• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.273-286
• /
• 2009

The objective of this research is to evaluate both quantitative analysis and qualitative analysis by comparing vital variable factors of the golf swing successes and the failures. At the moment of swing, each body segment and the movement of the club as well as kinematical parameters were produced by utilizing the 3-D swing analysis for the high school female golfers. As kinematical parameters, it analyzes the 3-D analysis and ground reaction force about the location change, velocity and angle. The 3-D swing analysis and ground reaction force location change, velocity and angle are analyzed for Kinematical parameters. As a result, the stable swing is maintained by club head showing very few front-back movement (X) when the address and the top swing. Also, the center of mass velocity contributes to the momentum increase by showing very rapid velocity when successful comparing with when failed at the time of top swing of left-right(Y) and it is thought that by lessening the cocking angle when successful from the top swing to the impact, it influences the linear velocity increase and has a good effect on a non-distance increase. It shows that Ground reaction force (GRF) is examined by showing the stable approval rating in a front-back(X) direction and left-right(Y) and connected to a successful swing.

• Journal of the Korean Society of Food Culture
• /
• v.13 no.1
• /
• pp.37-46
• /
• 1998

Distribution structure is the link between a society's needs and its industrial responses. A change in distribution structure brings about a consumption structure which may results in considerable changes in lifestyle including food habits. The purpose of this study was to evaluate a effect of change of distribution structure on the food purchase. The survey was carried from May to June, 1997 by way of questionnaire of 407 housewives, aged 23-64 years, in Seoul and the capital area. The questionaire consists of sociodemographic characteristics of the subjects and distribution channel, information route of food selection, acknowledgement and coefficient of utilization of new distribution channel, mainly used distribution channel in food purchase, important factors in food selection, and food purchasing behavior. Their data were statistically analyzed based on frequency, mean, and $X^2-test$. The major findings of this study were as follows; 1) Most frequently used distribution channels in food purchase were supermarket(38.53%), department store(15.23%), discount store(14.05%), a conventional retail market(13.87%), membership wholesale club(8.07%), and a conventional wholesale market(6.53%). 2) The new distribution channels that subjects have ever used were discount store(75.4% of the subject), membership wholesale club(63%), mail order house(32%), outlet store(29.4%), home shopping(10.3%). 3) Compared to the subject living far from the new distribution channel, the subject living close to the new distribution channel was higher in frequency of new distribution channel utilization. These observations suggest that change of the distribution structure promotes the change of the food purchasing behavior.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.4
• /
• pp.447-455
• /
• 2010

The objective of this study was to analyze the difference in kinematic variables for successful and unsuccessful golf putting strokes. The study population included 8 male secondary school golf players who had played golf for over 3 years and whose handicap was 4 or lower. A hole was made on a 5-m-long artificial flat mat for practice, and an environment similar to that of a real green was created. The participants' motions were analyzed through 3D image analysis, and the difference in kinematic variables for successful and unsuccessful putting strokes in the same direction was determined. Data analysis revealed the following findings: The time spent for a segment of putting was the greatest for the backswing segment for both successful and unsuccessful strokes. During address and impact, the both changed to a larger extent. For successful putting strokes, the change in the elbow angle during the downswing was greater for the right elbow than for the left elbow. For both successful and unsuccessful putting strokes, the left shoulder angle increased during the segment from address to the turning point and decreased during the segment from the turning point to impact. In contrast, the right shoulder angle significantly differed between successful and unsuccessful putting strokes only during address. During successful and unsuccessful motions, the swing was executed with the moving displacement of the X-axis of the club head maintained almost constant along a straight light without back and forth movement. In the backswing segment, moving displacement of the Y- and Z-axes was greater in successful strokes than in unsuccessful strokes; however, this difference was very small for the Y-axis. The velocity of the club head for successful and unsuccessful motions significantly differed during address and at the turning point. The highest velocity of the ball was greater for successful than for unsuccessful putting strokes.

