• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.309-309
• /
• 2011

There have been large research activities on the high quality oxide films for the realization oxide based electronics. However, the interface interdiffusion prohibits achieving high quality oxide films, when the oxide films are grown on non-oxide substrates. In the case of Si substrates, there exist lattice mismatch and interface interdiffusion when oxide films deposited on direct Si surface. In this presentation, we report the interface characteristics of yttria-stabilized zirconia films grown on silicon substrates. From x-ray reflectivity analysis we found that the film thickness and interface roughness decreased as the growth temperature increased, indicating that the growth mechanism varies and the chemical reaction is limited to the interface as the growth condition varies. Furthermore, the packing density of the film increased as the growth temperature increased and the film thickness decreased. X-ray photoelectron spectroscopy analysis of very thin films revealed that the amount of chemical shift increased as the growth temperature increased. Intriguingly, the direction of the chemical shift of Zr was opposite to that of Si due to the second nearest neighbor interaction.

• Transactions on Electrical and Electronic Materials
• /
• 제16권6호
• /
• pp.346-350
• /
• 2015

In this study, we carried out an investigation of the etch characteristics of TiO₂ thin films and the selectivity of TiO₂ to SiO₂ in adaptive coupled C1₂/Ar plasma. The maximum etch rate of the TiO₂ thin film was 136±5 nm/min at a gas mixing ratio of C1₂/Ar (75%:25%). The X-ray photoelectron spectroscopy (XPS) analysis showed the efficient destruction of oxide bonds by the ion bombardment as well as the accumulation of low volatile reaction products on the etched surface.

• Transactions on Electrical and Electronic Materials
• /
• 제11권6호
• /
• pp.285-287
• /
• 2010

This paper introduces homogeneous liquid crystal (LC) orientations on chemically modulated polystyrene (PS) surfaces using various ion beam (IB) exposure times. Transparent PS was replaced with conventional polyimide material. As a non-contact process, the IB bombardment process induced LC orientation parallel to the IB process. Through x-ray photoelectron spectroscopy, it was shown that the chemical compositional changes of the IB-irradiated PS surfaces were determined as a function of IB exposure time. Using this analysis, the optimal IB bombardment condition was determined at an IB exposure time of up to 15 seconds. Moreover, thermal stability on IB-irradiated PS surfaces were carried out which showed that a relatively high IB exposure time induced a thermally stable LC alignment property.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Pre-symposium of the 10th ISWPC Recent Advances in Paper Science and Technology
• /
• pp.276-281
• /
• 1999

The surfaces of sheets added with N-chloro-polyacrylamide (N-Cl-PAM) are analyzed using X-ray photoelectron spectroscopy (XPS) to clarify the chemical bonding involved in the paper strength development induced by N-Cl-PAM. The comparison of the observed N1s chemical shift of the sheet with those of the paper strength additives and the model compound, 1-butyryl-3-propyl urea, illustrated the presence of covalent bonds of alkyl acyl urea and urethane on the fiber surfaces. Thus the formation of the covalent bonds by N-Cl-PAM themselves and by N-Cl-PAM with cellulose and hemicellulose may be an explanation for much higher effectiveness of N-Cl-PAM on the improvement of wet strength of paper than A-PAM.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.72-72
• /
• 2011

Surface science is intrinsically related to the performance of solar cells. In solar cells the generation and collection of charge carriers determines their efficiency. Effective transport of charge carriers across interfaces and minimization of their recombination at surfaces and interfaces is of utmost importance. Thus, the chemistry at the surfaces and interfaces of these devices must be determined, and related to their performance. In this talk we will discuss the role of two important interfaces, First, the role of surface passivation is very important in limiting the rate of carrier of recombination. Here we will combine x-ray photoelectron spectroscopy of the surface of a Si device with electrical measurements to ascertain what factors determine the quality of a solar cell passivation. In addition, the quality of the heterojunction interface in a ZnSe/CdTe solar cell affects the output voltage of this device. X-ray photoelectron spectroscopy gives some insight into the composition of the interface, while ultraviolet photoemission yields the relative energy of the two materials' valence bands at the junction, which controls the open circuit voltage of the solar cell. The relative energies of ZnSe and CdTe at the interface is directly affected by the material quality of the interface through processing.

