• Tuberculosis and Respiratory Diseases
• /
• v.44 no.2
• /
• pp.329-337
• /
• 1997

Background : Since endotracheal tube is the most important factor involved in the imposed work of breathing during mechanical ventilation, extubation of endotracheal tube is supposed to reduce respiratory work of patient. However, some patients show labored breathing after extubation despite acceptable blood gases. We investigated the changes of work of breathing before and after extubation and the factors involved in the change of WOB after extubation. Methods : The subjects were 34 patients(M : F = 20 : 14, mean age = $61{\pm}17yre$) who recovered from respiratory failure after ventilatory support and were considered to be ready for extubation. The patients with clinical or radiologic evidences of upper airway obstruction before endotracheal intubation for mechanical ventilation were excluded. Vital sign, physical examination, chest X-ray, work of breathing and other respiratory mechanic indices were measured prior to, immediately, 6, 24 and 48 hours after extubation serially. Definition of weaning failure after extubation was resumption of ventilatory support or reintubation of endotracheal tube within 48 hour after extubation because of respiratory failure. The patients were classified into group 1(decreased work of breathing), group 2(unchanged work of breathing) and group 3(increased work of breathing) depending on the statistical difference in the change of work of breathing before and after extubation. Results : Work of breathing decreased in 33%(11/34, group 1), unchanged in 41%(14/34, group 2) and increased in 26%(9/34, group 3) of patients after extubation compared with before extubation. Weaning failure occurred 9%(1/11) of group, 1, 28.6%(4/14) of group 2 and 44%(4/9) of group 3 after extubation(p = 0.07). The change of work of breathing after extubation was positively correlated with change of mean airway resistance(mRaw). (r = 0.794, p > 0.01). In three cases of group 3 whose respiratory indices could be measured until 48 hr after extubation, the change in work of breathing paralleled with the sequential change of mRaw. The work of breathing was peaked at 6 hr after extubation, which showed a tendency to decrease thereafter. Conclusions : Reversible increase of work of breathing after extubation may occur in the patients who underwent extubation, and the increase in mRaw could be responsible for the increase in work of breathing. In addition, the risk of weaning failure after extubation may increase in the patients who have increased WOB immediately after extubation.

• Tuberculosis and Respiratory Diseases
• /
• v.72 no.1
• /
• pp.8-14
• /
• 2012

Background: Although airway obstruction in chronic obstructive pulmonary disease (COPD) is due to pathologic processes in both the airways and the lung parenchyma, the contribution of these processes, as well as other factors, have not yet been evaluated quantitatively. We therefore quantitatively evaluated the factors contributing to airflow limitation in patients with COPD. Methods: The 213 COPD patients were aged >45 years, had smoked >10 pack-years of cigarettes, and had a post-bronchodilator forced expiratory volume in one second ($FEV_1$)/forced vital capacity (FVC) <0.7. All patients were evaluated by medical interviews, physical examination, spirometry, bronchodilator reversibility tests, lung volume, and 6-minute walk tests. In addition, volumetric computed tomography (CT) was performed to evaluate airway wall thickness, emphysema severity, and mean lung density ratio at full expiration and inspiration. Multiple linear regression analysis was performed to identify the variables independently associated with $FEV_1$ - the index of the severity of airflow limitation. Results: Multiple linear regression analysis showed that CT measurements of mean lung density ratio (standardized coefficient ${\beta}$=-0.46; p<0.001), emphysema severity (volume fraction of the lung less than -950 HU at full inspiration; ${\beta}$=-0.24; p<0.001), and airway wall thickness (mean wall area %; ${\beta}$=-0.19, p=0.001), as well as current smoking status (${\beta}$=-0.14; p=0.009) were independent contributors to $FEV_1$. Conclusion: Mean lung density ratio, emphysema severity, and airway wall thickness evaluated by volumetric CT and smoking status could independently contribute to the severity of airflow limitation in patients with COPD.

• Tuberculosis and Respiratory Diseases
• /
• v.63 no.2
• /
• pp.139-144
• /
• 2007

Background: Bronchial anthracofibrosis, which is defined as bronchial narrowing with black pigmentation of the overlying bronchial mucosa, is frequently associated with tuberculosis. The aim of this study was to examine the relationship between bronchial anthrocofibrosis and to identify the clinical and radiological characteristics of non-tuberculous bronchial anthracofibrosis. Methods: All patients who showed bronchial anthracofibrosis in more than one segment on a bronchoscopic examination from January 2003 to July 2006 at Kangnam St. Mary's hospital were enrolled in this study. The underlying diseases, baseline clinical characteristics, characteristic findings on a computed tomogram (CT) of the chest, pathologic findings of the bronchial mucosa, and the clinical response to steroid therapy were analyzed retrospectively. Results: A total 54 patients (19 males, 35 females) were enrolled with a mean age of 75 years. The most common presenting symptoms were cough, sputum and dyspnea. The predominant X-ray findings were peribronchial soft tissue attenuation with or without calcification, mediastinal lymphadenopathy with or without calcification and atelectasis. Fourteen non-tuberculous anthracofibrosis patients were treated with steroid. Nine patients were improved clinically, and 6 patients were improved radiologically. Conclusion: Bronchial anthracofibrosis is frequently associated with various pulmonary diseases not only tuberculosis but also COPD pneumonia etc.

