• Bulletin of the Korean Chemical Society
• /
• v.22 no.12
• /
• pp.1350-1360
• /
• 2001

The synthesis and characterization of very stable Pd(Ⅱ) η1-imine complexes of bis(3,4-dialkyloxybenzylidene-3', 4'-dialkyloxyaniline)dichloropalladium(Ⅱ) with alkyl chain of hexyl (8), octyl (9), decyl (10) and dodecyl (11) groups, a nd of bis(4-ethyloxybenzylidene-4'-ethyloxyaniline)dichloropalladium(Ⅱ) as a model complex are described. The molecular structure with twisted board-like geometry of the complex resulting from the coordination of Pd(Ⅱ) with η1-imine bonding was confirmed by X-ray crystallographic analysis of the model complex. In contrast to the imine ligands, all the complexes with an exception of 11 display a thermally stable monotropic smectic A mesophase without any decomposition of the complex. These results, characterized by a combination of differential scanning calorimetry, optical polarized microscopy, and powder X-ray scattering experiments, are discussed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.170-171
• /
• 2019

When the cement paste in concrete is exposed to high temperatures, the mechanical performance decreases due to a series of reactions inside the cement. In this study, we investigated the change of nanostructure of $C_3S$ when $C_3S$ was exposed to high temperature using pair distribution function (PDF) based on high energy X-ray scattering. As a result of X-ray diffraction, there was no significant difference when $C_3S$ was heated at $300^{\circ}C$, but most of $Ca(OH)_2$ was decomposed into CaO at $500^{\circ}C$. In addition, it was confirmed that CaO is dominant in the nanostructure when $C_3S$ is heated to $500^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.34 no.8
• /
• pp.897-907
• /
• 1997

Thin films of Bi4-xSmxTi3O12(0$\leq$x$\leq$2) were prepared on Pt/Ti/SiO2/Si(100) at $700^{\circ}C$ using spin-coating with sols derived from Bi-Sm-Ti complex alkoxides. From X-ray diffraction analysis, it was observed that Sm-substituted phases resembled ferroelectric Bi4Ti3O12 in structure. Variations of their lattice parameters depending on the amount of Sm-substitution showed that an anomalous structural distortion might exist at x=1. The grain sizes of the thin films decreased from 0.115 ${\mu}{\textrm}{m}$ to 0.078${\mu}{\textrm}{m}$ with increasing the amount of Sm-substitution. The dielectric constants and the remanent polarizations of the thin films decreased with increasing the amount of the Sm-substitution, which were related to decrease of the stereo-active Bi3+ ion contributing to polarization. However, these values were exceptionally high at x=1, compared to those of the other substituted phases. Such an anomaly suggests that the phase of x=1 has 1:1 chemical ordering between Sm and Bi in structure. The thin films of all compositions except x=2 showed ferroelectricity. The thin film of x=2 was paraelectric, whose grains were too fine to exhibit ferroelectricity.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.1
• /
• pp.27-34
• /
• 2013

X-ray powder diffraction is one of the most powerful techniques for qualitative and quantitative analysis of crystalline compounds. Thus, there exist a number of different methods for quantifying mineral mixtures using X-ray diffraction pattern. We present here the use of Rietveld and PONKCS (partial or no known crystal structure) methods for quantification of amorphous and crystallized mineral phases in synthetic mixtures of standard minerals (amorphous silica, quartz, mullite and corundum). Pawley phase model of amorphous silica was successfully built from the pattern of 100 wt% amorphous silica and internal standard-spiked samples by PONKCS approach. The average of absolute bias for quantities of amorphous silica was 1.85 wt%. The larger bias observed for lower quantities of amorphous silica is probably explained by low intensities of diffraction pattern. Averages of absolute bias for minerals were 0.53 wt% for quartz, 0.87 wt% for mullite and 0.57 wt% for corundum, respectively. The PONKCS approach achieved improved quantitative results compared with classical Rietveld method by using an internal standard.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.3
• /
• pp.45-52
• /
• 2007

The anatomical characteristics of Quercus variabilis woods carbonized at 310 to $350^{\circ}C$ were examined with an optical and scanning electron microscopy, and an X-ray diffraction analysis. Dimensional change and weight loss were also investigated. Volume of wood samples decreased with increasing the carbonization temperature, and checks were developed along with radial direction. Vessel diameter in tangential direction showed higher shrinkage than that in radial direction. Weight loss of samples increased with increasing carbonization temperature. Especially, the weight loss rapidly increased at the temperature ranging from 330 to $340^{\circ}C$. SEM study presented that the cell walls of samples carbonized at below $320^{\circ}C$ showed the layering structure. However, it was revealed that the layering structure was disappeared at $330^{\circ}C$ and over and showed an amorphous-like structure without cell wall layering. Interestingly, the existence of cellulose crystalline substance at $340^{\circ}C$ was confirmed by X-ray diffraction analysis and it was not detected at $350^{\circ}C$. Consequently, it is considered that the critical temperature for carbonization of wood was around $350^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.53 no.5
• /
• pp.568-573
• /
• 2016