• 한국전기전자재료학회논문지
• /
• 제13권3호
• /
• pp.188-192
• /
• 2000

In this study PZT etching was performed using planar inductively coupled Ar/Cl$_2$/BCI$_3$ plasma. The etch rate of PZT film was 2450 $\AA$/min at Ar(20)/BCl$_3$(80) gas mixing ratio and substrate temperature of 8$0^{\circ}C$. X-ray photoelectron spectroscopy(XPS) analysis for films composition of etched PZT surface was utilized. The chemical bond of PbO is broken by ion bombardment and Cl radical, and the peak of metal Pb in a Pb 4f narrow scan begins to appear upon etching. As increasing additive BCl$_3$content the relative content of oxygen decreases rapidly in contrast with etch rate of PZT thin film. So we though that the etch rate of PZT thin film increased because abundant B and BCl radicals made volatile oxy-compound such as B$_{x}$/O$_{y}$ and/or BClO$_{x}$ bond. We achieved etch profile of about 80$^{\circ}$ at Ar(20)/BCl$_3$(80) gas mixing condition and substrate temperature of 8$0^{\circ}C$TEX>X>.

• 한국진공학회지
• /
• 제2권2호
• /
• pp.171-180
• /
• 1993

X-선 광전자 분광법(XPD)을 이용하여 GaAs(110) 절개면의 결정구조를 이해하였다. 각분해 X-선 분광법으로 GaAs(110) 면의 내각준위 Ga 및 As 3d의 스펙트럼을 얻어, 이 내각 준위의 세기 비율(intensity ratio)의 방위각과 편각에 따른 변화를 SSC(Single Scattering Cluster) 모델에서 얻은 회절패턴으로 곡선분석(fitting)하여 절개면의 재구성 구조(reconstruction geometry)를 얻었다. 이 절개면의 재구성된 값은 다른 실험의 결과와 비슷하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.87-88
• /
• 2012

Metal oxide nanostructures have been applied to various fields such as energy, catalysts and electronics. We have freely designed one and two-dimensional (1 and 2-D) metal (transition metals and lanthanides) oxide nanostructures, characterized them using various techniques including scanning electron microscopy, transmission electron microscopy, X-ray diffraction crystallography, thermogravimetric analysis, FT-IR, UV-visible-NIR absorption, Raman, photoluminescence, X-ray photoelectron spectroscopy, and temperature-programmed thermal desorption (reaction) mass spectrometry. In addition, Ag- and Au-doped metal oxides will be discussed in this talk.

• Carbon letters
• /
• 제13권1호
• /
• pp.44-47
• /
• 2012

We analyzed the effect of etchants for metal catalysts in terms of the characteristics of resulting graphene films, such as sheet resistance, hall mobility, transmittance, and carrier concentration. We found the residue of $FeCl_3$ etchant degraded the sheet resistance and mobility of graphene films. The residue was identified as an iron oxide containing a small amount of Cl through elemental analysis using X-ray photoelectron spectroscopy. To remove this residue, we provide an alternative etching solution by introducing acidic etching solutions and their combinations ($HNO_3$, HCl, $FeCl_3$ + HCl, and $FeCl_3+HNO_3$). The combination of $FeCl_3$ and acidic solutions (HCl and $HNO_3$) resulted in more enhanced electrical properties than pure etchants, which is attributed to the elimination of left over etching residue, and a small amount of amorphous carbon debris after the etching process.

• 대한금속재료학회지
• /
• 제50권8호
• /
• pp.549-556
• /
• 2012

The tribological behavior of CrMoN films with respect to surface chemistry was investigated by using X-ray photoelectron spectroscopy (XPS). All of the films were prepared from a hybrid PVD system consisting of DC unbalanced magnetron (UBM) sputtering and arc ion plating (AIP) sources. The tribological property of the films was evaluated by a friction coefficient using a Ball-on-disk type tribometer. The chemistry of wear track was analyzed by energy dispersive spectroscopy (EDS) and XPS. The friction coefficient was measured to be 0.4 for the CrMoN film, which is lower than that of a monolithic CrN film. EDS and XPS results imply the formation of an oxide layer on the coating surface, which was identified as molybdenum oxide phases, known to be a solid lubricant during the wear test.