• Tuberculosis and Respiratory Diseases
• /
• v.49 no.6
• /
• pp.774-779
• /
• 2000

Pseudomembranous colitis, although uncommon, is an important complication of antibiotics that is related to a variety of deleterious effects on the gastrointestinal tract. Rifampicin is one of the 1st line agents in the treatment of tuberculosis and a large number of patients are exposed to its potential adverse effects. We report upon a patient that had diarrhea due to pseudomembranous colitis after receiving antitubeculous medication, and which was probably caused by rifampicin. A 77-year-old man was admitted with diarrhea of three weeks duration. One month previously, he suffered from left pleuritic chest pain and left pleural effusion was noticed at chest X-ray. One week prior to the onset of diarrhea, he was started on empirically isoniazid, rifampicin, ethambutol and pyrazynamide as antituberculous medication. On admission, he complained of diarrhea, left pleuritic chest pain, dyspnea and sputum. On physical examination, breathing sound was decreased in the left lower lung field and bowel sound increased. Pleural biopsy revealed chronic granulomatous inflammation, which was compatible with tuberculosis, Sigmoidoscopy showed whitish to yellowish pseudomembrane with intervening normal mucosa, and his stool was positive for C.difficle toxin. He was diagnosed as pseudomembranous colitis and treated with oral metronidazole and vancomycin. The diarrhea did not recur after reinstitution of the anti-tuberculous medication without rifampicin inpatients with severe diarrhea receiving anti-tuberculous medication, rifampicin induced pseudomembranous colitis should be excluded.

• Tuberculosis and Respiratory Diseases
• /
• v.38 no.2
• /
• pp.155-163
• /
• 1991

Bronchoalveolar lavage had been done as the treatment of some diseases such as alveolar proteinsois, bronchiectasis, and severe asthma to remove excessive secretion or mucus. But in the recent decade it has been done as a diagnostic method and a tool to understand and evaluate the pathophysiology of diffuse interstitial lung diseases such as sarcoidosis, pneumoconiosis and hypersensitivity pneumonitis. To analyse the bronchoalveolar fluid, it might be useful to have a standard reference (especially cell counts and differetial count of the cells from bronchoalveolar lavage fluid) of normal person. But it is difficult to study the normal volunteers. We investgated the bronchoalveolar lavage fluid of 48 patients (28 nonsmokers, 20 smokers) who visited Severance Hospital because of minor pulmonary symptoms such as cough and sputum. They did neither complain of dyspnea nor cyanosis, and had normal or unilateral minor lesion on physical examination and chest X-ray. We analysed the recovery rate, viability, total cell count and differential count of the cells in fluid obtained by bronchoalveolar lavage. The following results were obtained: 1) Age ranged from 17 to 72 years-old with the mean age of 36.7; there was no difference of age between the nonsmoker and the smoker gorup. Male to female ratio was 2.43:1 for total group, 1.15:1 for nonsmokers, and 19:1 for smokers. 2) The diagnoses of the patients were undetermined in 41.9%, healed pulmonary tuberculosis in 37.5%, laryngitis or pharyngitis in 10.4% and others in 10.4%. 3) Total cell number of the recovered fluid by bronchoalveolar lavage was significantly higher in male[$9.6{\pm}6.2({\times}10^6)$] than in female[$5.1{\pm}3.0({\times}10^6)$](p<0.05), and there was no significant difference in the total cell number between the smokers and nonsmokers [$9.3{\pm}5.8({\times}10^6)$ vs $7.5{\pm}5.8({\times}10^6)$]. 4) The differential count of the cells from bronchoalveolar lavage fluid had no difference between the nonsmokers and the smokers. 5) There was no correlation between the total cell count and smoking or age. 6) In the smoker group, there was no correlation between the amount of smoking and the total cell count of the bronchoalveolar fluid. In conclusion, it should be careful to regard the patients with symptoms or minor radiologic abnormalities as a control group in bronchoalveolar lavage study and further study of cell analysis in bronchoalveolar lavage will be needed between smoker and nonsmoker in the male and female healthy people.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.1
• /
• pp.11-17
• /
• 2003

