로오스섬유가 팽윤할 때 장력이 미치는 영향 (Effect of Stretching on Cellulose Fiber Swelling in Alkali Aqueous Solutions)

  • 최철호
    • 한국염색가공학회지
    • /
    • 제4권3호
    • /
    • pp.91-96
    • /
    • 1992
  • The crystalline character of NaOH and KOH-cellulose complex having different tension ratio was studied using X-ray diffraction analysis. Cellulose crystalline lattices in tension alkali treatment cotton were identified by measuring and indexing the 101, 101, and 002 reflections. According as alkali treatment tension ratio increased on, cellulose gave rise to the formation of I rather than cellulose II. It seemed that a part of the fine structure of cellulose increased orientation with antiparaell and parallel chain crystal structure. The high tension ratio alkali treatment cotton resulted in lower dye sorption and in higher breaking strength and crease recovery.

  • PDF

Synthesis and Properties of Dicyclohexyltin(IV) Complexes. Structure of $Cy_2Sn(S_2CNMe_2)_2 $

  • Jung, Ok-Sang;Kim, Min-Jung;Jeong, Jong-Hwa;Sohn, Youn-Soo
    • Bulletin of the Korean Chemical Society
    • /
    • 제10권4호
    • /
    • pp.343-346
    • /
    • 1989
  • Dicyclohexyltin(IV) complexes $Cy_2SnX (X = O,\;S,\;(Me_2NCS_2)_2)$ have been prepared and characterized by means of elemental analysis, cryoscopic data, and IR spectroscopy. X-ray structure determination for $Cy_2Sn(S_2CNMe_2)_2$ (monoclinic; P2/c;a = 8.992(1), b = 6.688(1), c = 19.453(2) ${\AA},\;{\beta}$ = 96.556(7) ; R = 0.041) has shown that the molecule is $C_2$-symmetric with both dithiocarbamate ligands bonding in anisobidentate mode and the local geometry around the hexacoordinate Sn(IV) atom is a distorted octahedral arrangement with the two cyclohexyl groups in trans position. The physical and chemical properties measured suggest polymeric and trimeric structures for $Cy_2SnO\;and\;Cy_2SnS$, respectively.

진단방사선과(診斷放射線科)의 적정인력(適正人力) 관리(管理)에 관(關)한 연구(硏究) -서울시내 종합병원(綜合病院) 중심(中心)으로- (A Study on the Reasonable Personnel Management of Radiology Department -Centering around the General Hospitals in Seoul-)

  • 정순규
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제11권2호
    • /
    • pp.27-64
    • /
    • 1988
  • Most hospital administrators in our country have doubted whether or not the size of their hospital personnel staffs, and the personnel management styles implemented are efficient or not. Actually, increased personnel expenditures due to sophisticated specialization of medical practices has become the biggest hospital expense. Therefore, it is said that hospitals can be run move efficiently by implementing reasonable management strategies for hospital personnel management. In this paper, the departments of diagnostic radiography in 16 general hospitals in Seoul, which were classified into 4 groups by the scale of hospital beds, were used as sample cases. Then, the data for the number of X-ray examination by diagnostic item was collected from sample hospitals. The unit hour spent on X-ray examinations in each diagnostic service was quoted from "A Study on setting-up of the relative value units of medical services and on the structure of current fee schedules" written by Mr. Ik Je Seong. The data analysis results are as follows; First, the number of hours per day spent on X-ray examinations in 13 hospitals out of 16 hospitals, was shorter than the general daily working hours (8 hours). Second, in the morning there was not enough time to work for X-ray examinations required, with the available manpower. In the afternoon, however, the situation was diametrically opposed to that in the morning. Third, in light of above results, though most hospitals employ sufficient personnel for the quantity of the actural work, they were always short-handed where their works were performed Fourth, this study tells us that there is a maldistribution of the work in the schedule : too much work for the available personnel in the morning. The following recommendations are resulted from the data analysis described above. First, it is recommended that all out-patients coming again, except specific patients(G. B. or I.V.P. etc) who have to have their X-ray examinations on an empty stomach in the morning among out-patients, be required to visit the hospital in the afternoon. Second, it is recommended that all new out-patients be required to make a reservation in order to equalize the number of patients throughout the day. Third, it is recommended that all in-patients, except specified patients, be arranged to have their X-ray examinations in the afternoon. Fourth, it is recommended that part time workers be employed during peak hours. This recommendation, if applied in a wider scale, would allow hospitals to overcome the problem of the maldistribution of work and personnel, and then more efficient hospital management through the appropirate personnel management procedures could be expected.