• Ocean Systems Engineering
• /
• v.5 no.1
• /
• pp.31-40
• /
• 2015

Three dimensional (3D) non-linear finite element analysis of offshore pipeline is investigated in this work with the help of general purpose software Abaqus. The general algorithm for the finite element approach is introduced. The 3D seabed mesh, limited to a corridor along the pipeline, is extracted from survey data via Fledermous software. Moreover soil bearing capacity and coefficient of frictions, obtained from the field survey report, and are introduced into the finite element model through the interaction module. For a case of study, a 32inch pipeline with API 5L X65 material grade subjected to high pressure and high temperature loading is investigated in more details.

• Research in Community and Public Health Nursing
• /
• v.26 no.2
• /
• pp.128-139
• /
• 2015

Purpose: The purpose of this study was to identify factors affecting health promotion behavior among workers with high risk of metabolic syndrome. This study was based on the planned behavior theory. Methods: The participants were 167 workers at high risk of metabolic syndrome. Data were collected using a structured questionnaire. Surveyed variables were attitude, subjective norm, perceived behavioral control, intention, and health promotion behavior. Data were analyzed using descriptive statistics, t-test, ANOVA, Pearson's correlation coefficients, and hierarchical regression analysis with SPSS/WIN 22.0. Results: Perceived behavioral control affected the intention of health promotion behavior among the workers with high risk of metabolic syndrome. It explained 62% of variance in the intention of health promotion behavior (F=40.09, p<.001). Perceived behavioral control and occupation affected health promotion behavior among the risk workers with high risk of metabolic syndrome. The two factors explained 16% of variance in health promotion behavior (F=4.95, p<.001). Conclusion: The findings of this study suggest that perceived behavioral control is the only factor affecting health promotion behavior when the theory of planned behavior was applied. Therefore, intervention programs for improving health promotion behavior should be focused on strengthening perceived behavioral control.

• Korean Chemical Engineering Research
• /
• v.54 no.5
• /
• pp.636-647
• /
• 2016

Magnetite nanoparticles ($Fe_3O_4$ NPs) were synthesized by co-precipitating method under optimized condition. The $Fe_3O_4$ NPs coated with sodium dodecyl sulfate-thenoyltrifluoroacetone ($Fe_3O_4$ NPs-SDS-TTFA) were then exerted as the magnetic solid phase extraction (MSPE) adsorbent for the extraction process prior to introducing to a flame atomic adsorption spectrometry (FAAS). The synthesized $Fe_3O_4$ NPs-SDS-TTFA were applied for the extraction of Pb(II) ions from different water samples. The characterization studies of nanoparticles were performed via scanning electron microscopy-energy dispersive micro-analysis (SEM-EDAX), X-ray diffraction (XRD) and vibrating sample magnetometer (VSM) techniques. The substantial parameters affecting the extraction efficiency were surveyed and optimized. A dynamic linear range (DLR) of $10-400{\mu}g\;L^{-1}$ was obtained and the limit of detection (LOD, n=7) and relative standard deviation (RSD%, n= 6, $C=20{\mu}g\;L^{-1}$) were found to be $2.3{\mu}g\;L^{-1}$ and 1.9%, respectively. According to the results, the proposed method successfully applied for the extraction of Pb(II) ions from different environmental water samples and satisfactory results achieved.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.2
• /
• pp.167-174
• /
• 2010

This study aims to quantitatively compare and analyze kinetic variables in the motion of male and female professional golfers to suggest basic scientific materials for golf iron swing. Five male and five female professional golfers participated in this experiment. Ground reaction force and foot pressure were measured during performing 10 swings for each participants using an iron club. The result of the ground reaction force indicates that the force occurs at the left foot toward right(-) direction in the mid-downswing(E3) and impact(E4) events in X-axis, while it occurs at the right foot toward anterior(-) direction in Y-axis for both male and female, showing a big difference between them. Also, in Z-axis, large force occurs at the left foot in most events. The analyzed result on foot pressure indicates that men have the highest pressure and area at the left foot, and women have the highest ones at the right foot in the mid-downswing(E3) and impact(E4) events in the max foot pressure, ground contact area and average pressure. It is considered that there is difference of central movement methods between men and women. Thus, different education and training on golf swing should be necessary by gender due to their different patterns of golf iron swing.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.4
• /
• pp.339-347
• /
• 2014