As a pan of a study on effective use of seafood processing by-products, such as cuttle bone as a calcium source, we examined on the kind of organic acid (acetic acid and lactic acid), reaction concentration (mole ratio of calcium to mole of organic acid), reaction temperature $(20\~60^{\circ}C)$ and reaction time (6$\~$24 hours) as reaction conditions for the solubility improvement of cuttle bone powder. The high soluble cuttle bone powder was also prepared from the optimal reaction conditions and partially characterized. From the results on examination of reaction conditions, the high soluble cuttle bone powder was prepared with 0.4 in mole ratio of a calcium to mole of a acetic acid at room temperature for 12 hours, Judging from the patterns of IR and X-ray diffraction, the main component of the high soluble cuttle bone powder was presented as a form of calcium acetate, and a scanning electron micrograph showed an irregular form. The soluble calcium content in the high soluble cuttle bone powder was $5.3\%$ and it was improved about 1,380 times compared to a raw cuttle bone powder. For the effective use of the high soluble cuttle bone powder as a material for a functional improvement in processing, it should be used after the calcium treatment at room temperature for about 1 hour in tap water or distilled water. from these results, we concluded that it is possible to use the high soluble cut시e bone powder as a material for a functional improvement in processing.

• Journal of Chest Surgery
• /
• v.32 no.9
• /
• pp.790-798
• /
• 1999

Background: As the early outcome after coronary artery bypass grafting(CABG) has been stabilized, neurologic complication has now become one of the most important morbidity. The aim of this study was to find out the risk factors associated with the neurologic complications after CABG. Material and Method: In 351 patients who underwent CABG, the incidence and features of neurologic complications, with associated perioperative risk factors, were retrospectively reviewed. Neurologic complication was defined as a new cerebral infarction confirmed by postoperative neurologic examination and radiologic studies, or delayed recovery of consciousness and orientation for more than 24 hours after the operation. Result: Neurologic complications occurred in 18 patients(5.1%), of these nine(2.6%) were diagnosed as having new cerebral infarctions(stroke). Stroke was manifested as motor paralysis in four patients, mental retardation or orientation abnormality in four, and brain death in one. Statistical analysis revealed the following variables as significant risk factors for neurologic complications by both univariate and multivariate analyses: cardiopulmonary bypass longer than 180 minutes, atheroma of the ascending aorta, carotid artery stenosis detected by Duplex sonography, and past history of cerebrovascular accident or transient ischemic attack. Age over 65 years, aortic calcification detected by simple X-ray, and intraoperative myocardial infarction were significant risk factors by univariate analysis only. Neither the severity of carotid artery stenosis nor technical modifications such as cannulation of the aortic arch or single clamp technique, which were expected to affect the inciden e of neurologic complications, had significant relationship with the incidence. Conclusion: This study confirmed the strong association between neurologic complications after CABG and atherosclerosis of the arterial system. Therefore, to minimize the incidence of neurologic complications, systematic evaluation focused on atherosclerotic lesions of the arterial system followed by adequate alteration of operative strategy is needed.

• Conservation Science in Museum
• /
• v.24
• /
• pp.1-16
• /
• 2020

This paper presents the process of re-conservation and the results of research on the production method of the Iron Sword with Ring Pommel with Three-Pointed Leaf Decoration, one of the excavation findings from Tomb No. 55 in the Dalseong Ancient Tomb Complex in Daegu. This iron sword is a double weapon with two large swords housed within a single sheath. Four smaller swords are attached to the surface of the sheath, two on the upper portion and the other two below. It is the only such two-in-one weapon excavated intact thus far from an ancient Korean tomb. The records show that it underwent conservation treatment twice in the past. In this study, it was subjected to conservation treatment again to replace the stiffener in some cracking areas, and its material, composition, and production method were analyzed by CT, XRF analysis, and stereoscopic microscopy. The sword is mainly made of copper, but the golden component contains both gold and mercury, which suggests that the copper was plated in gold using mercury amalgamation. The examination of the production methods indicates that it was intended more to demonstrate the authority of its owner rather than to serve any practical use. The two upper small swords on the sheath were made in the same manner as the main swords, and the two small lower swords were cut from a single metal sheet. The sheath was made by cutting two metal sheets. Supports were used to attach the two small swords to the upper portion of the sheath, while the lower portion of the sheath was slit to allow the other two small swords to be inserted into it. The ring pommels of the main swords have a three-pointed leaf decoration. As for the other designs, the handle of the main sword features a series of semicircles, the decorative bands on the sheath have waves in dots, and the fish tail of the sheath shows diagonal lines of dots.