  • PDF

A New Superconductor with the 1212 Structure $(Pb,Sn)Sr_2(Ca,Lu)Cu_2O_z$

  • Lee, Ho-Keun;Jee, Chan-Soo
    • Progress in Superconductivity
    • /
    • 제2권1호
    • /
    • pp.6-10
    • /
    • 2000
  • New cuprates with the nominal composition $(Pb_{0.75}Sn_{0.25})Sr_2(Ca_{1-x}Lu_x)Cu_2O_z(x=0.4{\sim}1.0)$ have been synthesized. These materials exhibit superconducting properties for 0.4 $\leq$ x $\leq$ 0.7. It is also observed that the superconductivity of the as-prepared sample is enhanced by post-annealing at high temperature followed by quenching. X-ray diffraction analysis reveals that the c lattice parameter decreases as x increases whereas the a lattice parameter is nearly independent of the value of x for both the as-prepared and the post-treated samples. The thermoelectric power measurements indicate that the post-heat-treatments result in an increase in the hole carrier density which account for the observed increase of $T_c$. Bulk superconductivity with a $T_c$ value of 60 K is observed in this system.

  • PDF

$(Ba_{1-x}Pb_x)TiO_3$ 세라믹의 구조와 전기적 특성 (Structure and Electric Properties of $(Ba_{1-x}Pb_x)TiO_3$ Ceramics)

  • 김시중;김건;박휴범;안병준
    • 한국세라믹학회지
    • /
    • 제29권4호
    • /
    • pp.259-264
    • /
    • 1992
  • The crystal structures and the bonding characteristics in $(Ba_xPb_{1-x})TiO_3$ have been investigated by X-ray diffraction analysis and infrared spectrophotometry. As $Ba^{2+}$ ion in $BaTiO_3$ were substituted by $Pb^{2+}$ ion, the structures were changed to orthorhombic from tetragonal, and also the covalent character in Ti-O bond increased, and then the dielectric constants decreased gradually. In the mixed oxide containing $Pb^{2+}$ ion more than 50%, the change-transfer energy of titanium ion increased.

  • PDF

Electrochemical Properties of (Li0.5-xNaxLa0.5)Ti0.8Zr0.2O3 Ceramics as Improved Electrolyte Materials for Li-ion Batteries

  • Lee, Seung-Hwan;Kim, Hong-Ki;Yun, Ye-Sol;Jeong, Tae-Hoon;Nam, Sung-Pill;Kim, Young-Sung;Kim, Jae-Chul;Lee, Ku-Tak;Im, In-Ho
    • Transactions on Electrical and Electronic Materials
    • /
    • 제15권2호
    • /
    • pp.96-99
    • /
    • 2014
  • We fabricated $(Li_{0.5-x}Na_xLa_{0.5})Ti_{0.8}Zr_{0.2}O_3$(LNTLZ)ceramics ($0{\leq}x{\leq}0.4$) with a perovskite structure via standard solid state synthesis. The influence of Na content on the structural and electrical properties of LNTLZ ceramics was also investigated. During XRD patterns analysis, all of the samples showed orthorhombic structure. The resistance of LNTLZ ceramics decreased as Na content increased, and the maximum activation energy shows 0.56 eV at x=0.4 at room temperature. These results indicated that LNTLZ ceramics are a candidate for use Lithium ion batteries as electrolytes.

RF마그네트론 스퍼터링법으로 제조한 $YBa_2Cu_3O_{7-x}$전도체 박막의 특성에 대한 기판의 영향 (Substrate effects on the characteristics of $YBa_2Cu_3O_{7-x}$ thin films prepared by RF magnetron sputtering)

  • 신현용;박창엽
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제8권1호
    • /
    • pp.6-12
    • /
    • 1995
  • High Tc superconducting YBa$_{2}$Cu$_{3}$$O_{7-x}$ thin films were prepared on various substrates by off-axis rf magnetron sputtering method to examine the substrate effects on the film structure and its R-T characteristics. The SEM analysis showed that the surface morphology of the grown YBa$_{2}$Cu$_{3}$O.sub 7-x/, film has different characteristic structure with different substrate used. The film on (100) SrTiO$_{3}$ substrate has critical current density of 3*10$^{5}$ A/cm$^{2}$ at 77K under zero magnetic field. The X-ray diffraction measurements revealed that the films on (100) SrTiO$_{3}$ substrate have mixed a-axis and c-axis normal to the substrate surface and the films on (100) MgO and ZrO$_{2}$/sapphire substrates have c-axis normal orientation to the substrate surface. However, YBa$_{2}$Cu$_{3}$$O_{7-x}$ films on (100) sapphire substrates showed no preferential orientation.ion.

  • PDF

A Facile Approach to Fabrication of Hollow ZnO Nanoparticles

  • Cho, Gwang-Rae;Kim, Dong-Hyeon;Lee, Dong-Hoon
    • Composites Research
    • /
    • 제31권3호
    • /
    • pp.94-98
    • /
    • 2018
  • Well-defined, monodispersed hollow ZnO nanoparticles were successfully synthesized by a facile one-pot solution method at room temperature. Hollow ZnO nanoparticles were fabricated using polystyrene nanoparticles as seed particles. The removal of core particles via solvent extraction yields hollow nanoparticles. The structures and morphologies of the obtained products were characterized with Fourier transform infrared (FT-IR), Thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), X-ray diffraction pattern (XRD) and Scanning electron microscopy (SEM). The formation mechanism of the hollow structure of the ZnO nanoparticles was also investigated. The technique developed here is expected to be useful in the preparation other metal oxides and hollow architectures.