The purpose of this study was to investigate joint torques of lower body segments on professional golfers. Three dimensional swing analysis was conducted on the seven subjects. Each subject was asked to swing with 45 inches of Callaway driver, where two force plates (9286AA, Kistler, Switzerland) were built, with his normal speed and tempo. The resultant joint moments of the lower extremities were computed using the kinematic variables of the segments, anthropometric measures and the ground reaction force data by inverse dynamics method. Based on the results of this study, the following conclusions were drawn; It was found that the left ankle joint torque at 3rd phase was increased toward extension on the X-axis and abduction on the Y-axis. The left knee joint torque was alternated from flexion to extension direction in order to lower down the body weight at the beginning of the downswing. The lumbar joint torque was alternated from flexion to extension in order to speed up the upper body rotation which could increase the club head speed ultimately.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.10
• /
• pp.4599-4608
• /
• 2016

Background: The x-ray repair cross-complementing group 3 (XRCC3) encodes a protein involved in the homologous recombination repair (HRR) pathway for double-strand DNA repair. Associations of the XRCC3 Thr241Met polymorphism with various cancers have been widely reported. However, published data on links between XRCC3 Thr241Met and gastrointestinal (GI) cancer risk are inconsistent. Objective and Methods: A meta-analysis was conducted to characterize the relationship between XRCC3 Thr241Met polymorphisms and GI cancer risk. Pooled odds ratios (ORs) and 95.0% confidence intervals were assessed using random- or fixed- effect models for 28.0 relevant articles with 30.0 studies containing 7,649.0 cases and 11,123.0 controls. Results: The results of the overall meta-analysis suggested a borderline association between the XRCC3 Thr241Met polymorphism and GI cancer susceptibility (T vs. C: OR=1.18, 9 % CI=1.0-1.4, POR=0.04; TT vs. CT+CC: OR=1.3, 95 % CI=1.0-1.6, POR=0.04). After removing studies not conforming to Hardy-Weinberg equilibrium (HWE), however, this association disappeared (T vs. C: OR=1.00, 95 % CI=0.9-1.1, POR=0.96; TT vs. CT+CC: OR=0.9, 95 % CI=0.8-1.1, POR=0.72). When stratified by ethnicity, source of controls or cancer type, although some associations between XRCC3 Thr241Met polymorphism and GI cancer susceptibility were detected, these associations no longer existed after removing studies not conforming to HWE. Conclusion: Our meta-analysis suggests that the XRCC3 Thr241Met polymorphism is not associated with risk of GI cancer based on current evidence.

• The Journal of the Korea Contents Association
• /
• v.13 no.10
• /
• pp.523-532
• /
• 2013

When the golf club hits the ground prior to making contact with the golf ball, we define it as 'fat shot'. The aim of this research was to investigate the difference between normal shot and fat shot in golf. Five candidates playing as recreational golfer participated in this research and they were all right-handed people. Time phase between each event, wrist cocking angle, elbow extension-flexion angle, backswing height, pelvis angle, thorax angle, L-GRF, R-GRF, pelvis linear velocity, pelvis angular velocity and COG path were calculated. For statistical analysis the paired T-test was used. An early un-cocking, an early right elbow extension and impact with leaving their weight behind foot were not reasons of fat shot. Backswing height, X-Factor, pelvis angle and thorax rotation angle were not different between normal shot and fat shot. But we could find a pattern of abrupt pelvic movement and weight shift to target direction just before impact in case of fat shot. In addition fat shot showed time-delayed and small value of pelvis linear velocity pattern to upward during downswing phase as against normal shot.