• Journal of the Korean Society of Radiology
• /
• v.17 no.6
• /
• pp.903-909
• /
• 2023

The purpose of this study is to compare and analyze the effect of changes in the patient's central position on the exposure dose and image quality of surrounding organs during a chest lateral examination using an Auto Exposure Control(AEC). The experiment was conducted on a human body phantom. A needle was attached to the lower part of the center of the coronal plane of the phantom, and a lead ruler was attached to the lower part of the detector so that the 50 cm point was located at the lower center of the AEC ion chamber. The exposure conditions were 125 kVp, 320 mA, the distance between the source and the image receptor was 180 cm, and the exposure field size was 14 × 17 inches. Only one AEC ion chamber was used at the bottom center, and the density was set to '0' and sensitivity to 'Middle', and the central X-ray was incident vertically toward the 6th thoracic vertebra. With AEC mode applied, the 50 cm point of the needle and lead ruler were aligned and the phantom was moved 5 cm toward the stomach (F5) and 5 cm toward the back (B5), and the dose factor was analyzed by measuring ESD. The ESD of the thyroid gland according to the change in patient center position was 232.60±2.20 μGy for Center, 231.22±1.53 μGy for F5, and 184.37±1.19 μGy for B5, and the ESD of the breast was 288.54±3.03 μGy for Center, F5 was 260.97±1.93 μGy, B5 was 229.80±1.62 μGy, and the ESD of the center of the lung was 337.02±3.25 μGy for Center, F5 was 336.09±2.29 μGy, and B5 was 261.76±1.68 μGy. As a result of comparing the average values of dose factors between each group, the difference in average values was statistically significant (p<0.01), and each group appeared to be independent. As a result of the study, there was no significant difference in the dose to the thyroid, breast, and center of the lung according to the change in the patient's central position, except for the breast (10%) when the patient moved forward about 5 cm. However, movement of about 5 cm posteriorly resulted in an average dose reduction of 23.7%. Additionally, when the patient's central position was moved to the rear, image quality deteriorated.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.200-211
• /
• 2022

The celadon stools with an openwork ring design which consist of four items as one collection were excavated from Gaeseong, Gyeonggi-do Province. The celadon stools were designated and managed as treasures due to their high arthistorical value in the form of demonstrating the excellence of celadon manufacturing techniques and the fanciful lifestyles during the Goryeo Dynasty. However, one of the items, which appeared to have been repaired and restored in the past, suffered a decline in aesthetic value due to the aging of the treatment materials and the lack of skill on the part of the conservator, raising the need for re-treatment as a result of structural instability. An examination of the conservation condition prior to conservation treatment found structural vulnerabilities because physical damage had been artificially inflicted throughout the area that was rendered defective at the time of manufacturing. The bonded surfaces for the cracked areas and detached fragments did not fit, and these areas and fragments had deteriorated because the adhesive trickled down onto the celadon surface or secondary contaminants, such as dust, were on the adhesive surface. The study identified the position, scope, and conditions of the bonded areas at the cracks UV rays and microscopy in order to investigate the condition of repair and restoration. By conducting Fourier-transform infrared spectroscopy(FT-IR) and portable x-ray fluorescence spectroscopy on the materials used for the former conservation treatment, the study confirmed the use of cellulose resins and epoxy resins as adhesives. Furthermore, the analysis revealed the addition of gypsum(CaSO₄·2H₂O) and bone meal(Ca₁₀ (PO₄)₆(OH)₂) to the adhesive to increase the bonding strength of some of the bonded areas that sustained force. Based on the results of the investigation, the conservation treatment for the artifact would focus on completely dismantling the existing bonded areas and then consolidating vulnerable areas through bonding and restoration. After removing and dismantling the prior adhesive used, the celadon stool was separated into 6 large fragments including the top and bottom, the curved legs, and some of the ring design. After dismantling, the remaining adhesive and contaminants were chemically and physically removed, and a steam cleaner was used to clean the fractured surfaces to increase the bonding efficacy of the re-bonding. The bonding of the artifact involved applying the adhesive differently depending on the bonding area and size. The cyanoacrylate resin Loctite 401 was used on the bonding area that held the positions of the fragments, while the acrylic resin Paraloid B-72 20%(in xylene) was treated on cross sections for reversibility in the areas that provided structural stability before bonding the fragments using the epoxy resin Epo-tek 301-2. For areas that would sustain force, as in the top and bottom, kaolin was added to Epo-tek 301-2 in order to reinforce the bonding strength. For the missing parts of the ring design where a continuous pattern could be assumed, a frame was made using SN-sheets, and the ring design was then modeled and restored by connecting the damaged cross section with Wood epos. Other restoration areas that occurred during bonding were treated by being filled with Wood epos for aesthetic and structural stabilization. Restored and filled areas were color-matched to avoid the feeling of disharmony from differences of texture in case of exhibitions in the future. The investigation and treatment process involving a variety of scientific technology was systematically documented so as to be utilized as basic data for the conservation and maintenance.