We explore the crystalline structure and phase transition of lithium thiophosphate ($Li_7P_3S_{11}$) solid electrolyte using electron microscopy and X-ray diffraction. The glass-like $Li_7P_3S_{11}$ powder is prepared by the high-energy mechanical milling process. According to the energy dispersive X-ray spectroscopy (EDS) and selected area diffraction (SAD) analysis, the glass powder shows chemical homogeneity without noticeable contrast variation at any specific spot in the specimen and amorphous SAD ring patterns. Upon heating up to $260^{\circ}C$ the glass $Li_7P_3S_{11}$ powder becomes crystallized, clearly representing crystal plane diffraction contrast in the high-resolution transmission electron microscopy image. We further confirm that each diffraction spot precisely corresponds to the diffraction from a particular $Li_7P_3S_{11}$ crystallographic structure, which is also in good agreement with the previous X-ray diffraction results. We expect that the microscopic analysis with EDS and SAD patterns would permit a new approach to study in the atomic scale of other lithium ion conducting sulfides.

• Journal of Sericultural and Entomological Science
• /
• v.39 no.1
• /
• pp.73-78
• /
• 1997

The crystalline fraction of silk fibroin (Fcp) was obtained from the aqueous solution of silk fibroin hydrolyzed by $\alpha$-chymotrypsin. The molecular weight of Fcp was found approximately 7000 by using high speed GPC. On the other hand, a high molecular weight of PIFcp product could be obtained by the reverse reaction of enzymatic proteolysis of Fcp precipitates. Some parts of this PIFcp have the molecular weights of approximately 17000 and 24000. As a result of x-ray diffraction analysis, the crystal structure of Fcp and PIFcp was turned out silk-II type and silk-I type, respectively. Upon the reverse reaction of enzymatic protelysis, the structural transition occured from silk-II type to silk-I type crystal for the most of Fcp precipitates. It was confirmed that PIFcp might be somewhat stable crystal structure of silk-I type according to the thermal analysis as well as x-ray diffraction method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.877-881
• /
• 2005

In this paper, a novel method for analyzing a textile fabric structure is proposed to segment each yarn of the textile fabric from voxel data made out of its X-ray computed tomography (CT) images. In order to segment the each yarn, directions of fibers, of which yarn consists, are firstly estimated by correlating the voxel with a fiber model. Second, each fiber is reconstructed by clustering the voxel of the fiber using the estimated fiber direction as a similarity. Then, each yarn is reconstructed by clustering the reconstructed fibers using a distance which is newly defined as a dissimilarity. Consequently, each yarn of the textile fabric is segmented from the voxel data. The effectiveness of the proposed method is confirmed by experimentally applying the method to voxel data of a sample plain woven fabric, which is made of polyester two folded yarn. The each two folded yarn is correctly segmented by the proposed method.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.1021-1025
• /
• 2009

A novel supramolecular network containing binuclear copper unit $[Cu(phen)_{2}({\mu}-ID\;A)Cu(phen){\cdot}(NO_{3})](NO_{3}){\cdot}4(H_{2}O)$ (1) was synthesized through the self-assembly of iminodiacetic acid ($H_2IDA$) and 1,10-phenanthroline (phen) in the condition of pH = 6. It has been characterized by the infrared (IR) spectroscopy, elemental analysis, single crystal X-ray diffraction, and thermogravimetric analysis (TGA). 1 shows a 2-D supramolecular structure assembled through strong and unique $\pi-\pi$ packing interactions. Density functional theory (DFT) calculations show that theoretical optimized structures can well reproduce the experimental structure. The TGA and powder X-ray diffraction (PXRD) curves indicate that the complex 1 can maintain the structural integrity even at the loss of free water molecules. The magnetic property is also reported in this paper.

• Biodesign
• /
• v.6 no.4
• /
• pp.100-102
• /
• 2018

Autophagy is a degradation pathway that targets many cellular components and plays a particularly important role in protein degradation and recycling. This process is very complex and several proteins participate in this process. One of them, P62/SQSTM1, is related to the N-end rule and induces protein degradation through autophagy. The P62/SQSTM1 makes a huge oligomer, and this oligomerization is known to play an important role in its mechanism. This oligomerization takes two steps. First, the PB1 domain of P62/SQSTM1 makes the base oligomer, and then, when the ligand binds to the ZZ domain of P62/SQSTM1, it induces a higher oligomer by the disulfide bond of the two cysteines. To understand the oligomerization mechanism of P62/SQSTM1, we need to know the dimerization of the PB1 domain. In this study, crystals of PB1 dimer were made and the crystals were diffracted by X-ray to collect usable data up to 3.2A. We are analyzing the structure using the molecular replacement (MR) method.